20 Best Adjustable Control Arms For Jk (2022 Updated)

Improves Traction – Allows For Greater Articulation Front And Rear Control Arm Kit Designed For Jeeps With A 3+” Suspension Lift On-Car Single Adjustable Tubular Steel Construction Improves Articulation.

Improve the articulation of your JK with a Mammoth 4×4 Adjustable Control Arm Kit. Designed for 3 plus inches of suspension lift, this complete kit includes 8 rugged control arms that are equipped with Heim Joints to maximize articulation.

This Mammoth 4×4 Control Arm Kit was designed with the adventurous enthusiast in mind. – Single On-Car Adjustable. Unlike some other aftermarket control arm kits that are fixed, Mammoth 4×4 Control Arms are single on-car adjustable.

This allows you to precisely dial in your suspension settings, specific for your lift/application, to ensure you stay safely on the road or the trail. – Durable Construction. Mammoth 4×4 manufactures their Controls Arms from heavy duty steel tubing for superior strength and rigidity.

The Arms are completed in a black powder coated finish for durability and long lasting corrosion resistance. Mammoth 4×4’s Control Arms come complete with zinc coated heim joints that are greasable to eliminate binding.

– Bolt-on Design. Mammoth 4×4 engineered their Adjustable Control Arms to be a direct bolt-on replacement for the stock arms. Installation can normally be completed in about 5 hours time with just basic hand tools.

The Arms will need to be adjusted to the proper pinion angle for your specific lift. Please note that an alignment is highly recommended after installation. – Application. This set of eight Mammoth 4×4 Adjustable Front and Rear Control Arms are designed for use on 2007-2018 Wrangler JK models.

The Rubicon Express Super-Flex Adjustable Control Arms have been fabricated from high-grade steel, and feature the Rubicon Express Serviceable Superflex Joints on one end, and a rubber bushing on the other end.

These are great replacements over worn or damaged OEM units, The user can adjust these to achieve proper suspension and alignment levels. These are Rear upper control arms, and they will be sold as a pair.

Upgrade your vehicle performance and reliability with JKS J-Flex control arms. CNC-bent from stout DOM tubing, the fully adjustable design allows you to fine-tune suspension geometry. The ends are also fully rebuildable and greaseable.

With heavy duty threads and hex shaped weld-in bungs, tightening of the included jam nuts is super easy and secure.

Thinking about upgrading the suspension on your favorite Jeep for better wheel articulation Don’t compromise anything when it comes to a serious part like control arms. Installing Rubicon Express Control Arms will improve your lifted Jeep’s wheel articulation and ride quality without renouncing durability or load capacity.

A group of highly experienced off-roaders laid the foundation for Rubicon Express back in 1996 to engineer the finest high performance suspension and drivetrain parts specifically for Jeeps. In fact, all Rubicon Express employees are Jeep owners that are dedicated to creating the best performing Jeep parts possible.

All Rubicon Express products are meticulously tested on the super tough and demanding Rubicon Trail to ensure that every part this company makes will get you there and back without drama. You can clearly see the pride in workmanship in each and every Rubicon Express off-road performance part.

Improves ride quality and wheel articulation without renouncing durability Every control arm is specifically created for its place with its own part number and is sold individually Able to conquer the world’s toughest trails with its high-strength steel design Engineered to produce proper driveline geometry, better handling and ride quality for lifted Jeeps Does not reduce load capacity Serviceable Super-Flex spherical ball joints for better wheel articulation and increased durability Versions available for several Jeep generations Color powdercoated silver.

TeraFlex JK: Alpine IR Control Arms provide complete alignment adjustability for maximum performance on JK Wrangler/Unlimited models with 2-4” lifts. Uses factory control arm brackets. Includes our innovative IR (Independent Rotation) Bushings.

Can be added to any existing suspension lift.

TeraFlex JK: Alpine Short Control Arms provide complete alignment adjustability and dependability for maximum performance on JK Wrangler/Unlimited models with 2-4″ lifts. Bolts to the factory control arm mounting brackets.

Can be added to any existing suspension lift. High-quality, dependable, maintenance-free, factory-style bushings provide excellent NVH damping and ride quality.

TeraFlex JK: Alpine IR Control Arms provide complete alignment adjustability for maximum performance on JK Wrangler/Unlimited models with 2-4” lifts. Uses factory control arm brackets. Includes our innovative IR (Independent Rotation) Bushings.

Can be added to any existing suspension lift.

Superior Off-Road Performance. Set your Jeep up for explosive off-road performance with these Teraflex Alpine IR Long Adjustable Rear Lower Control Arms for 3 to 6-Inch Lift. These control arms have been designed to provide a full range of movement by re-centering the axles in the wheel well for excellent off-road control.

Additionally, these rear lower control arms come with IR bushings for remarkable rotation and flex and superior vibration and noise damping. With these rear lower control arms, you can enjoy a smoother driving experience no matter how uneven the trails may get.

Heavy-Duty Construction. To ensure superb performance on aggressive applications, these Alpine IR Long Adjustable Rear Lower Control Arms for 3 to 6-Inch Lift are built from heavy-duty steel. They have also been completed with a high-quality black e-dipped coating to ensure maximum resistance to corrosion and to enhance the appearance of your Jeep.

Simple Installation. The bolt-on design of these Alpine IR Long Adjustable Rear Lower Control Arms for 3 to 6-Inch Lift allows for simple installation. Please note that these rear lower control arms are designed to be installed with the Alpine IR Long Arm Control Brackets which require cutting during installation.

Application.

Length: 27. 375 inch Max. Length: 28. 875 inch Axle End: 7/16 inch (12mm) Bolt Frame End: 9/16 inch (14mm) Bolt Thread: 1. 25 inch-12 UNF Axle Bushing: P/N 611014 Frame Bushing: P/N 611013 Jk/jku: Alpine Long Flexarm Kit – Front Lower Adjustable Control Arms (3-6 inch Lift) – (P/n 1315500): Tube Diameter and Wall: 2 inch X 0.

197 inch (50mm X 5mm) Factory Length: 22. 625 inch Min. Length: 33. 75 inch Max. Length: 35. 25 inch Both Endds: 9/16 inch (14mm) Bolt Thread: 1. 25 inch-12 UNF Both Bushings: P/N 611011 Jk/jku: Alpine Long Flexarm Kit – Rear Upper Adjustable Control Arms (3-6 inch Lift) – (P/n 1315560): Tube Diameter and Wall: 1.

625 inch X 0. 157 inch (42mm X 4mm) Factory Length: 17. 4375 inch Min. Length: 20 inch Max. Length: 21. 5 inch Both Ends: 9/16 inch (14mm) Bolt Thread: 1. 25 inch-12 UNF Both Bushings: P/N 611012 Jk/jku: Alpine Long Flexarm Kit – Rear Lower Adjustable Control Arms (3-6 inch Lift) – (P/n 1315540): Tube Diameter and Wall: 2 inch X 0.

197 inch (50mm X 5mm) Factory Length: 19. 75 inch Min. Length: 35. 75 inch Max. Fully-adjustable Alpine Long Flexarm adjustable control arms optimize correct caster and pinion angles for a proper alignment as well as re-center the axles in the wheel well to maintain the factory wheelbase for proper suspension movement.

Can be added to an existing suspension lift. These CAD-designed Tera Flex Jk/jku Alpine Long Flexarm Brackets have been engineered for maximum strength.

Front and Rear Control Arm Kit for 2. 5″-4. 0″ Lifted Vehicles (J0041270) by Steinjager. Designed to take the flex out of your vehicle’s suspension, improve steering control and provide better traction, these performance control arms and components are the ultimate suspension upgrade for your high-speed monster.

Engineered for precise alignment and long-lasting life, these exceptionally strong and durable suspension parts can withstand the forces extreme driving while providing the adjustability needed for big tires and other suspension mods.

All Super-Flex Control Arms feature our rebuildable spherical bearing assembly. This assembly features a large 2. 25″ polymer race that encapsulates a 1. 75″ hard plated steel bearing. A threaded steel insert allows adjustable preload and easy maintenance.

The unit is greasable and extremely quiet due to the non-metallic races. This bearing allows extra flex for off-road prowess, yet does not sacrifice on-road handling or long term durability. Two Jeep enthusiasts looking to improve the quality and performance of products available to off roaders founded Rubicon Express in 1996.

Located moments from the Rubicon Trail, Rubicon product are real-world tested to ensure the highest quality, comfort, and safety. Our Goal is to provide Jeep enthusiasts with suspension components of the highest quality and greatest value.

Our staff members are all Jeepers, and will do their best to answer any questions about our products you may have.

Sometimes a lift kit alone just isn’t enough. A 6″ lift might give your truck the stance you want and the ground clearance you need, but it can also drastically alter your truck’s suspension geometry and pinion angles, accelerating wear and tear while also producing an uncomfortable ride.

Teraflex Alpine control arms improve your lifted Jeep’s handling and, on some applications, can restore suspension geometry and pinion angles to near-factory positions, greatly improving your lifted Jeep’s ride quality.

Teraflex offers both long and short control arms, including upper, lower, front and rear units. These Jeep control arms include a black E-DIP coating to prevent rust and forged rod end housings to prevent excessive flex even on the most demanding trails.

Take control of your Jeep. Upgrade your lifted suspension with Teraflex Alpine control arms.

Sometimes a lift kit alone just isn’t enough. A 6″ lift might give your truck the stance you want and the ground clearance you need, but it can also drastically alter your truck’s suspension geometry and pinion angles, accelerating wear and tear while also producing an uncomfortable ride.

Teraflex Alpine control arms improve your lifted Jeep’s handling and, on some applications, can restore suspension geometry and pinion angles to near-factory positions, greatly improving your lifted Jeep’s ride quality.

Teraflex offers both long and short control arms, including upper, lower, front and rear units. These Jeep control arms include a black E-DIP coating to prevent rust and forged rod end housings to prevent excessive flex even on the most demanding trails.

Take control of your Jeep. Upgrade your lifted suspension with Teraflex Alpine control arms.

Add some muscle to your mean machine with Rubicon Express Control Arms. Adjustable control arms are available to fit a range of Wrangler and Cherokee models. Extremely flexible for superior off-road performance without sacrificing on-road handling or durability.

Rebuildable spherical bearing assembly with a 2. 25″ polymer race over a 1. 75″ hard plated steel bearing. Threaded steel insert allows adjustable preload and easy maintenance. Greasable unit provides extremely quiet operation due to the non-metallic races.

Rubicon Control Arms offer adjustable length, tubular construction and a silver powder coat finish.

The TeraFlex Alpine long flexarms blend the maintenance free dependability of our sport flexarms with the complete adjustability of our monster flexarms. The Alpine arms feature high quality, factory style bushings to provide excellent vibration damping rubber bushings at both ends for premium daily driving and ride quality characteristics.

The arms offer full range of movement and have excellent articulation and flex off-road. Premium black e-dipped coating provides superior durability and corrosion resistance. The aluminum pinch collar locks the adjustable joint in position after proper length has been determined.

*These flexarms must be used in conjunction with the TeraFlex Elite LCG Suspension Lift Kit bracketry.

Enhance your Wrangler JK Jeep’s off-road prowess and reliability with JKS J-Flex adjustable rear upper control arms. CNC-bent from stout DOM tubing, the fully adjustable design allows you to fine-tune suspension geometry.

The ends are also fully rebuildable and greaseable. With heavy duty 1-1/4-12 threads and hex shaped weld-in bungs, tightening of the included jam nuts is super easy and secure. At the non-adjustable end, factory style rubber bushings provide quiet, maintenance-free operation.

Arms are powder-coated for a long-lasting finish.

Upgrade your Jeep Wrangler JK’s performance and reliability with JKS J-Flex adjustable rear lower control arms. CNC-bent from stout DOM tubing, the fully adjustable design allows you to fine-tune suspension geometry.

The fully adjustable design allows you to fine-tune arm length. The ends are also fully rebuildable and greaseable. With heavy duty 1-1/4-12 threads and hex shaped weld-in bungs, tightening of the included jam nuts is super easy and secure.

At the non-adjustable end, factory style rubber bushings provide quiet, maintenance-free operation. Arms are powder-coated for a long-lasting finish.

Add some muscle to your mean machine with Rubicon Express Control Arms. Adjustable control arms are available to fit a range of Wrangler and Cherokee models. Extremely flexible for superior off-road performance without sacrificing on-road handling or durability.

Rebuildable spherical bearing assembly with a 2. 25″ polymer race over a 1. 75″ hard plated steel bearing. Threaded steel insert allows adjustable preload and easy maintenance. Greasable unit provides extremely quiet operation due to the non-metallic races.

Rubicon Control Arms offer adjustable length, tubular construction and a silver powder coat finish.

Proper Suspension Alignment. The alignment and geometry of your vehicle’s suspension are often affected when you modify your vehicle’s ride height. With this kit, you can balance and optimize the angles of your vehicle’s front caster, pinion, and rear pinion.

Furthermore, this kit’s control arms feature innovative IR bushings that help reduce your vehicle’s Nvh. This kit’s control arms are built with an adjustable design. This allows greater flexibility in repositioning your new control arms in case you need to modify your Jeep’s ride height.

High-Quality Construction. To hold up to the stress and abuse of your Jeep’s rough terrain drives, this kit’s control arms are manufactured with durable wall DOM tubes. They are also applied with a premium black e-dipped coating to prevent rust and corrosion.

Meanwhile, this kit’s brackets sport a gusseted and reinforced construction for superior toughness and performance. Professional Installation. The installation of this control arm and bracket kit needs to be done by a professional mechanic.

Aside from the long hours of installation, the steps require some cutting and welding of components. Application.

Strong Arm Your Jeep. Suspension is a critical system in your 2007-2018 Jeep Wrangler JK, as it is in any vehicle, as it’s responsible for stability, steering and ride. If you have a control arm bushing or other component fail, it can have serious results.

You can ensure your suspension is as strong as possible when you upgrade to the Omix-ADA Control Arm Kit. Omix-ADA specializes in creating OE replacement parts from more robust materials than the originals for better performance and longevity.

Finished Steel Construction. These control arms are fabricated from the highest quality steel and rubber. Black powder coat finishing protects them from rust, corrosion and other elements from the road or trails.

Direct-Fit Installation. Sold as a kit, these parts are designed to be direct-fit replacements for your existing control arm parts, which means you won’t have trouble with fit. The kit doesn’t come with hardware because your existing hardware can be reused.

You will need to check and adjust alignment after the installation is complete. Application.