Amp is an abbreviation for amplifier. An amplifier is a device that increases the amplitude of a signal. The kef ls50 meta is a high performance loudspeaker that is designed to produce accurate sound reproduction.
It features a unique meta-material tweeter that delivers extended high frequency response and dispersion. The ls50 meta also features a kef signature Uni-Q driver array that provides a wide and natural soundstage.
20 Best Amp For Kef Ls50 Meta
1. KEF – LS50 Meta Bookshelf Speakers (Pair) – Mineral White
Improving an icon.
Hear the sound, just as it should be, with MAT.
Legendary Uni-Q drive units deliver studio quality sound.
The KEF LS50 Meta – an icon re-invented. No one knew how iconic the orignal LS50 would be. Launched as an anniversary edition to celebrate 50 years of KEF, it made such an impact it stayed in the range full time.
With the design of KEFs new Metamaterial, a dispersion technology applied to the rear of the drive unit, that improves detail by eliminating any rogue frequencies, the LS50 Meta was born.
These Metas are the most extraordinary speakers i’ve owned in 35 years of obsessive hifi buying. You will need patience to get the best from them, but when you hit the sweet spot. wow. Initially, I have to say I was completely underwhelmed.
I couldn’t understand why, when the professional reviews are universally ecstatic. So I read a few user reviews, and found some tips that are invaluable. First off, they took a LONG time to run in – I reckon 150-200 hours – and the difference was extraordinary (i’ve never had a pair of speakers change that much, and I don’t normally believe in running in anyway.
). I also had to play around with positioning quite a lot, although note they come with various foam bungs for the rear ports which really do allow you to tune the sound – so you will find a place that doesn’t compromise your living space.
And you MUST use an amp with decent power (my old Nad 7240PE didn’t cut it, whereas my Rega Aethos sounds incredible). But once they’d run in and i’d got the setup right. BAM. Suddenly the sound stage fell into place, treble opened up, and now they are captivating.
Eg on CD, Michael Jackson “the way you make me feel” slams exultantly, exciting and tight, begging you to turn it up. Radiohead’s “Subterranean Homesick Alien” on vinyl is sweeter than I have ever heard it, and that includes bass that’s surprisingly extended for the size of cabinet, and tighter than you’ll ever hear with a floor stander.
I’ve barely scraped the surface yet on what they can do, but a few weeks in, it’s all looking good. If you bear with them and spend a little time on setting up, you’d find it hard to do better with speakers of double the price.
These were purchased to replace a pair of the old LS50 black special edition speakers which were pretty good them self. The only issue I had with them was with the lack of bass. I suggested a sub or pair of subs which the boss was having none of.
It should be noted that she was perfectly happy with their sound. On a bit of a whim I ordered a pair of the Metas without listening to them. It was always a bit of an issue with my partner that I had got the Black edition instead of the tangerine coloured driver edition, so 2 birds 1 stone I figured.
If i am completely honest I was not really expecting that much of a difference between the 2 sets of speakers. Well I got that wrong! Firstly I really do think the toned down rose finish is lovely, a marked improvement on the originals which were a little too in your face.
They also look better in the flesh than in photos. After setting them on their stands & connecting them to a AXR100 Cambridge amp we listened to a streamed playlist via the Bluesound Node 2i. Straight away it was clear that these are very special speakers.
The clarity, detail & yes, bass compared to the old LS50s was evident without any run in. The music coming out of these little boxes put big smiles on both of our faces. They sound even better now after a couple of weeks of playing.
Of course I’m realistic in what to expect from small standmount speakers concerning bass response, I would still like a sub, but thats not an option my partner will entertain. The bass is very good though & a big improvement.
These are excellent speakers which will be an ideal sonic solution for a lot of people. Kef have taken an iconic speaker & made it even more special. For the price they are they offer exceptional value IMO.
If you are looking for standmount speakers give these a try. & put that smile on your face.
These were paired with an NAD M10V2 – 100 watts. Listening mostly to Qobuz high-res music. I started my speaker journey with Martin Login Motion 4i’s around Christmas and returned them for not enough bass.
I didn’t expect a lot but just wasn’t enough. I traded those for KEF Q150s. They were a big improvement but did not have not enough detail. After reading audiophile reviews on the Sony SSCS5s, I thought I’d try those, and took them back the next day after listening.
Not sure why the rave reviews on those. Sounded flat to me. Then I purchased the KEF LS50 Meta’s in beautiful blue and gold, The blue was lighter than expected but still very nice. Wish they were a darker slate blue to match the online pictures.
The speakers sounded really good at low volume but seemed to get a little muddy at higher volumes. There is a preponderance of midrange and the roll off sound of voices and high notes was just not what I was looking for.
There was plenty of detailed bass produced in my home office environment, in fact I had to plug the ports due to placement near the wall. There is also great soundstage. Something I hadn’t really experienced before and is really pleasing.
Compared to the Q150s, these are much clearer, but maybe not as much depth to the music. If you prefer midrange sound I think you will love the KEFs. I think I’m more of a two-way vee shaped listener so returned the LS50 Metas and bought the JBL L52s instead.
Much happier with the JBL sound and musical depth for my setting. The JBLs sound much bigger than they are. Better separation of bass and treble. Cool retro look. Great bass. Will I keep the JBLs? Can’t say yet but I like these best out of what I have sampled.
Enhance your listening experience with this KEF LSX wireless sound system. Featuring 4-inch Uni-Q drivers and powerful Class D amplifiers, the included speakers deliver clean, vibrant audio across a wide frequency range.
This KEF LSX wireless sound system lets you stream music from a variety of sources with its advanced Wi-Fi and Bluetooth connectivity. Multiroom compatible speakers Play music in multiple rooms at once.
Bluetooth music streaming Makes it easy to enjoy tracks stored on a compatible Bluetooth-enabled device (not included). 2-way speaker system Sends the right frequencies to the right speakers for outstanding audio.
Rich, powerful sound Includes a mid/woofer and a tweeter. aptX codec Offers superior signal-to-noise performance, maximizing audio fidelity, so you can enjoy music playback with near CD-quality sound.
Plays high-resolution digital music files For high-resolution sound. More ways to connect with the music you love Wi-Fi and Bluetooth capability for pairing wireless devices, plus 3. 5mm stereo mini input for wide-ranging compatibility.
Digital audio input (optical) (TOSLINK) Audio line-in (mini-phone stereo 3.5 mm) LAN (RJ-45) Speakers output (RJ-45) Subwoofer output (RCA) DC power output (4 pin USB Type A)
Integrated power supply
AC 100 – 240 V (50/60 Hz)
USB charging (powerbank function)
Dimensions & Weight
Dimensions (WxDxH) / Weight Details
Master speaker: 6.1 in x 7.1 in x 9.4 in / 7.9 lbs Slave speaker: 6.1 in x 7.1 in x 9.4 in / 7.7 lbs
Service & Support
Limited warranty – parts and labor – 1 year
Reviews From Real Customers
In summary loads of connectivity and great sound in a very small package! The sound quality, separation and sound stage KEF produce with the LSX are amazing. I originally owned a Naim atom and KEF LS50’s which is a fantastic system, but decided to look for something smaller that I could fit along side my home theatre setup in one listening area.
So I sold the atom and LS50’s and got two Devialet phantom reactors to run as a stereo pair, which are very good speakers which go unbelievably low and pack a punch but I just felt something was missing from the sound signature i was used to.
So I decided to pickup the KEF LSX and wow, with direct comparison to the reactors I could hear the sound stage was a lot wider and had more separation. Yes the reactors can produce better low end bass and are louder but the LSX just had a better overall sound which engages and pulls you into the music.
But I still had this niggle in my mind if I was 100% happy and If I made the right choice selling the atom and LS50’s. Here’s a big shoutout to RICHER SOUNDS customer service as they allowed me to put my money down for set of KEF LS50 WII and take the display model home to try in my room.
Then I could either return the LSX and the display LS50’s and get a brand new pair of LS50’s or just keep the LSX. Then they would refund me fully depending on my decision. The LS50 WII are more capable speakers but were just too big for my room (which is a small garage conversion) and in my opinion did not offer a big enough improvement over the LSX for the price difference.
I now have no regrets keeping the LSX which really do sound amazing, I have just hooked them up to my KEF T2 subwoofer from my cinema setup and wow this takes them to the next level.
Let’s start with the good news. I have been living with these little boxes for about a month, hooked up to my Tidal account and linked together using the supplied Ethernet cable. (The cable makes an obvious difference in performance) In use, these compact boxes deliver the sort of quality I’d expect from Kef.
Get the placement right and the sound stage is not going to disappoint you – especially with more recent masterings. Trebles twinkle and the mid ranges are tactile. Even the bass response is surprisingly good and detailed for such compact boxes.
Although I’d like to hear them matched up to a decent sub speaker to give them that extra weight. But given the LSXs price point, parting with another £ grand plus for the KC62 seems an unlikely match.
No matter how good the sub might be. Over to you Kef. Can we have a wireless sub to match please? I brought the white speakers because I had concerns over the durability of the fabric covered options.
A bit of style over function? The build quality is great. Nothing cheap feeling about these speakers. Now the bad news. The App. I know I am not the first to mention it but it’s not what you’d expect after spending this much.
I had The Bluesound node2i which didn’t miss a beat. This App really isn’t in the same game and if Kef don’t update this dog soon I will have to spend yet more money on Roon. Tidal is gapless but this App seems to want to put the gaps back in.
Plus it has a nasty habit of cutting the end of tracks short. Argh!!!!! Would I recommend? Depends on you. If you want flexibility with exceptional sound? If you already run your music through Roon? If space is limited and you need hifi that lends itself seamlessly into your digital lifestyle? Then these little boys will tick many boxes.
I wanted to downscale my set up consisting of separates, to focus mainly on streaming, but wanted flexibility of connecting different audio sources including an existing turntable with built in pre-amp.
After expert advice from Brighton Store over email and the phone, KEF LSX seemed to best fit my needs and I bought a mint condition, open box product during lockdown. The sound is phenomenal – when set up and positioned correctly.
They are set up around 1. 7m apart on a shelf, either side of a TV and while they are not Dolby compatible, they have effectively replaced my Pioneer sound bar and 5. 1 system and I’ve not regretted the change.
Note – if connecting a turntable, make sure that you eliminate any potential ground loop feedback, as the 3. 5 aux input is sensitive and generated a 60Hz hum when my Audio Technica TT was connected.
Havinig tried a number of different solutions, including different power extension cables, external pre-amps and ground loop isolators, I have had to ground the TT to the metal ethernet input on the back of the speakers using a ground wire, even though this should not be needed because the Audio Technica has a built-in preamp.
Second issue was discovered a couple of months after purchase – the secondary speaker developed a high-pitch whine when in standby. It was faint but loud enough to be annoying. On this point, I cannot stress enough how great Richer Sounds were in getting this problem fixed.
They took back the speakers and sent them off to KEF who replaced the faulty part. All good so far. This would have been a 5 star review, had it not been for these issues, however, this was an open box purchase.
KC62 is an incredibly compact subwoofer that delivers the might and magic of deep, accurate bass for a thrillingly immersive music, movie and gaming experience. Created using innovative KEF engineering including the ground-breaking Uni-Core technology, the football-sized KC62 features two 6.
5inch force canceling drive units powered by 1,000W RMS of specially designed Class D amplification.
KC62 sounds great , looks great. It’s a perfect match for KEF’s LSX, LS50W etc series of speakers and others too. Fast, deep and puchy bass. Neat, modern design. Lots of flexibility in tuning the subwoofer’s EQ.
If price is not an issue, KC62 is definitely the subwoofer to get for most hifi owners. Build KC62 is solidly built. The metal exterior is solid and the thing is heavy. You really get what you pay for.
Aesthetics: It simply looks great. It has a modern and elegant look. It is also very small, so you place it right at the center of your HIFI setup if you want. Sound: The base is deep, clean and has very fast response.
I pair it with LS50W. It adds so much depth to everything I listen to. The tricky part is to find the right crossover frequency. The beauty with paring with LS50W, LSX or any KEF active series is that the KEF app allows users to adjust both high pass and low pass filter on the fly making it much more convenient to tune the crossover point.
It’s still a time consuming process, but that’s also part of the fun. Power: You can’t beat physics, even with two woofers, they are only 6 inch and you can reach deep bass but not at high volume. Or if you want high volume, it cannot reach as low.
But I feel the the power (pressure) is way more than sufficient for me. Unelss you use it in a huge home theater room, i feel that this is way more than enough. Personally, I dont listen at very high volume, but even that, when watch movies or shows, the subwoofer is already more than powerful for what I need.
If you are a bass head, this may not satify you. Also, this is not for hosting party, banquet. But for majority people who live in apartment, or a regular house, the power of KC62 should be more than suffificent.
Also, I feel that bass does not always have to be at loud volume. It’s the subtle but deep bass that is the most impressive. Setup: With the app, setting much is much easier, But within the app, (for non-KEF active speakers owners), there are still manual knobs at the back of the KC62 to adjust the cross over.
There are also a built-in EQ switches on the back of KC62 to adjust if you are positioning the subwooder at a corner, near a wall or in an apartment. So , the setup process and the amount of freedom in adjustment is above average compared to other subwoofers.
Value: At this list price, this is this very expensive. You can get a larger size SVS subwoofer at almost half the price. If you are looking for value, you won’t find it here. That’s why i am only giving it 4 stars.
If you already own LS50w LS50WII, LSX , LSXII or LS60W, KC62 would match very nicely.
I purchased a pair of these compact K 62 subs & they are phenomenal. It’s a sub that will deliver sub bass (down to 11HZ ~ I challenge you to find that number elsewhere. ) you will notice immediately when watching Netflix series with extended bass.
That said, it’s not overpowering nor meant to be so unless you dial it up that way on the settings. It should also be noted that almost any music will have a substantial presence at the bottom end without feeling overwhelming.
I’m talking about a super tight clean natural bass. I have them mated up with a pair of LS 50 Wireless 2’s and the difference is night and day with the addition of the subs. Well worth the cost of admission.
Highly recommended. I also recommend IsoAcoutics stands for the LS 50 W2’s. This really details the soundstage to whole new levels. Another addition I made is the Furman Elite 20 PFI power conditioner.
This unit made a huge difference in detailing the soundstage, clarity, warmth, and dynamics. Back to the K 62s, I suspect that they’ll put a wide smile on your face.
WOW! I’ve been reading reviews on every sub out there. I’ve been watching reviews on every sub out there. I’ve had my eye on the KC62 for a long time. I seemed to be looking for a reason not to buy it more than a reason to buy it.
The reasons. Size and cost. What a complete waste of time. This little guy weighs a ton and is awesome. It is very well made and matches up perfectly with my LS50s. Not wireless. As soon as I hooked it up it completely changed my listening soundscape.
I have it set up near field for a home office. The LS50s are ear level and the sub is just off to the left and it melds perfectly. The sub made the LS50s much more detailed. I am curious if it would do the same with other speakers.
It’s pricey, but well worth it! Very happy with purchase.
Add 300 watts of clean and stable power to your studio rack using this 300-Watt Studio Audio Amplifier from Monoprice This rack-mountable switching Class D amplifier packs 300 watts of power into a compact form factor, which takes up only 1U of rack space.
It can be used as a stereo amplifier or can be bridged for mono mode. In stereo mode it produces 150 watts per channel RMS (300 watts per channel peak) into a 4-ohm load or 100 watts per channel RMS (200 watts per channel peak) into an 8-ohm load.
When driving a 2-ohm load, it can produce 250 watts per channel RMS (500 watts per channel peak). When bridged for mono mode, the amplifier produces 500 watts RMS (1000 watts peak) into a 4-ohm load and 360 watts RMS (720 watts peak) into an 8-ohm load.
Additionally, it is stable when using reactive or mismatched loads, so for example, you can connect a 2-ohm speaker to one channel and an 8-ohm speaker to the other without any problems. It features an extremely flat 20Hz ~ 20k Hz (+0, -1d B) frequency response with less than 0.
05% Thd+N and more than 96d B signal-to-noise ratio. Built-in protection circuitry includes full short circuit, open circuit, thermal, ultrasonic, and RF protection. It also features power on/off muting function to prevent popping in the speakers when power is turned on or off.
There is also a selectable limiter, which serves as a brick wall on volume to prevent high volume levels from driving the amplifier into clipping, which can cause speaker damage.
The Q550 2. 5-way is far more capable than its compact size might suggest, delivering wide bandwidth and full scale with ease. With the KEF signature Uni-Q driver, a 130mm (5. 25 inch) aluminium bass driver and two matching ABRs the Q550 delivers phenomenal audiophile performance with clarity and power.
Features “Sit anywhere” Uni-Q sound The Uni-Q driver array places the tweeter in the centre of the midrange and bass cone, bringing the acoustic ideal of a single point source closer than ever. The result, enhanced by KEF’s ‘tangerine’ waveguide over the tweeter, is a more accurate three-dimensional sound that’s dispersed evenly throughout the room.
Tweaking the tweeter With the addition of the damped tweeter loading tube providing a gentle termination of sound produced from the back of the tweeter, lower treble performance is improved dramatically and a new low-distortion inductor on the crossover provides cleaner bass.
A word about drums and bass The Q Series reproduces the nuances of bass instruments with ease. With a larger roll surround and new suspension KEF drivers produce cleaner bass at high volumes. A new cone structure improves midrange clarity and an enhanced Auxiliary Bass Radiator (ABR) with a new surround and rear suspension enhances bass quality.
New system design Putting the Uni-Q driver in its own sealed cabinet reduces the load on the cone and increases clarity and detail while delivering cleaner bass. Midrange clarity is enhanced by driver improvements that mean the DC blocking capacitor to be eliminated from the crossover, allowing a more natural roll-off between drivers.
Been using some vintage acoustic research speakers for my L/R mains for many years in a 5. 1. 2 setup. Finally took the plunge and got these Kefs along with the Q650c centre. Don’t have a ton of experience, but I’ve had chances to experience some higher end setups and understand what to look for.
I can say that movie watching experience has been greatly improved. The front soundstage is incredibly crisp and clear without being overly aggressive as to distract from the surround immersion in atmos movies.
Dialog is crystal clear. Sound is pretty neutral, and well balanced. Off axis response is definitely better, as in my old setup only the main listening position was really good. Now I can sit pretty much anywhere and it still sounds amazing.
Dialog sounds natural and much more discerning when panning between the LCR. Can’t comment on bass too much, as I have a dedicated sub which blends in well. Mids and highs are clear though Finish is understated, but very modern.
I love the metallic looking finish. Overall I am extremely Pleased , and I get why Kef is so highly regarded in the home theatre space. I haven’t tried too much stereo music, but so far very happy with the sound.
Again, sound stage is very good. And music seems very neutral without a ton of colour. I feel like my older speakers were a bit warmer sounding, but these are just as pleasant to listen to.
My purchase is unopened as I had to invest in a new amp recommended to give the speakers a chance to give you what keg intended. Here enters the Cambridge cx Ca 61 and QED cables even though I have meters of good cable( again to do justice to the speakers).
Then enters the preamp because watching a review I found to my dismay it has no phono as Cambridge believe ( according to this reviewer ) that if you can afford this amp you can afford the preamp. Wow, I had two amplifiers and wanted to play my unplayed records of 20 years.
In truth, I gave good pairs of speakers to charity and so far everything I have purchased is unopened and probably stay that way as the joy had gone- The first thing I asked was could have a demo at which point I could know what I need but you didn’t have any Q550s to let me hear.
That day was my judgment day as I am not blessed with a ton of cash and as a pensioner who wanted to let my ears take me back to a lifetime of memories via my music- So if I had left that day without purchasing I probably wouldn’t have returned as it’s extravagant.
The sales people was great and no fault is attached to them for my let down however, enabling me a demo would have changed a lot. Your advertising brags about demos that answers all your questions but !!!.
Upgrading from an outstanding passive Boston Acoustics soundbar to these, paired with the Q250c center channel speaker, powered by the Pioneer VSX-LX 505. So far, for movies I’ve been very impressed, great stage presence and separation.
For music I’m still playing with the set up, going from small to large on the receiver and while I can tell the difference, the problem is that I like’em both, small w/ sub and large without, they’re that good! If you research these speakers, you know the only complaints about them are the rigger feet (yes, it is true, they’re ugly!) and the lack of accessories that should be included with them (i.
e rubber feet for tile & wood floors and the magnetic grills). Just wrong that KEF is nickel & diming customers. Wish I could give them a half star for this. But sound wise they’re great. Want to also try the Wharfedale Diamond 12’s, so I might do that, given Best Buy 60 day return policy.
As one of the worlds thinnest high performance home theater speakers, the new T301 satellite combines several landmark innovative driver technologies incorporated into cabinets only 35mm thin. With KEFs new T Series speakers, you get exceptionally slim profile speakers that generate all the intricacy, spaciousness and dynamic range of a high end conventional design.
The T301 satellite pack is powerful enough to fill most normal rooms with a compellingly detailed 3D sound image. As easy to set up as they are on the eye, they make the perfect entry level surround sound system for the latest generation of flat screen TVs.
A special wall mount bracket (included) has been designed for ease of installation without adding any more depth to the speaker itself. T301 Satellite Speakers Feature: Ultra-slim bass driver offering clean, forceful response that brings the action vividly to life, New large vented tweeter provides warm, natural sound thats so real you feel youre there, Can be mounted on the wall or on the included desk stand, wall bracket also included.
Optional Floorstands sold separately, contain extra crossover components that tell the speaker its operating in free space and adjusts output by +3db.
I have done alot of research on these products, and wanted something sleek, slimline and sophisticated. I couldn’t afford the full in wall set up so set my heart on these kef units. I already purchased a Samsung q90r from richer sounds few years back, but never quite felt the ambience of a proper cinema effect.
Spoke to Marc at Southampton. He sorted it. Matched the online price deal I found and went the extra mile. There has been a few hiccups with supply, as funnily enough the world stopped working for a while.
Marc was on the ball and kept me in the loop all the way. Credit to the team. Recommended, buy from the boys who know there stuff.
I am really pleased with these speakers. My audiophile knowledge and appreciative skills are modest, but I’m sure these would impress even more discerning users. The build quality is fantastic and they complement a sleek and low profile interior design.
The speakers hit the sweet spot – the fact that you get a pair of them for this price point is great! The speakers are very good quality, too, and produce excellent, crisp sound. They are also a space saver being as thin as they are and still having the great elements internally to produce the sound they do! A must have for home theater buffs on a budget!.
Increase any speaker’s vertical sound capability with this KEF surround speaker. It’s Dolby Atmos-enabled for creating immersive audio during movie nights, and its versatile placement lets you put it on top of a Q Series speaker or mount it on the wall.
This KEF surround speaker produces clean, detailed sound thanks to its Uni-Q driver array. Uni-Q driver array and 1′′ vented aluminum dome tweeter Offer a complete range of sounds. Dolby Atmos enabled speaker Ensures sound is projected in robust, full-bodied detail.
Two-way speaker system Sounds like one source rather than several separate sources. Damped tweeter loading tube Produces a detailed and natural high-frequency sound. Designed to be placed on top of Q Series speakers Wall-mount keyholes for installation are also available.
105Hz – 18. 5kHz frequency response Ensures a wide range of accurately reproduced sound. 86dB sensitivity Lets you enjoy powerful sound. 8 ohms impedance Conducts power through the speaker.
Keep in mind when you add Atmos speakers you only get a little sound out of them until all hell breaks loose on your TV/Home theater. These paired well with my B&W speakers. I had purchased the Klipsh Atmos speakers.
No bueno. All that being said try them and see. Best Atmos solution is ceiling speakers. This is a close second. I also recommend the B&W M-1’s are less money and just as affective.
Recently decided to get these atmos speakers as I had a older KEF Q1s as height. So glad I did, it’s a brilliant addition to the standard 5. 1. I now have a complete package of KEF and it’s a welcoming additional adding those atmos.
It is subtle but definitely an improvement also. As always Richer Sounds have great advice. Thanks as always!.
Enjoy theater sound with this sealed KEF Kube subwoofer. Its 10-inch driver provides midsized rooms with 111dB of full, resonant tones, and the 24-140Hz frequency range keeps the air pulsating with deep bass.
This KEF Kube subwoofer’s built-in Class D amplifier lets you connect directly to mixers and avoid cable clutter.
Very musical sounding sub blends very nicely and easily with my bowers and Wilkins. But there’s one big problem, it only turns on with high volumes. If you’re listening to say 70-73 db volumes which I usually do it shuts off.
Was reading about this on other places and contacted kef customer service as well but they did not have any help with this. Only other option was using the lfe input. But for me, I wanted to use it with speaker level input.
So if you’re listening to over 80db volumes it’s fine but if it’s around 70db or around it’s not gonna work. Another thing is with really higher volumes which we rarely do listen to it gets a bit boomy.
The Kube10 was just what I was looking for to discretely blend into a medium sized room and provide an accurate, clean bottom end to my surround sound. One caveat! A STRONG receiver subwoofer signal is required to activate the KEF plate amplifier.
Because the Yamaha Aventage AV receivers have a lower than average subwoofer output signal, it often only activates the Kube amp at very high volume (-10 db) playback. Then, once the volume is turned down to a normal -30 db, the KEF eventually returns to Standby unless it occasionally sees another signal strong enough to exceed its activation threshold.
My other subwoofer has exactly the same problem, EXCEPT that because it has an Off/Standby/On switch, it can be set to work perfectly by flipping the switch to ON for low volume sources. After hours of frustration trying to resolve the issue, I found myself wishing KEF had the same On switch.
The KEF auto-activation design is elegant, but when dealing with weak input sources coming through the Yamaha, an On switch would have saved a lot of time. Both KEF and Yamaha support sites stubbornly deny that this problem exits, so it took a $100 service call to learn from the technician in the first 60 seconds, that the KEF activation problem happens all the time with Yamaha Aventage receivers.
The best work around is to defeat the subwoofer level setting suggested by the excellent Yamaha Parametric room Acoustic Optimizer. Manually setting the subwoofer level to +10 db and turning down the volume knob on the KEF amplifier works for all but the lowest volume inputs.
The KEF still won’t activate to fill in the lower end on less complete sound sources such as a streaming service (Rock or Classical) playing at a conversational volume. However, with the subwoofer +10 db boost, fills in wonderfully on well mixed movie sound tracks and music sources.
The Kube is a great subwoofer, but consider your tolerance for frustration if you want a use it with a Yamaha receiver. Don’t expect much help from either company on issues concerning this interaction, it’s do-it-yourself all the way.
I’m just greedy I guess. I have an excellent set of kef speakers for my home cinema system in a 7. 1. 2 configuration. It sounds very good. When I saw the cube 8b for sale though I figured, why not? You can’t have too much bass right? Right.
You can’t! I slotted it into the rear of the room, took a while to configure it, with Patrick’s help from the Stockport store, and am now going back through my movie collection to listen to the extra bass.
It’s just filled a gap I didn’t even know was there. 2 subs are better than one.
The S2 Floor Stand’s five colours perfectly match the finishes of the LS50 Meta and the LS50 Wireless II wireless speaker system. Available in Carbon Black, Titanium Grey, and Mineral White, plus Royal Blue Special Edition (LS50 Meta) and Crimson Red Special Edition (LS50 Wireless II).
Metal floor protector discs are included to protect hardwood and tile flooring. S2 Floorstand features mounting holes for securing your speakers. The S2 Floor Stands are designed by our UK engineering team to ensure your speakers sound their best, and deliver pristine, room-filling sound.
They are the ideal height for driver positioning, and their steel plates and fillable aluminium tube structure provide the perfect platform.
I’d been thinking about buying a turntable, amp and speakers for a good few years. While I knew the turntable I wanted I was less sure about the speakers. What Hi-Fi put me on the right tracks, firstly with price guidance across the three components, then with a recommendation of the KEF LS Meta speakers, with optional floorstands.
The resulting set up is fantastic. That moment of placing the stylus on a record for the first time in around 40 years and the sound from the speakers was one of pure joy! CDs are great but vinyl is a totally different experience and the speakers sitting on their stands look great and sound fantastic.
Not cheap but nicely machined and (for me) an attractive match for the KEF LS50. The box is surprisingly small. Assembly is largely straightforward although I confess I did puzzle over the set screws (used for the leveling spikes); I found the (largely wordless) instruction opaque on this (where do these extremely tiny screws go?).
I will eventually add some sort of filler (sand or something); I haven’t yet decided exactly what I will do in this regard. The web is full of opinions, as usual.
KF92 is a compact, room-friendly subwoofer engineered to deepen every listening experience. Two massive 9-inch drivers in a force-canceling configuration are powered by an immense 1000 Watts (RMS) of power.
Optimized with KEF’s Music Integrity Engine, KF92 delivers astonishing levels of deep and controlled bass.
Clear disclosure, I am am audio engineer ny trade and hace been in audio engineering and then aalea for over 40 years. I have always owned 2 way bookshelf speakers as that is the type of speaker I was used to listening to professionally.
I have always loved KEF speakers and despite alreasy owning 5 pairs of 2 way bookshelve speakers, i was moment away from ordering a pair of passive LS50s. Then I stopped when I realized I’d new new stands.
I had always been intrigued by the 3-way R3. I auditioned them and decided that they sounded good enouth in the sound room to try them out on my rig at home. Thry were easy to place in my room. Right out if the box they imaged better than any of my other speakers and when they were broken in they sounded better and more balanced than speakers costing multiples of the R3.
They sounded amazing on my solid state amp/pre and even better on my tube gear. To me perhaos the most important aspect of a speaker is its ability to throw a soundstage and these do better than most even compared to the Sonus Faber Electa Amator which 4X the price.
Yeah, I’m spoiled now. Usually I’ll have a pair up for 4-6 montha then get bored and swap them with a different pair. I hade had the R3s up for over a year and I have no interest in moving them. Well, if i get a good price on all other speakers, i could be convinced to get the Reference 1s.
Seriously, for my trained ears, these are the best speakers under $5K. (Want a treat? Listen to Roger Waters’ “Amused to Death” in Q-Sound on your speakers then ok the R3s. Do that and you will get rid of what you are listening to now.
These were not at all what I was expecting. They’re a great speaker, but I didn’t like them so I took them back. Fit and finish was great, nicely packaged, nice binging posts (note you have to take the lug completely off to remove the plastic plugs to use bananas).
They a sort of a bright, detail focused speaker. Timbre and tone is great through the low mids on up. I had trouble getting good pitch definition from the bass no matter how they were placed or if the port plugs were in.
I ran mine with a Yamaha as2200, which is a great amp, but perhaps these would do better with something class D or just higher power. If you’re into micro dynamics and a foreword, analytical sound, you may very well like these speakers.
With my amp they weren’t punchy enough. Oh, let me add that these image outstandingly well. Not the biggest soundstage, but instrument placement and a strong phantom center are easily achieved without messing too much with placement.
I’d recommended them at the sale price of 1700 or so provided you like a certain sound, but 2200 is a stretch. I think these really need a sub to shine. And, while a sub might add extension, I’m not sure if a sub would fill in for the punch these speakers are missing in the frequencies they do cover.
Luckily, exchanging them was super easy and I’ll try something else.
Believe the hype around these and grab them before they’re gone. In this kind of price point, they’re competing with some pretty confident competition like Dynaudio Evoke 50, Totem Forest Signature, Spendor A7, and Focal Aria 926/936.
The build quality is outstanding. The sound quality is both crisp and warm at the same time, making them effortless to listen to. The sound stage is very good and bring new life to lively stuff with some fun and energy.
Acoustic tracks sound sublime and intimate, and rock and EDM feel like you’re at a live event. This is just using a Yamaha receiver with 110 watts and poor bass control, I can’t wait to find out how good they are off my NAD 180 watt per channel integrated amp! If I could have afforded them I might have got the R11 for the real dedicated low-end drivers but the bass is very substantial with the R7.
If a crazy deal came along for a pair of compact sealed 10″ subs then I might splurge to get that little bit more control on whatever’s below 100 Hz, but totally not essential. Grab these before they’re gone, especially if on sale or clearance, because you know KEF’s next model is going to be more expensive with marginal gains over what these can do.
Audiolab 6000A Amplifier and KEF LS50 Meta Speaker Package consists of an integrated amplifier and a pair of compact bookshelf speakers. Audiolab 6000A Audiolab’s 6000A is a flexible integrated amplifier designed to meet all the requirements of the modern Hi-Fi system.
It is truly versatile, equipped with both digital and analogue inputs, a phono stage to eliminate the need of an external phono pre-amp, headphone amp and built-in Bluetooth so you can stream wirelessly from your phone and tablet.
Find out more information on the Audiolab 6000a amp here. KEF LS50 Meta Speakers KEF’s LS50 Meta Speaker pair are high precision, powerful loudspeakers built on KEF’s innovative and successful acoustic technology.
Based around the 12th Generation of Uni-Q driver array design and Metamaterial Absorption Technology, the solid stand-mount loudspeakers produce detailed and clear audio to fill your room. Find out more information on the KEF LS50 Meta Speakers here.
I tested the Rotel Tribute combo(amp&CD) vs Audiolab 6000 (amp&CD) combo. No doubt the Audiolab wins in terms of sound, I don’t know all the fancy words to use in this comparison but in my simple language explanation its like this.
The Audiolab sound is thicker fuller darker and most of all it has a 3D like feeling to the sound, by the Rotel it seams like the sound is flat on the wall in front of me, by the Audiolab the sound is away from the wall there is air between the instrument and the wall, so its more real experience.
The bass is interesting because by the Rotel I can hear a bigger bass, but its nice in the beginning, later I felt its blocking some sound of the other instruments, in other words, its not as balanced the bass with the other sounds.
By Audiolab the bass is not sticking out from the rest and I think its more tighter. so its either because the bass is not so boomy or because all the other sounds are punching out same strong as the bass.
Anyway, its more pleasing to listen to because of that. from the other hand the Rotel has also a very special sound very detailed, another benefit it has tone controls(and a general sound booster), you can adjust the bass and the treble which makes it very convenient and takes away the problem mentioned above because u can boost the treble and or lower the bass.
Still it doesn’t give the 3D sound as the Audiolab. one more pro to the Audiolab CDT, you can make fast fwd the song by pressing long the go to next song button, you can NOT do it by the Rotel CD player, only with the Remote controller(very embarrassing).
From the other hand a con to the Audiolab CDT, when you press the pause button, if you leave it more than a few minutes it goes back to beginning of the CD (I didn’t find any setting to change that – very embarrassing).
Way back in the day when I was a richer man (no pun intended) I had a cracking hifi system centred round a Pink Triangle/Audi Technica turntable/arm setup coupled with Linn speakers. My amp at the time was the original Audiolab 6000A.
Sadly in later, more impecunious times it all had to go. but having experienced decent sound I was never going to be satisfied with an iPod docking station so my goal was always to get back to a quality separates system.
So with my recent purchase of the new Audiolab 6000A, I’m definitely getting there. Granted, my vinyl collection too is long gone and my primary source of music is now lossless streaming, which compared to the PT/AT combo is, with the best will in the world, a compromise – but the 6000A is up to the job and loves my Fyne Audio F302s and for the money I can’t think of an amp I’d rather have.
It’s noticeably more impressive than the budget NAD that previously powered the F302s, the sound is punchy when I need it to be (think Boy Harsher’s ‘Pain’ or my go to bass demonstration track ‘Bad Guy’) and delicate as a spring flower for the likes of Mississippi John Hurt or Minnie Ripperton.
I also enjoy audiobooks too now and the spoken word is clear and natural sounding at normal volumes – I prefer my narrators not to be shouting at me 🙂 So in short, I could not be happier with my new Audiolab 6000A and of course the option is always there to add a power amp for that mythical time somewhere in the future when I add an Linn LP12 and upgrade my speakers.
I would not hesitate to recommend this piece of equipment.
I’ve had this for around a year now, and it was great as a standalone integrated amp, but has easily kept up with system upgrades – first from Q acoustics 3020i to Quad S2 speakers. Then I added an external power amp, the XTZ A2-300 (which doesn’t change the sound signature, but adds some weight and authority), and very recently, an Earmen Tradutto DAC.
I’ve also upgraded my speaker cables to Tellurium Q blue II and my interconnects to Chord C-line, and nowhere along the journey has the 6000A failed to do justice to my improvements. It really is a first-class amp and you’d have to pay appreciably more to do better.
It’s so very detailed, handling frequencies across the sound spectrum with great ease and balance, helping to produce a fine sound stage with good voice and instrument tonalities and airy separation.
All in all, it’s astonishing value even at the present price of £649 (I paid £599 for mine) and I can thoroughly recommend it as a complete no-brainer. Right now, I feel my system is as good at it’s ever likely to be.
I suspect I couldn’t better it unless I were prepared to spend at least twice as much, which I know I’m not.
The DTA100-LF is a stylish desktop amplifier designed by Dayton Audio specifically for low-frequency application. This low profile amplifier features an ultra-stable DC power supply and optimally designed Class-D circuit topology to give you 100 watts at 4 ohms.
Use the three built-in filters to optimize the output and power your drivers to their full capability. After dialing in your tone, the DTA-100LF even manages its own power state with the auto-on feature to function as a true set-and-forget unit!.
Solid build quality. Feels better in the hand than it looks in the pictures. Maybe a bit larger than I had expected, but not really large at all. The crossover is very steep (compared to moving from an Dayton APA150 set up as a sub amp), so I had some difficulty getting it to blend with my mains.
Am surprisingly able to use the single band EQ well above the crossover frequency to help with a bit of midbass lull my mains have in their current positions. Actual output may be a bit low compared to expectation.
I’m running full range stereo through my unit, so input voltage should be maxed out for my rig. Its not that there isn’t enough headroom to blow out the ceiling of my basement office setting, but the level on this has to run at least 1 o’clock to match up to what I was getting around 8 o’clock on the APA150.
Sound is clean and clear, as good or better than the APA150 (which is Class A/B). No artifacting, no analog noise. Plenty of punch and speed. Quality unit at a good price. Easy to live with. May not be a good match for particularly insensitive subs and/or large rooms.
My unit is either defective or the published specs of 100 watts at 4ohms are purely fictional. When compared side by side to my Yung SD100 100 watt (no-boost at 4ohms) plate amp it is laughable. Max gain on the DTA-100LF “with” max EQ boost at 45hz still gets me less output than the Yung at 35-40% gain.
Turn off the EQ boost and it is even worse. I really don’t think it is defective because it does work. All of the controls appear to do exactly what they are supposed to do. It just has negligible output when compared to an amp with the same output rating.
———————————————– (Additional notes from the cusotmer 6-30-2022) This is an addition to my review (Marc S. ) from earlier. It appears that the “Gain” issue with the DTA100 I have is because of my source only having a 1 volt output.
The amp works great with any other source than the one I actually bought it for.
I had the same issues as a couple other reviewers who noted low input sensitivity. Compared to a couple plate amps with similar input sensitivities, and going into a 4 ohm load, it was lower. The manual notes that if you’re running off a channel with its own low pass filter, to set the low pass on this unit all the way up.
It also notes that you *should* use both inputs, but *can* use just the left, for mono inputs. I’m coming off LFE and after upping the low pass and splitting the input so it went to both channels, the sensitivity was more in line with my other amps.
I have very sensitive mains, and not-so-much the subs this is feeding right now, so I think it may just be a fine line for some system setups. Beyond that, the build quality is great, smooth pots, and no noise.
Item model number: Parasound 2125v2. Parasound’s NewClassic Model 2125 power amplifier just received an update. It’s been reborn as the NewClassic Model 2125 v. 2. Its winning combination of power, features, build quality, and affordability make it a must-have for all but the most demanding systems.
Just replaced my front L & R amp with this and the improvement in quality is noticeable. The old front channel amp was an Onkyo M-5000. I’m Using this with a Parasound 7100 controller and a new classic 5125 for my home theater.
I like that the amp has a loop out but I haven’t tried it out yet. Thinking about looping the Onkyo to power some outdoor speakers. I have the B channel going to an un-amplified switch that easily powers four sets of stereo speakers throughout the house.
Very happy overall with the whole setup, would recommend to anyone looking to replace their home theater with separates or those just wanting separate amp for their stereo.
I really like Parasound products. Very solid construction, they’re very reliable and sonically very good for the money. One thing that I found with the model 275 to pass along: the 12v trigger wire uses a 2.
5mm mini-plug. If you buy one sans the wire, it can be extremely difficult to source a new one. The 2. 5mm plug is very uncommon.
I have always been a big Parasound fan/consumer. I wanted to add some power to some new 4 ohm speakers that I bought and to my home theater system in general. The Parasound 5250 seemed to fit the bill as I have always liked the concept of separate monoblock amps.
The 5250 is one amp but inside are 5 separate amps with 250 watts of power for all channels to 8 ohms and 385 watts of power for all channels to 4 ohms. The sound both for movies and music is awesome.
I am truly delighted with my new/used upgraded home theater system.
LSX II delivers room-filling, natural, accurate sound from any source thanks to the knowledge and experience of KEFs talented engineers and the iconic Uni-Q driver array. Plus it has a contemporary design courtesy of famed industrial designer Michael Young, and is available in a choice of five stylish finishes.
A couple family members chipped in and gave me the money for some kef lsx that I had recommended to my father in law and loved them myself. The rumours were circulating that a new version was soon to be released so I held off.
Even when they came out I wanted to see if it was worth the extra money over the originals so waited for the reviews etc. I phoned Richer Soumds in Newcastle and arranged a comparison with the Ls50 w2 having already had plenty listening to version 1 and both myself and Eughan were impressed with the improvements and surprised at the closeness in sound quality between the 2 so I kept in budget and plumped for the gold sound wave version.
They are superb for my needs, smallish living room at fairly low volume. The soundstage is phenomenal and the detail they draw from my Tidal subscription is like listening to my favourite albums for the 1st time again.
Vocals are presented forward with instruments all having their own pocket which makes for such a entertaining listen. I honestly don’t see the need for a sub but the option is always there. The app is well presented and Iv come across no glitches as yet.
All I can say is try them, don’t be fooled by the small cabinets because they sound big! I love them and now don’t have that what if I get this amp or that streamer or those cables quandary anymore. Brilliant service and advice.
These speakers are very impressive little powerhouses that have tremendous high fidelity sound. KEF mid and high frequency is hard to beat. A bit weak on the low frequency end but still good for such a small package.
A subwoofer would help here. Love the WiFi capabilities The only issue is the WiFi signal cuts out periodically and I’m not sure if that is a speaker or source issues yet. Must go online to get instructions as none are included.
We got the KEF stands and it makes for a very stylish addition to our listening room. Very happy overall.
Awesome for listening to music!! Originally tried out many different sound bars and music on them just wasn’t the best, but tried out these guys and they’r amazing!! I only recommend them for small-medium sized rooms but they’re awesome, the only complaint I have is sometimes the speaker can rattle depending on how much bass is in the song but tuning everything made it a lot better.
Thinking about pairing it to a subwoofer soon! And you can use any subwoofer not just the kc62. Overrall Strong recommendation from me :).
KEF Q250C Centre Speaker matches centre channels which is why the Q250C is the ideal partner for smaller Q-Series models. It features KEF’s signature Uni-Q driver array and without a rear port, it can be positioned inside a cabinet with ease creating precise and captivating dialogue.
“Sit anywhere” technology At the core is the Uni-Q driver array, KEF’s signature innovation places the tweeter in the acoustic centre of the midrange cone bringing the acoustic pinnacle of a single point source closer than ever to realisation.
The result is a more detailed and accurate three-dimensional sound image which is dispersed more evenly throughout the room than possible with a conventional speaker. Uni-Q’s ultra-wide dispersion is reinforced by KEF’s ‘tangerine’ waveguide over the tweeter dome.
Uni-Q sound The closed box midrange cabinet design lowers the load on the Uni-Q midrange cone improving clarity and detail while producing cleaner, punchier bass. With the Damped tweeter loading tube supplying a gentle termination of sound produced from the back of the tweeter, lower treble performance is drastically enhanced and a new low-distortion inductor on the crossover delivers cleaner bass response.
Redesigned Bass Drivers The LF drivers have a larger roll surround, along with a new spider suspension to produce cleaner bass at high volumes. A new cone structure improves midrange clarity, and an enhanced Auxiliary Bass Radiators (ABRs) with a new surround and rear suspension delivers better controlled and more impressive bass.
Ever since I heard the Altec 604 way back in the ’70s, I knew coaxial speakers had incredible imaging. I have a pair of 604s even now. The KEFs produce even better imaging in that you can be well off-axis and still experience the well-defined sound stage.
That you need ten times the power to drive the KEFs to comparable levels is not a problem given the available power from today’s amps. The perceived frequency response of the Q150 is very smooth. The mids sound slightly veiled to me, but I have been listening to horn speakers.
The KEFs are probably more accurate. There is no “listener fatigue” that I experience with many speakers. I can listen to the KEFs for hours and they still sound great. I can’t comment on how low the Q150s reach as I’m only using them with a subwoofer.
In this configuration they are probably a better choice than the next level up Q350. The smaller diameter woofer in the Q150 should yield better dispersion and smoother transition to the tweeter. If I were using them without a subwoofer, I would go for a larger model.
As others have noted, I would not have been as eager to get the Q150s had they not been on sale at half-price.
I bought these for listening to music and for the TV sound when watching movies; these KEF speakers have very good sound and the bass is much stronger than I would have expected for a smaller size bookshelf speaker.
I have them installed on a recessed shelf below the TV and the bass is strong enough that you can feel it in the floor structure; I was originally planning on adding a subwoofer to my system, but that may not be necessary now.
When watching movings, the sound is much clearer than my previous Yamaha speakers. When playing CD’s or streaming music the fidelity is much improved over my old speakers as well. I took off one star from the rating because the walnut veneer laminate had a number of raw edges that I had to carefully color with a brown marker to make them blend in with the rest of the cabinet; KEF’s quality control should have caught that in the factory.
Definitely worth the sale price, although the regular price does seem a bit steep.
As most consumers do, I spent a great deal of time reading reviews about these and other bookshelf speakers. The true audiophiles who conduct multiple tests, have had some negative things to say about these speakers.
I am not an audiophile and so I decided the only way to judge the speakers was to listen to them in store. I did and was impressed. This pair is a slight upgrade from the previous Polk speakers I owned and so far, the sound quality is discernibly better overall.
Judge these speakers by listening to them and then consider what kind of environment they are suited for. In my space, they work extremely well. I would likely not have paid the MSRP for this set, but have no regrets about the purchase based on the sale price.
The KEF set that is extremely well reviewed is much more expensive. The price and quality of this set, meets my needs.
Q Acoustics 3030i Speaker is the second bookshelf model in the 3000i range, sitting between the 3020i and 3050i. It offers double the internal volume of the 3020i and uses large powerful woofers despite its compact dimensions.
Attractive Looks Elegance oozes from these speakers effortlessly. The attractive 3030i speakers have a sleek design that comes in a choice of three colours. Choose from white, grey, black or walnut and pair them with an optional matching stand for a smart speaker set up in your listening room.
Compact Speaker Design Slightly larger than the 3020i, the 3030i is a standmount bookshelf speaker that can deliver an excellent performance and is created with accessibility in mind. It’s compact design means this speaker is easy to home as it takes up little space.
It offers amazing sound parallel to that of a floorstander but without the need for a subwoofer. The woofer enables bass performance as low as 46Hz, which much lower than many stand mount speakers. The 3030i take inspiration for the tweeter and mounting design from the 3050i loudspeaker, ensuring plenty of clarity and punch.
Had these a couple of weeks now. Really pleased with them. I’ve tried the monitor audio bronze 100’s but these just sound more pleasant overall. The low bass is ever so slightly muddier but they buck the current trend for really bright treble that seems to overpower my ears.
They are on the warm side which I love. I found the monitor audios tiring after a while and just a bit empty sounding in the mid range. They look fantastic for cheaper speakers as well which went down well with the wife.
Thanks to everybody at RS cheltenham. Really patient, friendly and knowledgeable.
From the moment I opened the box I knew I had a quality product. I have purchased HiFi equipment for over 50years now and I know quality when I see and hear It. These speakers are produced to a high standard, like the Q Acoustic speakers I have bought in the past.
My go to album for initial sounding is Steely Dan Aja. It takes a lot to impress me and for the price you always wonder where they made the cost cuts. From the first track, on vinyl the sound was very impressive, clear and direct throughout the frequency range.
I just could not stop playing music of all types and all formats and the sound put a big smile on my face. For the price these speakers are remarkable and as good as some much more expensive units. These are quite new to the marketplace but if you want an excellent sound from a bookshelf speaker then give these a try.
Well done Q Acoustics you’ve managed to give value for money.
I purchased these speakers in January on the recommendation of Mac at Preston branch. They have replaced a pair I happily used for nearly 40 years with a Rotel amplifier. I use them mainly for classical music with my cd player and the sound quality is exceptional.
I am delighted with my purchase and most satisfied with the advice and service I received from Richer Sounds.
Sacrificing sound quality when you’re on the go is a thing of the past with the SHA900 Portable Listening Amplifier. Use it with your mobile device to enhance the experience of your favorite earphones and headphones.
This headphone amp is one of the coolest things I’ve ever purchased! I use it with shure srh1540 headphones. This amp made them sound so much better when playing music through my phone. The eq is probably my favorite part.
I can color my sound just the way I want. I love the simplicity of this amp. And the quality audio and build speaks for itself. This is perfect for anyone who values great audio from their headphones.
Pros: Everything Cons: Nothing The Shure sha900 is by far the best Amp/Dac i have ever had the pleasure to purchase the sound quality with my se846’s and silver dragon cable is a pure delight for your ears!.
stunning clarity depth and soundstage even with my ipod classic 5. 5 gen they have taken the ipod to another stratosphere i recently had a astell & kern ak240 used with my se846 and seriously no bull this set up has wiped the floor with it!!.
honestly! If you have the shure se846 (with silver dragons or the shure stock cable) you have to have the sha900 its a matter of life and death!!.
Upgrade your sound system with this MartinLogan Motion 50XTi center channel speaker. Two 6. 5-inch aluminum cone woofers deliver clear, resounding bass, and the Folded Motion XT tweeter produces detailed high and mid-range tones.
This MartinLogan Motion 50XTi center channel speaker has a rear-firing port that helps enhance bass response for a more dynamic sound.
These speakers sound fantastic. My wife and I tested the B&W 603 and 704 S2s along with these and the ML motion 40is sounded so good. For the price compared to the 704s, it wasn’t worth spending the extra money.
They are so clear and open! We also got these on sale so we were even happier to get great sound at a great price. These replaced B&W 683s2s. Coming from B&W, these MLs are power hungry since they are 4ohm speakers so be sure you can power them up.
With power, you won’t be disappointed. I’m using an Outlaw Audio 5000 amp paired with a Denon 3600x. They are about 100 inches apart with a slight toe in. For my front stage, I also changed out my center with the ML 50Xti.
my front stage is even better now. I then added in the surround motion fx and my sound bubble is amazing. Looking forward to watching and hearing all the movies coming out!.
I bought these ML 40i speakers as replacements for my Klipsch RF3s two-way speakers. My receiver is the new Yamaha RX A4A (110 w/ch, 2-channel driven into 8 ohms). The Martin Logans are 4 ohms. Right out of the box, and hooked up, it was apparent these things want power.
My Klipschs are very sensitive at 98 db. The ML are 92db. So make sure you have a good amp to drive these things. The low end is not that strong. Not sure if it’s a shortcoming of my amp. I have them bi-wired with Monster cables.
I added an SVS SB-1000 Pro sub to help the low frequency. That is why I only gave 4 stars. Overall, the ML 40i speakers revealed things in the music I had never heard with the Klipsch. The high end is crisp and clean.
One more thing, the piano black finish looks great in my room.
They speakers are amazing. I have spent a lot of time in the magnolia room testing all kinds of bookshelf speakers. It was between these the kef q350s and the bowers and wilkins 606 S2. These by far have the best overall sound stage.
The bowers and kefs have little to no mids compared to these. And with a rel tzero mark3 sub it sounds amazing. I use them for vinyl and cd listening as well as streaming from my tv. The mid range on these speakers beat everything out of the wayer and the folded tweeter adds crisp highs without being to harsh which i ran into with the bowers bookshelfs.
Conceived from the start solely for flush-mounting applications, the all-new Ci Series features KEF’s revolutionary Uni-Q technology, which is renowned for creating a superbly defined sound stage over a far wider area than any conventional speaker.
Apart from greater listening pleasure, this gives you exceptional flexibility of location. Whereas the narrow ‘sweet spot’ of lesser systems so often conflicts with the structural or aesthetic requirements of the room, Ci Series loudspeakers with Uni-Q drivers deliver consistently excellent sound quality virtually irrespective of where they are mounted, so you can be sure of acoustic integrity even with the most problematic installations.
Where the ultimate in sound quality is not critical, the Ci models featuring dual cone drivers offer a more affordable and less complex alternative. With fourth generation Uni-Q coincident-source drivers, Ci 160QS and QR models provide a superbly defined stereo image over such a wide area as to give the designer real flexibility of positioning in the most problematic installations.
The pivoting tweeters of some competitors’ products don’t even come close to matching Uni-Q performance.
Best speakers I’ve owned for sure. I have four of these in my basement home theater setup and they sound incredible. The detail and range are quite dramatic. This is my first serious home theater build and I’m so excited to finally have this kind of quality in my own setup.
Enjoy superior sound in an unobtrusive low-profile format with this KEF round speaker. Patented Uni-Q technology delivers high quality sound evenly through your room, and the marine-grade construction lets you install this component in bathrooms or boats or near the pool.
This 8-inch KEF round speaker resists UV damage for long-lasting performance. Handles up to 125W of input power Offers robust and controlled audio that is crisp and clear. 8′′ UNI-Q driver and 0. 6′′ aluminum dome tweeter Deliver a complete range of sounds.
Marine-grade construction Protects the speaker from moisture and UV light. Magnetic assembly Grilles are retained by a powerful magnetic circuit for installation in seconds. In-ceiling mounting Allows sound to disperse more evenly throughout the room.
9. 45′′ mounting cutout diameter Mounting depth is 3. 83′′. 45Hz – 20kHz frequency response Offers accurate tonal representation. 90dB sensitivity Ensures crisp, robust audio. 8 ohms nominal impedance Provides efficient conduction of power through the speaker.
After doing some research and listening to some music, we’ve come to the conclusion that the amp for the KEF LS50 Meta is a great choice. It has a lot of features that are perfect for the KEF LS50 Meta, and it sounds great.
Adhesive for metal to wood is a material that helps to bond metal to wood. This can be done by using a variety of methods, including using screws, nails, or even welding. Adhesive for metal to wood can be found at most hardware stores, and is typically used in construction projects. 20 Best Adhesive For…
Brush on paint for plastic is a type of paint that is specifically designed to adhere to plastic surfaces. It is often used on toys, household items, and other objects that are made of plastic. 20 Best Brush On Paint For Plastic 1. Rustoleum Multi-Purpose Gloss Brush-On Paint, Kona Brown – 1 qt canister Use…
Apple Watch Faces for fitness is a feature that allows you to see your current fitness activity and goal at a glance. It also provides you with motivation to stay active by tracking your progress and showing your current heart rate, steps taken, and calories burned. 20 Best Apple Watch Faces For Fitness 1. Apple…
A hammer drill is a tool that is used to drill holes into hard surfaces. It is also used to remove tiles from floors and walls. The drill has a rotating drill bit that is held in place by a chuck. The drill bit is made of a hard material such as steel or carbide….
Indica edible strains for sleep are typically high in cannabidiol (CBD) and low in tetrahydrocannabinol (THC). CBD is a non-intoxicating compound that has been shown to promote sleep and reduce anxiety, while THC is the psychoactive component of cannabis that can promote wakefulness. Indica edibles may also contain terpenes, which are aromatic compounds that can…
As the best book on investing in the stock market will vary depending on your level of experience and investment goals. However, some popular titles that may be worth considering include “The Intelligent Investor” by Benjamin Graham, “The Essays of Warren Buffett” by Lawrence Cunningham, and “One Up On Wall Street” by Peter Lynch. 13…