Best Toilet Flush Valve Replacement Kit (2024 Update)
If you’re looking for a simple way to upgrade your toilet and improve its performance, a toilet flush valve replacement kit might be just what you need. These kits contain everything you need to replace your old, worn-out flush valve, including a new valve, gasket, and hardware. But before you buy just any kit, there are a few important factors to consider.
First and foremost, you’ll want to make sure that the replacement kit is compatible with your toilet. Different toilets have different dimensions and specifications, so be sure to check the manufacturer’s recommendations before making a purchase. Additionally, you’ll want to consider the quality of the materials used in the kit. A well-made kit will likely last longer and offer better performance than a cheaper, lower-quality kit.
When choosing a toilet flush valve replacement kit, it can also be helpful to read reviews from other customers who have used the product. Look for kits with positive reviews that mention easy installation, improved flushing power, and durability. And don’t forget to consider the price – while you don’t necessarily want to choose the cheapest option, you also don’t need to break the bank on a replacement kit.
Still not sure whether a toilet flush valve replacement kit is the right choice for you? Ask yourself: is your toilet running constantly or not flushing properly? Are you tired of having to jiggle the handle after each use? If you answered yes to either of these questions, a replacement kit could be a simple and cost-effective solution to your toilet woes.
10 Best Toilet Flush Valve Replacement Kit
| # | Product Image | Product Name | Product Notes | Check Price |
|---|---|---|---|---|
|
1
|
 |
The product is ideal for repairing 2-inch flush valve toilets with high performance and easy installation.
|
|
|
|
2
|
 |
The product is ideal for repairing 2-inch flush valve toilets with a high-performance fill flapper.
|
|
|
|
3
|
 |
It is ideal for replacing the water valve in Sealand Marine toilets and F300/F310 models.
|
|
|
|
4
|
 |
This product is ideal for repairing and adjusting the flush valve of a toilet.
|
|
|
|
5
|
 |
It is an ideal kit for repairing and replacing toilet flush valves.
|
|
|
|
6
|
 |
It is ideal for repairing the fill valve and flush valve seal in Mansfield toilets.
|
|
|
|
7
|
 |
This product is ideal for repairing and improving the flushing mechanism of a toilet.
|
|
|
|
8
|
 |
The product is ideal for repairing and replacing toilet fill valves and flush buttons in tanks ranging from 255-305mm in height.
|
|
|
|
9
|
 |
The product is ideal for repairing and upgrading toilet systems to conserve water with dual flush technology.
|
|
|
|
10
|
 |
The product is ideal for repairing toilets with 3-inch flush valves and improving their performance.
|
|
1. Performax 2-Inch Toilet Repair Kit
The Premium Toilet Performance Repair Kit is the perfect solution to replace your outdated and inefficient toilet parts. This all-in-one kit includes a new fill valve, flapper, and handle to help your toilet run like new.
One of the key features of this kit is the universal design of the PerforMAX toilet fill valve. It boasts a 2X greater refill rate and can easily adjust to fit toilets with a tank height of 10-15 inches. This makes it ideal for use in high efficiency toilets that use 1.28 to 1.6 gallons per flush.
The kit also includes the PerforMAX 507AK high performance 2-inch adjustable water-saving toilet flapper. This flapper is designed to eliminate twisting and ghost flushing, which can lead to wasted water. It is also adjustable to maximize water usage with each flush. With this new flapper, you can say goodbye to deteriorating or damaged flush valves.
Installation of the Premium Toilet Performance Repair Kit is a breeze and can be completed in 10 minutes or less. You won't need any special tools or skills to get your toilet flushing like new again.
In addition to improving the performance of your toilet, this repair kit also helps you to effectively control fill and flush volume. With upgraded toilet parts, you can trust that your toilet will be running efficiently for years to come.
Upgrade your toilet with the Premium Toilet Performance Repair Kit and enjoy the benefits of a fully functioning and efficient toilet.
2. Ultimate Toilet Repair Kit – Fluidmaster Performax 402carhrp14
Introducing the premium toilet performance repair kit, specially designed to address common toilet problems such as leaking, running, ghost flushing, and weak flushing. The kit includes a toilet fill valve and flapper, which work together to ensure effective and efficient toilet performance.
The PerforMAX toilet fill valve features a universal design that easily adjusts from 10 – 15 inches, making it ideal for use in 1.6 gallons per flush toilets. This versatile design ensures that the kit can be used with a wide range of toilets, providing a reliable and long-lasting solution to toilet problems.
The PerforMAX 2-inch flapper is made from high-quality, corrosion-resistant Microban material, making it resistant to chlorine and hard water. This ensures that the flapper will not break down or leak due to bacteria, providing a durable and long-lasting solution to toilet problems.
The solid frame flapper is designed to eliminate twisting and ghost flushing, ensuring optimal performance. This feature ensures that the toilet operates quietly and effectively, providing a comfortable and hassle-free experience for users.
The product comes with a 7-year warranty, giving customers peace of mind and ensuring that they can rely on the kit for years to come. With its high-quality design, durable construction, and reliable performance, this toilet repair kit is the perfect solution to common toilet problems.
3. Sealand Marine Toilet Valve Kit – 2 Pack
The water valve kit is a must-have for RV owners who want to ensure that their pedal-flush toilets are functioning properly. The kit includes two pieces of water valves, two pieces of hose clamps, and two pieces of fasteners, making it a convenient replacement option.
Made of durable ABS plastic material, the water valve kit is designed to protect against leaking and is built to last. It is compatible with Sealand marine toilet and fits 300, 310, and 320 series pedal-flush toilets, making it a practical choice for a wide range of users.
Installing the water valve kit is a breeze and requires minimal tools. Simply screw down the valves and ensure that they are properly and securely settled. Removing the kit is just as easy, without any worries about damaging your toilet.
It is important to note that during installation, it is crucial to install the button with the correct angle to prevent breakage. Careful installation is key to ensuring that the water valve kit is settled in a good way.
4. Fluidmaster K-507a-008 Universal 2-Inch Adjustable Toilet Flush Valve Repair Kit With Toilet Tool
Introducing a reliable solution for a leaky toilet tank – the adjustable flush valve repair kit. This product guarantees to restore your toilet's flush performance and prevent water wastage caused by leaks.
The kit is designed with ease of installation in mind, with a universal design that fits well with most 2 in. flush valve toilets. This makes it a versatile option that can be used on various toilet models.
What sets this kit apart is its adjustable flush valve height. With a simple twist, the flush valve height can be adjusted to fit different tank sizes. This feature makes it a convenient option for those who have different types of toilets in their household.
The kit comes complete with a PerforMAX Water-Saving Toilet Flapper. This component effectively saves water usage per flush, making it an eco-friendly option. The toilet tool included in the kit ensures that the installation process is as seamless as possible.
The universal tank-to-bowl gasket system, which is included in the kit, makes it compatible with Kohler, Gerber, and most 2 in. flush valve toilets. This ensures that it is a reliable option that can be used with most toilet brands.
The corrosion-resistant flapper is another added advantage of this kit. It guarantees long-lasting performance and durability, making it a worthy investment. Additionally, the product comes with a 5-year warranty, which is a testament to its quality.
5. Kohler Part 85406 2" Toilet Flush Valve Kit, Colors May Vary
The KOHLER GENUINE PART Flush Valve Assembly is a reliable and high-quality replacement part that is designed to fit Wellworth, Highline, and other KOHLER toilets. This flush valve assembly includes a flush valve, a 2" flapper, a triangle gasket, and bolts, providing everything you need to optimize the flushing performance of your toilet.
This genuine KOHLER part is a perfect fit for those looking to replace their old and worn-out flush valve assembly. The red flapper replaces the old black flush valve, ensuring that your toilet functions at its best. Additionally, this flush valve assembly replaces part number 84246, making it easy to find the right replacement part for your KOHLER toilet.
Whether you're a professional plumber or a DIY enthusiast, the KOHLER GENUINE PART Flush Valve Assembly is a must-have for anyone looking to upgrade their toilet's flushing performance. With its easy-to-install design and reliable performance, this flush valve assembly ensures that your toilet flushes efficiently and effectively.
6. Fluidmaster K-400a-023 Mansfield Toilet Fill Valve And Flush Valve Seal Repair Kit
Looking for a quick and efficient way to repair your Mansfield toilet and eliminate leaks? Look no further than this top-quality toilet repair kit! Specifically designed to fit Mansfield #210 and #211 models, this kit makes it easy to get your toilet back up and running smoothly in no time.
Installation is a breeze with this convenient kit, which includes everything you need to get the job done right. The 400A Universal toilet fill valve, Mansfield specialty flush valve seal, and Mansfield chrome finish tank lever are all included for your convenience.
One standout feature of this toilet repair kit is its easy-to-turn tank water level adjustment dial. With this handy feature, you can easily adjust the water level in your toilet tank to save water and reduce your utility bills.
The EZ-Twist height adjustment feature is another great benefit of this kit. With a height range of 9 inches to 14 inches, it is designed to fit a variety of tank sizes and shapes, making it a versatile choice for any home.
In addition to its practical features, this toilet repair kit is also built to last. The corrosion-resistant seal ensures long-lasting performance and durability, while the 5-year warranty gives you added peace of mind.
7. Kohler 1024385 Genuine Part Toilet Flush Valve Kit With 3 ¼” Flapper
If you're looking for a reliable and authentic replacement for your Cimarron Toilet's flush valve, then look no further than the Kohler Genuine Part Complete Flush Valve Kit. Designed with quality and durability in mind, this flush valve kit is the perfect solution for any homeowner or plumber seeking a lasting and effective repair.
Crafted from high-quality materials, this flush valve kit is built to withstand the test of time and provide a consistent, powerful flush every time. The kit includes all of the necessary components for a complete replacement, making installation quick and easy. Plus, with its precise fit for the Cimarron Toilet Class Five, you can rest assured that this Kohler Genuine Part will provide a seamless and functional replacement that is specifically designed to work with your toilet model.
In terms of specifications, this flush valve kit boasts model number 1024385, ensuring that you can easily find the correct replacement for your specific toilet. Whether you're a professional plumber or a DIY enthusiast, this flush valve kit is the perfect solution for anyone seeking a reliable and high-quality replacement for their Cimarron Toilet.
8. Dual Flush Toilet Repair Kit
The package includes a comprehensive set of toilet components that comprises of one toilet fill valve, one toilet flush valve, and one toilet push button. The toilet's double flush valve is specially designed to adjust the water level up and down, allowing for a full or half flush. This feature is an excellent way to save water and reduce unnecessary expenses. The flush valve height is 210mm/8.27", making it suitable for most standard toilets.
These toilet components are perfect replacements for damaged or worn-out parts. They are also easy to clean and maintain, ensuring that your toilet remains in good condition for a long time. The installation process is also straightforward, and it won't take much of your time. The half and full water level adjusters enable you to control water consumption effectively.
9. Hydroright Toilet Kit – Water-Saving Dual Flush!
The Water-Saving Dual Flush Toilet Repair Kit is the perfect solution for those who want to save water and eliminate common leaky toilet problems. With this kit, a standard toilet can be easily converted into a dual flush toilet, which reduces the amount of water used with each flush. This is made possible by the Permafit silicone seal, which is chlorine and chemical resistant and will not warp.
Say goodbye to toilet leaks, as this kit eliminates common leaky toilet problems due to a worn-out flapper, handle, or faulty flapper chain. Installation is hassle-free, as it can be done without tools in just 5 to 10 minutes, and tank removal is not required. The adjustable height of 11-13.8 inches makes it easy to install on almost any toilet.
The Dual Flush Converter is compatible with standard 2 in. flush valves and requires a 10-inch minimum clearance from the highest point of the flush valve opening to the inside of the tank lid. It is important to note that it is not compatible with Mansfield toilets. The HYR451T combines two products that together will increase your toilet's efficiency: HYR271 Dual Flush Converter and HC630 HydroClean fill valve.
The unique split-handle design of the dual-flush light-touch lever is another great feature of this kit. The short center lever is the Quick Flush setting that uses significantly lower water volumes for liquids and paper – this setting is needed 4 out of 5 times. The second complete push lever at the end is the Full Flush that uses the normal amount of water for solids.
During installation, it is important not to remove the overflow tube and flush valve from the toilet tank, as the Dual Flush Converter is a replacement for the existing flapper. Simply slide the blue silicone dome gasket down the overflow tube, seating the gasket into the flush valve.
This kit also detects leaks and signals when a leak is found. The Total Repair Kit can be calibrated to adjust the exact amount of water needed, which saves water. Overall, this Water-Saving Dual Flush Toilet Repair Kit is an excellent way to save water and eliminate common toilet problems.
10. High Performance Toilet Repair Kit By Fluidmaster
If you're tired of dealing with noisy, running toilets, the 3” flush valve PerforMAX Kit is here to help. This kit is designed to fit a variety of toilet brands, including American Standard/Eljer, Glacier Bay, Kohler, Toto, and many others.
One of the standout features of this kit is the 3” water saving adjustable flapper that's included. This flapper is designed to help you save water without sacrificing performance. The solid flapper frame is also resistant to bending, which ensures a secure seal every time you flush.
This kit is also adjustable, making it easy to customize the height of the valve and flapper arms to fit most toilet models. It's best used in toilets with 1.28 HET & 1.6 gallons per flush, helping you efficiently control water use and levels.
Another great feature of the 3” flush valve PerforMAX Kit is the silicone seal. This seal lasts up to 10 times longer than standard flappers, which means you won't have to worry about replacing it as often. And, with the anti-siphon design, you can rest assured that this kit is code approved and safe to use.
Best Toilet Flush Valve Replacement Kit FAQs
Are there any eco-friendly toilet flush valve replacement kits available?
Yes, there are many eco-friendly toilet flush valve replacement kits available in the market. These kits are designed to help you save water and reduce your water bills, while also reducing your carbon footprint. Some of the popular eco-friendly toilet flush valve replacement kits include dual flush valves, which allow you to choose between a full and half flush depending on your needs. This can lead to significant water savings over time. Another option is a toilet fill valve that adjusts the water level in your toilet bowl based on the amount of water used during the flush. This ensures that you are using only the required amount of water and not wasting any. Additionally, some eco-friendly toilet flush valve replacement kits come with water-efficient showerheads and faucets, further reducing your overall water usage. Overall, these eco-friendly toilet flush valve replacement kits are a great investment for anyone looking to save water, reduce their water bills, and help protect the environment.
Are there any warranties or guarantees offered with toilet flush valve replacement kits?
Yes, most toilet flush valve replacement kits come with warranties or guarantees. The length and terms of the warranty or guarantee may vary depending on the manufacturer and the specific product. It is important to carefully read the packaging or product description to understand the details of the warranty or guarantee.
Some manufacturers offer a limited warranty that covers defects in materials and workmanship for a specific period of time, while others may offer a satisfaction guarantee that allows customers to return the product if they are not completely satisfied. Some warranties may require the customer to register their product within a certain timeframe in order to be eligible for the warranty coverage.
It is always a good idea to keep the packaging and any receipts or documentation related to the purchase of the toilet flush valve replacement kit in case any issues arise and you need to make a warranty claim or return the product.
Can a toilet flush valve replacement kit fix a constantly running toilet?
Yes, a toilet flush valve replacement kit can fix a constantly running toilet. A constantly running toilet can be caused by a variety of issues such as a faulty flush valve, flapper, fill valve, or overflow tube. The flush valve is responsible for releasing water from the tank into the bowl when the toilet is flushed. If the flush valve is not functioning properly, it can cause the toilet to continually run.
To fix this issue, a toilet flush valve replacement kit can be used. The kit typically includes a new flush valve, flapper, and other necessary components. The process involves turning off the water supply to the toilet, removing the old flush valve and flapper, and installing the new components.
It is important to ensure that the replacement kit is compatible with your toilet model before purchasing. Additionally, if you are not comfortable with DIY plumbing projects, it may be best to consult a professional plumber to complete the installation. A properly functioning toilet can save water and money in the long run.
How easy is it to install a toilet flush valve replacement kit?
Installing a toilet flush valve replacement kit is a relatively simple task that can be accomplished by most DIY enthusiasts with some basic plumbing knowledge and simple tools. The process involves shutting off the water supply to the toilet, removing the old flush valve, and installing the new one in its place. The kit typically comes with the necessary components, such as nuts, bolts, and gaskets, and may include instructions to guide you through the process.
However, the difficulty level of the installation may vary depending on the type and brand of the flush valve replacement kit, as well as the condition of the existing toilet. Some kits may require more steps and adjustments than others, and some may not be compatible with certain toilet models. It is important to carefully read the instructions and ensure that you have the right tools and materials before starting the installation. If you are not confident in your plumbing skills, it may be advisable to consult a professional plumber for assistance.
How much does a toilet flush valve replacement kit cost?
The cost of a toilet flush valve replacement kit can vary depending on the brand, type, and where it is purchased. On average, a basic flush valve replacement kit can cost anywhere from $10 to $30. However, more advanced models with additional features such as adjustable water flow or dual flush options can cost upwards of $50 or more. It is important to note that while a basic kit may be cheaper, it may not have the same durability or efficiency as a more expensive option. It is also recommended to consider the cost of installation if hiring a professional plumber, as this can add to the overall cost. Ultimately, the cost of a toilet flush valve replacement kit will depend on individual needs and preferences.
Is it possible to replace a toilet flush valve without hiring a plumber?
Yes, it is possible to replace a toilet flush valve without hiring a plumber, but it requires some basic plumbing skills and tools. The flush valve is responsible for regulating the water flow from the tank to the toilet bowl, and if it is not working properly, it can cause the toilet to run constantly or not flush at all.
To replace the flush valve, you will need to turn off the water supply to the toilet, drain the tank, remove the old valve, and install the new one. You will also need a wrench, pliers, and a sponge or towel to clean up any water spills.
It is important to ensure that the new flush valve is compatible with your toilet model and that it is installed correctly to prevent any leaks or malfunctions. If you are not confident in your plumbing skills, it may be best to hire a professional plumber to ensure that the job is done correctly.
What are the features to look for in a high-quality toilet flush valve replacement kit?
When looking for a high-quality toilet flush valve replacement kit, there are several features that you should consider. Firstly, the material of the valve should be durable and resistant to corrosion and wear. Look for valves made from materials such as brass or stainless steel.
Secondly, the kit should include all the necessary components for a complete replacement, including the valve, gasket, bolts, and nuts. Make sure that the size of the valve matches with your toilet’s specifications.
Thirdly, the valve should be easy to install and come with clear instructions. A good valve should also be adjustable, allowing you to control the water flow and pressure.
Fourthly, consider the brand reputation and customer reviews. Look for a brand with a good track record of producing quality toilet parts and read reviews to see what other customers have experienced.
Finally, consider the warranty offered by the manufacturer. A good warranty will give you peace of mind knowing that you are protected in case of any defects or issues with the product. By considering these features, you can ensure that you choose a high-quality toilet flush valve replacement kit that will last for years to come.
What are the most reputable brands for toilet flush valve replacement kits?
When it comes to toilet flush valve replacement kits, there are numerous reputable brands available in the market that offer high-quality products. Some of the most popular and trusted brands include Korky, Fluidmaster, American Standard, Kohler, and TOTO.
Korky is a well-known brand that offers a wide range of toilet flush valve replacement kits that are easy to install and come with a universal design to fit most toilets. Fluidmaster is another reputable brand that offers durable and reliable flush valve replacement kits that are easy to install and come with a wide range of features. American Standard, Kohler, and TOTO are also popular brands that offer high-quality flush valve replacement kits that come with excellent warranties and customer support.
When choosing a toilet flush valve replacement kit, it's important to consider the brand's reputation, product features, and warranty. It's also important to select a kit that is compatible with your toilet model to ensure proper installation and optimal performance.
What is the average lifespan of a toilet flush valve and when should it be replaced?
The average lifespan of a toilet flush valve depends on several factors such as usage, quality of the valve, and maintenance practices. Generally, a flush valve can last for around 5-10 years. However, if you notice that your toilet is continuously running or taking longer than usual to fill up after flushing, it may be an indication that the flush valve needs to be replaced.
Another sign that your flush valve needs replacement is if you notice water leaking from the tank into the bowl. This can cause a significant increase in your water bill and could lead to further damage if not addressed promptly. In addition, if you notice that your toilet is not flushing correctly or it requires multiple flushes to clear waste, it could be a sign that the flush valve is malfunctioning.
To ensure the longevity of your toilet flush valve, it is recommended to perform regular maintenance such as cleaning the valve and tank, checking for leaks, and replacing worn-out parts. If you notice any of the signs mentioned above, it is best to replace the flush valve to avoid further damage and ensure efficient water usage.
What is the best toilet flush valve replacement kit for my specific toilet model?
To determine the best toilet flush valve replacement kit for your specific toilet model, you will need to identify the make and model of your toilet. This information can be found on the inside of the tank, on the back of the toilet bowl, or on the original documentation that came with the toilet.
Once you have identified the make and model of your toilet, you can search for replacement flush valve kits that are specifically designed for your toilet. Many manufacturers offer replacement parts for their toilets, so it may be helpful to start your search with the manufacturer's website.
When choosing a flush valve replacement kit, it is important to consider the quality of the materials, the ease of installation, and the compatibility with your existing toilet components. Look for kits that include all of the necessary hardware and instructions for installation.
If you are unsure about which flush valve replacement kit is best for your toilet, consider consulting with a licensed plumber or a home improvement professional who can offer guidance and recommendations based on your specific needs.
