Best Band Saw Blades For Metal (2024 Updated)
When it comes to finding the right band saw blades for metal, there are a few key points to consider. First of all, you need to think about the type of saw blade you need and the material that the blade is made from. You also need to consider the size and tooth count of the blade, as well as the speed and tension of the blade. Finally, you should compare prices to make sure you are getting the best deal. In this short guide, we will provide an overview of these five key points so you can make an informed decision when it comes to selecting the right band saw blades for metal.
When selecting a band saw blade for metal, the type of blade is the most important factor. Different blades are designed for different purposes, so you need to make sure you are getting the right one for the job. Generally, there are two types of blades available: those with a continuous tooth design, and those with a variable-pitch tooth design. Each type has its own advantages and disadvantages, so you should do your research and make sure you are getting the right blade for the job.
The material the blade is made from is also important. Generally, blades for metal are made from either carbon steel or high-speed steel. Carbon steel blades are less expensive and provide a good balance between durability and performance, while high-speed steel blades are more expensive but offer superior performance.
In addition to the type of blade and material, you also need to consider the size and tooth count of the blade. The size of the blade is important because it should match the size of the material you are cutting. The tooth count is important because it affects the speed and efficiency of the cut. Generally, higher tooth counts provide faster cuts, but they also wear out more quickly.
Finally, you should consider the speed and tension of the blade. The speed should match the material you are cutting and the tension should be adjusted to ensure the blade is running at its optimal performance. If the tension is too low, it can cause the blade to vibrate and produce a poor cut. If the tension is too high, it can cause the blade to overheat and cause damage.
By considering these five key points when selecting a band saw blade for metal, you can ensure you are getting the right blade for the job. Do your research, compare prices, and make sure you are getting the best deal. With the right blade, you can make sure your metal-cutting projects turn out perfect every time.
10 Best Band Saw Blades For Metal
| # | Product Image | Product Name | Check Price |
|---|---|---|---|
|
1
|
 |
|
|
|
2
|
 |
|
|
|
3
|
 |
|
|
|
4
|
 |
|
|
|
5
|
 |
|
|
|
6
|
 |
|
|
|
7
|
 |
|
|
|
8
|
 |
|
|
|
9
|
 |
|
|
|
10
|
 |
|
1. Kaka Bs-712n 7"x12" Horizontal Band Saw, Metal Cut, 1.5hp Motor (115v/230v 1ph).
The KAKA Industrial BS-712N is a horizontal band saw designed for cutting metal. It features a powerful 1.5 horsepower motor that can be pre-wired for 115V, but can also be rewired for 230V. The saw also boasts a quick clamp vise that can be rotated from 0-45 degrees for precise cutting.
The saw is equipped with a hydraulic feed system, which allows users to adjust the feed-rate for a perfect cut. Additionally, the saw comes with a coolant system for maximum efficiency and two movable wheels for easy portability.
This band saw is the perfect tool for home and small business use. The saw is well-suited for a range of projects, such as cutting bars, pipes, and rails. It is a great tool for any serious hobbyist or professional. With its high quality construction, the BS-712N can handle tough jobs with ease.
The KAKA Industrial BS-712N is a fantastic choice for anyone looking for a reliable and powerful horizontal band saw. Whether you’re a hobbyist, a small business, or a professional, this saw will get the job done. With its adjustable feed rate and rotatable vise, you can be sure to get an accurate and precise cut every time. And with its coolant system and movable wheels, you can be sure of maximum efficiency and easy portability.
2. Rikon 4" X 6" Metal Cutting Bandsaw, 3/4 Hp, 3 Blade Speeds.
The RIKON Power Tools 15-400 Horizontal and Vertical 4" x 6" Metal Cutting Bandsaw is the perfect tool for precision cutting of metal. This powerful saw features a 3/4 horsepower motor, giving it the strength and capability to cut through even the toughest materials. The built-in vise clamps and three adjustable blade speeds — 80, 120 and 180 feet per minute — offer greater control over the cutting process.
The 15-400 is designed with safety in mind. An auto-off safety paddle switch allows the user to easily turn the saw off when not in use. And its hands-free setting makes it easy to use without having to hold down a button or switch.
The 15-400 is versatile, allowing the user to switch between horizontal and vertical cutting. This makes it perfect for a variety of applications and materials, including pipe, angles, tubes, rods, and other metals. The saw also offers an adjustable blade guide to help ensure accuracy and precision.
This saw is easy to use and requires minimal maintenance. Its heavy-duty construction ensures reliability and longevity, making it an ideal choice for anyone looking for a dependable and powerful cutting tool. With its adjustable speed and multiple cutting options, the RIKON Power Tools 15-400 Horizontal and Vertical 4" x 6" Metal Cutting Bandsaw is the perfect tool for any metal cutting project.
3. Kaka Bs-712n 7"x12" Horizontal Band Saw, 4 Step Blade Speeds, 1.5hp Motor 115v/230v 1ph.
The KAKA Industrial horizontal band saw BS-712N is an incredibly versatile and efficient metal cutting saw for both home and small business use. With a powerful 1.5 horsepower motor pre-wired for 115 volts and the option to convert to 230 volts, this machine is up to any task. The quick clamp vise can be rotated up to 45 degrees to accommodate a variety of angles and the hydraulic feed allows you to precisely adjust the feed rate. In addition, the saw comes with a cooling system and movable wheels for easy transport.
This horizontal band saw is designed to make precise and accurate cuts in a variety of materials. It has a 7" x 12" cutting capacity and four step blade speeds that are driven by a pulley wheel. The machine is constructed using high-grade steel and features a heavy-duty design for added durability. The saw is equipped with a heavy-duty work table, adjustable guide arms, and a blade guide that can be easily adjusted for the best performance. The saw also features a safety switch to ensure safe operation.
The KAKA Industrial horizontal band saw BS-712N is designed to be user-friendly and easy to operate. The ergonomic design makes it easy to access and use the controls, while the adjustable blade speed and feed rate allow you to tailor your cuts to the material being cut. The saw is also equipped with a coolant system to keep the blade cool during operation.
The KAKA Industrial horizontal band saw BS-712N is a powerful and efficient metal cutting saw that is perfect for both home and small business use. The adjustable features and powerful motor make it a great choice for any metal cutting job. With its durable construction, adjustable blade speed and feed rate, and easy operation, this saw is sure to provide you with a clean and accurate cut every time.
4. Kaka Industrial Bs-912b 9" Horizontal Metal Band Saw, 4 Speed, 115v/230v Dual Voltage.
This KAKA Industrial BS-912B horizontal bandsaw is the perfect tool for all metalworking projects. This 9" horizontal metal cutting band saw includes four steps of blade speed and is a dual voltage machine, prewired for 1PH use at either 115V or 230V. It also features a built-in coolant system with flow control valve on both blade guides for maximum cutting efficiency. The machine also features an adjustable vice that allows for mitre cuts up to 45 degrees. In addition, an automatic electric cut-out switch stops the machine when the cut is complete.
This space-saving, movable metal cutting band saw is ideal for both professional and home use. It is designed for easy use, with simple set-up and operation. The wide working table provides a sturdy and safe base for accurate cuts. It also features built-in adjustable blade guides that help maintain accuracy and reduce blade wear. The band saw can handle a variety of materials, ranging from thin to thick metals.
The KAKA Industrial BS-912B horizontal bandsaw is the perfect solution for all your metalworking needs. It is a high-quality product that is designed to deliver reliable and accurate cuts. With its simple and easy-to-use features, it is sure to increase productivity and efficiency. This powerful band saw is sure to be an invaluable addition to any workshop.
5. Bi-Metal Band Saw Blade, 64-1/2" X 1/2" X 10/14tpi, M42, For Metal
This Imachinist S6412121014 Bi-Metal Band Saw Blades 64-1/2" X 1/2" X 10/14TPI Variable Teeth M42 is the perfect choice for those looking for a blade made for cutting soft metal. Crafted with high-speed steel M42 grade, this 64-1/2” long, 1/2” wide, and 0.025” thick blade is designed to fit all bandsaws that use a 64-1/2” long and 1/2” wide band saw blade.
The 10/14TPI is a variable teeth profile with a big teeth distance of 2.5mm per teeth and a small teeth distance of 1.8mm per teeth. This profile is perfect for cutting solid bar and hollow tube, as well as profile.
This bi-metal blade is designed for superior performance and longevity. The M42 grade of the blade is perfect for cutting soft metal, actively reducing heat build-up for a more efficient cut. With the 10/14TPI variable teeth profile, it is ideal for cutting solid bar and hollow tube, as well as profile. It is also designed to fit all bandsaws that use a 64-1/2” long and 1/2” wide blade.
Imachinist S6412121014 Bi-Metal Band Saw Blades 64-1/2" X 1/2" X 10/14TPI Variable Teeth M42 is the perfect choice for those looking for a blade made for cutting soft metal. The 10/14TPI variable teeth profile is designed for superior performance and longevity, actively reducing heat build-up for a more efficient cut. With a big teeth distance of 2.5mm per teeth and a small teeth distance of 1.8mm per teeth, this blade is perfect for cutting solid bar and hollow tube, as well as profile. It is also designed to fit all bandsaws that use a 64-1/2” long and 1/2” wide blade.
6. Baileigh Bs-210m Horizontal Band Saw, 3/4" Blade, 1hp, 110v
The Baileigh BS-210M Horizontal Band Saw has been designed to provide clean and accurate cuts for a variety of applications. This machine is constructed from a cast iron saw head and bow which helps to reduce vibration and make sure that each cut is precise. A controlled hydraulic descent allows you to choose the right speed for a given application, while an inverter-controlled variable blade speed from 66 to 280 feet per minute allows for quality cuts.
The BS-210M is fitted with adjustable blade guides that are attached to sealed ball bearings for precise alignment. This machine also features a fully-welded steel plate frame which gives it the structural strength to cut at maximum capacity. For added safety, this saw also has an automatic shutoff feature which ensures that the blade stops once it finishes cutting the metal.
The Baileigh BS-210M Horizontal Band Saw is the perfect choice for those who need a reliable and efficient machine that can handle a wide range of materials. With its clean and accurate cuts, adjustable blade guides, and controlled hydraulic descent, this saw will make quick work of any project. It is an ideal choice for workshops, factories, and other industrial settings that require precise cutting.
7. Imachinist S9351214 Metal Cutting Bi-Metal Band Saw Blades 93-1/2" X 1/2" X 14tpi
The Imachinist S9351214 Metal Cutting Bi-Metal Band Saw Blades are the perfect solution for anyone looking for a reliable and efficient way to cut through soft metals. Measuring 93-1/2" in length, and 1/2" wide, these blades feature 14 teeth per inch (TPI), with a fixed teeth profile and teeth distance of 1.8mm per teeth. This 14TPI is ideal for cutting thin pipe tube profiles, making it perfect for a wide range of applications.
These blades are designed to fit all bandsaws that measure 93-1/2" in length and 1/2" in width, making them the perfect solution for any metal cutting project. The high quality bi-metal construction ensures these blades are strong, durable and able to withstand the toughest of cutting jobs. A highly efficient cutting performance makes them ideal for any professional or DIY enthusiast looking for a reliable and efficient way to cut through soft metals.
The Imachinist S9351214 Metal Cutting Bi-Metal Band Saw Blades are the perfect choice for anyone looking for a reliable, efficient and cost effective way to cut through soft metals. Their strong and durable construction ensures a highly efficient cutting performance, making them the perfect solution for any metal cutting job. Whether you’re a professional or a DIY enthusiast, these blades are sure to provide an excellent cutting performance.
8. Imachinist S64514 Bi-Metal Band Saw Blades 64-1/2" X 1/2" X 14tpi For Cutting Soft Ferrous Metal
The Imachinist S64514 Bi-Metal Band Saw Blades are the perfect choice for cutting soft ferrous metal. These 64-1/2" long, 1/2" wide blades are made of M42 grade high speed steel, with a thickness of 0.025". They feature a 14TPI teeth profile, which is ideal for creating thin pipe tube profiles and other intricate shapes. With a teeth distance of 1.8mm per tooth, these blades can be used with all bandsaws that accept 64-1/2" long, 1/2" wide band saw blades.
These bi-metal blades offer superior cutting performance and are designed for maximum durability and longevity. They are made from high quality materials and feature a precise tooth profile for smoother, cleaner cuts. The blades are heat treated for strength, and are designed to resist wear and tear from repeated use.
The Imachinist S64514 Band Saw Blades are the perfect choice for cutting a variety of soft ferrous metals. They provide precise, clean cuts without the need for sharpening and offer long lasting performance. They are perfect for creating intricate shapes and profiles, and are a great choice for any woodworking project. Whether you are a professional or an amateur woodworker, these blades will help you get the job done quickly and efficiently.
9. Bosch Bs6412-24m 64-1/2-Inch By 1/2-Inch By 24tpi Metal Bandsaw Blade
The Bosch BS6412-24M 64-1/2-Inch by 1/2-Inch by 24TPI Metal Bandsaw Blade is a premium grade steel blade that provides superior heat resistance and longer life. It has an optimized tooth geometry for the best cutting performance, allowing you to make accurate and precise cuts on a variety of materials.
This metal bandsaw blade is designed to provide you with the utmost reliability and performance. The blade is made of premium grade steel, which resists heat build up, providing you with a longer blade life. The optimized tooth geometry ensures that you are getting the best cutting performance. The package dimensions of the blade are 2.794 L x 26.797 H x 24.765 W (centimeters).
The Bosch BS6412-24M 64-1/2-Inch by 1/2-Inch by 24TPI Metal Bandsaw Blade provides you with a reliable and efficient way to make accurate cuts on a variety of materials. It is made of premium grade steel for superior heat resistance, and optimized tooth geometry for the best cutting performance. The package dimensions are 2.794 L x 26.797 H x 24.765 W (centimeters). With this metal bandsaw blade, you can be sure that you are getting a reliable and efficient cutting performance.
10. Lenox Tools Portable Band Saw Blades, 44-7/8" X 1/2" X .020", 14 Tpi, 5-Pack (8010738pw145)
The LENOX Tools Portable Band Saw Blades are designed to make cutting easier and faster. The blades are made of high speed steel teeth which provide a strong, long lasting cutting edge. They are shatter resistant, meaning they can bend and resist breaking, extending blade life. Plus, the Tuff Tooth design reinforces the tooth for longer blade life.
These blades are ideal for cutting a variety of materials, including wood, metal, plastic and more. They feature a 44-7/8 inch x 1/2 inch x .020 inch size and 14 TPI. The package contains 5 blades, making it easy to replace your blades when needed.
The LENOX Tools Portable Band Saw Blades are perfect for a wide range of DIY and professional applications. They offer excellent performance and durability, making them reliable and dependable for any job. Whether you're a hobbyist or a professional, these blades will give you the results you need.
If you're looking for reliable and long lasting blades, the LENOX Tools Portable Band Saw Blades are the perfect choice. With their shatter resistant design, long lasting construction and Tuff Tooth technology, these blades are sure to get the job done quickly and effectively. Plus, with a 5-pack, you'll always have a spare blade on hand. Get your set today and start making the most of your cutting projects.
Best Band Saw Blades For Metal FAQs
Can I put a metal cutting blade on my band saw?
Yes, you can put a metal cutting blade on your band saw, but it is important to use the correct blade and ensure that you follow the manufacturer's instructions for installation, use and maintenance. Metal cutting blades are usually thinner than wood cutting blades and are designed to cut through metal. It is important to use a blade that is rated for the type of metal you are cutting and to make sure that the blade is properly tensioned and aligned. Additionally, use the correct coolant and lubricant to reduce heat buildup and friction which can cause the blade to lose its temper. Finally, make sure to inspect the blade regularly for signs of wear and damage and replace it when necessary.
How do I choose a metal band saw blade?
When choosing a metal band saw blade, it is important to consider the type of material you are cutting, the size of the material, and the thickness of the blade. For most general purpose metal cutting, a bimetal blade with a variable tooth pitch is the best choice. This type of blade is designed to cut a wide range of materials, from aluminum to stainless steel. When choosing a blade size, measure the maximum width of the material you are cutting. It is also important to select a blade with the proper thickness for the job. Thicker blades will make smoother cuts, but may be too aggressive for some materials. Lastly, consider the type of cut you will be making. A hook-toothed blade is better for cutting curves and tight turns, while a skip-toothed blade is better for straight cuts. With a bit of research and careful consideration, you can select the perfect metal band saw blade for your job.
What blade is best for cutting metal?
For cutting metal, the best blade is usually one with a high-speed steel (HSS) or high-carbon steel (HCS) edge. HSS blades can cut through any type of metal, while HCS blades are best for softer metals. Blades with a carbide edge can cut through harder metals, but they are more expensive. When cutting metal, it is important to consider the type of metal and its thickness, as well as the job you are trying to accomplish. For example, if you are cutting thin sheet metal, a fine-tooth blade is ideal, while thicker metal may require a blade with more teeth. Additionally, depending on the job, you may need more power or a different type of blade, such as a bandsaw or jigsaw. Taking the time to choose the right blade for the job will ensure a clean, accurate cut.
What kind of bandsaw blade for metal?
When selecting a bandsaw blade for metal, it is important to consider the type of material, the size of the workpiece, and the desired finish. For cutting ferrous materials, such as steel, a blade with a high-speed steel (HSS) tooth will provide the best performance. HSS blades are strong, wear resistant, and have a long-lasting edge. If a finer finish is desired, a carbide-tipped blade is recommended. Carbide-tipped blades are more costly but can provide a much finer cut and a longer lasting edge. Additionally, for larger workpieces, it is important to select the correct blade width and tooth pitch to ensure a smooth cut. For thinner sheet metal, a blade with a lower tooth pitch and a narrower width is recommended. It is also beneficial to select a blade with a flexible backing to reduce vibration and increase the life of the blade.
