The Barkan long, full motion, three – movement ceiling TV mount with telescopic, swivel and tilt options fits flat / curved screens sizes 13 – 75 inches and weight up to 95 lbs. The mount has 10 optional height levels, minimum distance from the ceiling is 16 in.
and the maximum distance is 63 in. It fits TVs with VESA and non VESA standard (Bracket Mounting Holes Patterns) from 75×75, 600×400 mm. The telescopic pipe is made of three sections. The middle section can be easily replaced by any length of pipe according to your need.
In order to offer a better point of view, the mount has two pivots: swivel near the screen connection plate 160 in addition to a tool free tilt from 0 till 20. Its color is white. Please check the list of included screen-connection screws in the assembly instructions.
If your screen requires different screen-connection screws.
This works super well! It is white which blended well with my decor, but the best part was being able to put a large tv from the ceiling instead of backing in the corner between two windows which was what I was looking at having to do.
I didn’t want to, since flat screens are so wide, I feared it wouldn’t swivel or push back that far. This was a way better option. Ran the cords along the ceiling and down to an extension cord, so they hide behind the curtains just fine.
Definitely need about 3 people to install if your tv is large. Two to hold and one to bolt. Other than that, the directions were very clear. Can be mounted into stud, plaster, brick, or blocks. Instructions and hardware are included for every option so no need to buy anything extra.
TV Wall Mount Bracket with Full Motion Swivel Arm is VESA 75 x75 and 100 x 100 compatible and comes with clear instructions for easy installation in landscape or portrait configurations. Sit back, relax, and enjoy optimal viewing anywhere in your home with the Mount-It! With single-stud installation and quick release mounting plate, the Mount-It! TV Wall Mount Bracket with Full Motion Swivel Arm makes it easy to place and adjust your television for perfect viewing whether you’re sitting in your favorite chair or stretched out on the couch.
This articulating TV wall mount tilts, rotates, and swivels for the perfect angle to watch your favorite, shows, movies, and sports and allows you to create an ergonomic position to avoid unnecessary neck and back strain.
Supporting up to 33 pounds, the mount is crafted with heavy-duty materials and a sleek finish to blend in perfectly with any decor.
We purchased this TV mount to enable the TV to extend beyond the end of a fireplace. The TV is recessed in a pocket between the fireplace and a window. This mount allows us to telescope and turn the TV so all can see beyond the fireplace.
I consider the unit exceptionally well-constructed and designed. The mounting kit contains a variety of fasteners to anchor the unit to the wall. In our case, we needed our own lag screws to secure the frame to the stud pattern on the wall.
The unit is is rather ornery and cumbersome to install. Plan on two people to install. The mounting template works well. But it is important to measure the mounting slots in the unit’s frame to ensure the one’s chosen align with the wall stud’s locations.
I recommend using a level and drawing a centerline for the fasteners to follow. Pre-drill holes into the wall studs. I strongly recommend not mounting through the drywall with plastic expansion anchors.
There will be a lot of bearing on a material that is not designed for long-term structural integrity. We use all of the mount’s 40″ extension. It certainly meets our needs.
I chose this mount based on reviews and because I was terrified that more affordable mounts may weaken over time and eventually fail. Had the mount professionally installed and the installer said that he’s seen a ton of mounts and this one is definitely one of the sturdiest he’s ever seen.
Ours is holding a 65 inch TV and it articulates so smoothly. No concern about it being unable to hold the weight at all. Well worth the price for quality and it’s ability to articulate. Fast shipping.
TV mount is strong as Superman, Huge as Hulk, Handsome like Thor. The one and only TV wall mount brand you can trust. Size capacity : 42-75”/Max Weigh capacity : 132 LBS. /Max VESA 600 x 400mm. TV mounts are fun and convenient that can move in all directions.
With this, you’ll find anywhere relaxing like home.
This is by far one of the best mounts you can get! I bought this mount because I specifically wanted a mount that was capable of laterally shifting the TV to the left or the right since I knew I the studs I’d be securing the mount to would not line up so that the TV was centered on the wall where I wanted it to be.
I looked at every fully articulating mount I could find under $200, and I didn’t want to pay $200, and I was able to find 5 mounts that allowed the TV to be laterally shifted. In my case I wanted a mount that you could laterally shift any time you wanted, rather than shift it once and then screw down bolts to lock it in position.
I called up all 5 manufacturers to see if their mounts allowed me to do what I wanted. One place I couldn’t get through to speak to someone. Two of the manufactures said I needed to lock down the lateral shifting component after getting the TV where I wanted it to be.
One place said maybe their mount could be used the way I wanted to use it, but did not recommend doing so. Mounting Dream was the only one who said their mount didn’t need to be locked in place after you make the lateral shift.
And they weren’t wrong. This is great for me. I can have the TV perfectly centered in the room when I have others over to watch TV with me, but most of the time I watch TV alone and when I do I usually lie on the couch on the left side of the room.
In the case of me watching TV alone on the couch, I laterally shift the TV to the extreme left while also swiveling, rotating, and extending the TV so that I have the best view of the TV I could possibly have.
Even if I didn’t want to shift the TV left, right, or center depending on where I sat in the room or if I’m watching TV alone or with others, I think all fully articulating mounts should have the capability to laterally shift the TV since you can’t count on the studs you use to install the mount on to be perfectly positioned so that your TV ends up exactly where you want it on the wall.
So I really like how this mount lets you shift the TV laterally anytime you want to. That being said it isn’t the easiest TV adjustment to do. It’s not hard. You just have to be a little careful how you do it so you don’t put too much stress on the TV when sliding it over.
I find it’s best to use one hand to push on the mounting arm close to the wall while at the same time use your other hand to lift up/support the TV from the middle of the TV. Everything else about the mount is great too.
It’s easy to extend and swivel the TV. You can level the TV after the mount has been installed. Another thing that stood out with this mount was how easy it is to adjust the tilt of the TV. Sometimes my back acts up and when it does I find lying on the ground helps a lot.
So when I’m lying on the ground to watch TV I like to have the TV tilted all the way down. This mount has 2 nice handles that allow you to loosen up the tilt of the TV, set it to where you want it, and then tighten it quickly and easily.
I’ve seen a lot of mounts that require an allen wrench to make the same adjustment. Using an allen wrench is not as easy or quick. Another great feature is this mount is made strong with excellent craftmanship.
I’m using this mount for my 55″ Sony A8H which only weighs 37. 1 lbs. , but I have no doubt this mount could handle a TV at it’s maximum weight capacity of 100 lbs. The only small complaint I would make about this mount is that the joints in the mounting arms were way to stiff which made it difficult to extend/retract the mount and swivel the TV.
I ended up loosening up the bolts just a little and now I can easily move the TV anyway I need to. The mount includes 2 different allen wrenches. These are the correct size for loosening up the bolts to level the TV and to laterally shift the TV.
Unfortunately they didn’t include a third allen wrench which you would need to loosen up the bolts in the arms of the mount if your mount arms are too tight/stiff like mine were. Speaking of allen wrenches, the mount has places built in to permanently keep the allen wrenches which I think is a clever and convenient feature.
This mount was easy to install and included really good directions and a mounting template. It comes with a lot of bolts to accommodate just about any TV. Also included are two cable management brackets that attach to the mounting arms, and several velcro cable ties.
You also get an HDMI cord which is nice but I already have more HDMI cords than I know what to do with so I would have preferred Mounting Dream to not include one and instead lower the price of the mount accordingly.
This truly is one of the best mounts you can get. It’s able to do everything I wanted it to do. It’s well made, strong and sturdy. If I needed another one I’d buy it in a heartbeat.
I purchased this mount prior to getting my brand new Samsung QLED Q80A (2021) 65″ TV. While waiting for my TV to ship, I went ahead and installed this on my wall. The reason I went with this mount is because the studs on my wall would not allow for centering the mount on the wall.
My wall is 68″ wide, and the studs were off-center. The great thing that this mount does, once installed off-center like I had to, is that you can then slide the full motion part left-right up to 8″.
This will allow me now to center my TV exactly in the middle of my wall. Very few, if any other full motion wall mounts do this. So this fit my purpose exactly. What I didn’t expect is how well built this mount is.
Seriously, this is a heavy unit made of out steel, while the horizontal bars the TV brackets mount to is aluminum. Exceptionally high-quality. Instructions were very clear and simple to follow, plus the cardboard template made for easy marking of the drill points on the wall.
This also came with a nice level to make sure you mount it level on the wall. If for some reason you messed up and it’s a little off, there are adjustment screws that can level it correctly. The only issue I had when I finally got my TV and was ready to mount the brackets to the back of the TV, was that I didn’t have the correct screws.
My TV requires M8x1. 25 x 26 to 28mm length screws. The M8 screws that came with the wall mount only came in 25mm and 40mm sizes. I didn’t want to use the 40mm size ones by using the included spacers.
A quick call to MountingDream and they sent me M8 30mm screws, which will work fine despite being 2mm longer than the max size my TV requires. That’s because the thickness of the bracket is 2mm, so that’ll make the screw go in right to 28mm into the TV.
I am VERY particular with my products and was hesitant to get something other than the SANUS mounts I’ve always bought before. However, the quality, craftsmanship, details, and exceptional customer service are far above and beyond anything I’ve experienced.
One final note. to further test my installation, I hung myself (5’7″ and 160lbs) from the mount, and no issues at all.
Hi, there, MountingDream, I had both of my MountingDream full motion TV mounts installed yesterday. I believe my home contractor, who had been skeptical of the quality and control of full motion mounts, was convinced by the end of the installations that yours are of superior quality.
I only have the smaller tv hooked up so far and it seems to work very, very nicely. The TV for the other mount is due to be delivered in a few days. As a non-contractor, I found your website to be overwhelming and impossible to navigate.
It’s only my ignorance of the various configurations of TVs that made selection so difficult. That said, the response of your customer service team to by direct inquiries about specific TV models was outstanding: prompt and clear.
That, I think, is your ace in the hole, as they say, the service that sets you apart.
Excellent mount! I picked this out and installed it for a friend. It works like a dream. Just a little warning for the occasional weekend DIY warrior, the instructions called for using a 7/32 drill bit to pre-drill your studs with.
Please, please don’t without comparing that bit to the included lag screws. With the lag screws that I received, a 3/16’s bit was the perfect size. This mounted a Hisense 55h6d, which was set up for a 200 by 200 VESA configuration, which meant I didn’t have to assemble or use the extra bracket assembly.
Also, familiarize yourself with the little handle that locks in the up and down tilt on the right side of the mount. It’s only one half of an adjustment that’s meant to permanently lock in the degree of tilt you desire.
There’s a set screw on the opposite side to also tighten down. Other than that, this kit is straight forward and easy to install, while also of a high quality design. P. S. it was nice that they included an HDMI cord, but it’s pretty useless if you’re hiding in an thru the wall installation.
I was able to just swap that 6 footer for another longer cable I had in another area.
We moved our old plasma TV to the second floor in our game room. It鈥檚 a 58 inch Samsung and we鈥檝e very much enjoyed it for the past 9 years. The plasma TV鈥檚 are considerably heavier than the LED鈥檚 but the Mounting Dream MD2296-24 says it can handle up to 100 lbs which is more than enough (58 inch plasma = 85 lbs).
Everything about the mount was superb. The box it came in; the instructions; the ease of installation. The design allows the ability to place the mount on the wall and install brackets on the TV, then place the TV with the brackets on the mount.
The kit even comes with a template and a level. I didn鈥檛 use the template, but the level came in handy. This particular model also allows for different widths of wall studs. All the hardware is included.
The big test is when I had to rewire a couple of devices a few months after installing the TV, and the mount worked flawlessly. We don鈥檛 move the TV very often on the swivel, but even with a TV this large and heavy it feels stable when moving or swiveling it.
For the price I would definitely recommend this product.
Excellent TV wall Mount. We installed it with no problems and mounted our 65″ TV in minutes. They made this easy – you lift the TV & set the bracket you have installed on the TV onto the bracket on the wall mount, Then you screw down two clamps.
That way, I wasn’t trying to hold up a 65″ TV while my husband got the clamps tightened. (yeah, I’ve been there before). For that alone, I am very happy. I love the full motion – tilt up, down, side-to-side, plus a leveling adjustment.
The side-to-side is great because I can angle it to watch while I am in the kitchen. It is very easy to move and it stays where I move it. But even better – it retracts fairly close to the wall, considering the mechanism to provide all of that flexibility.
It is very strong – I can’t imagine this having a problem holding up an even bigger TV securely. I have nothing negative to say about this TV mount; I will be buying this again for other TVs in the future.
Ceiling mount | adjustable | for 32 to 75 inch TVs Save space by hanging your 32″ to 75″ flat screen TV from the ceiling Long rod with extension from 2. 5 to 3 m for versatile use The ceiling TV holder +60°/-60° can be swiveled to adapt to sloping ceilings or ceilings Robust ceiling mounting made of steel with a load capacity of up to 50 kg Fully movable support allows the display to be swiveled by +180/-180 ° around the bar and tilted by 25 ° without using tools This flat panel TV ceiling mount supports VESA mount compatible TVs from 32″ to 75″ at a maximum load of up to 50 kg.
You save space on a wall or ceiling by placing your flat-screen LCD, LED or plasma TV in a clearly visible area. The ceiling mount is ideal for use in reception and entrance areas or other high ceiling areas.
Adjustable Height The TV can be mounted at the desired distance from the ceiling using a telescope-style bar. Suitable for different ceiling heights. The steel rod can be extended from 2. 5 to a maximum of 3 m and offers a total height difference of 0.
5 m. Ideally adjustable to your ceiling height The flat panel ceiling mount is designed to accommodate many different types of ceiling. The TV is swivel-mounted, so you can adjust it at eye level to almost any kind of ceiling, including sloping ceilings (up to 60 °) and horizontal (flat) ceilings.
Visible from any direction Tilt your TV down (up to -25 °) to a comfortable viewing angle for maximum visibility to your audience. With the fully movable swivel arm, you can rotate your display +180/-180 ° around the rod without using tools.
Fastening concept with hook Simply mount the vertical brackets with the built-in hooks on the back of your TV. TV hangs securely on wall mount the preset adjustment at eye level guarantees the ideal positioning after hanging up.
I wish I could give this bad boy 10 stars because dang! We hated how our livingroom was set up before, we didn’t want to drill a wall mount into our rock fire place and potentially ruin it. We were told about a ceiling t.
v mount and immediately bought it! It holds our 65 inch perfectly. It came with a template to know exactly where you needed to put your screws so you didn’t mess it up. I really like that you can put it on an angled ceiling and also bend the t.
v at an angle so it isn’t straight. The range of motion is fantastic, it can go all the way around if you wanted it to. You can also run the wires through the bar to hide alot of mess ( ours isn’t on our ceiling yet.
) I was hesitant about putting a brand new t. v up there, but I can tell you it isn’t going anywhere. The only thing I did not like is, the screws that were provided to mount the bracket onto the t. v some were way to long and others were way to short.
There weren’t any in between so we were worried about them breaking. The new t. vs are very thin and we had a hard time finding the right ones. Overall it wasn’t a big deal and we figured it out since it did come with some stoppers.
If you are in the fence, don’t be, you will be so happy you finally did it (just ask my husband. ).
I wanted a mount for my living room TV that allowed for some extreme angle adjustment so we can see it from the dining room as well as the living room. This mount does the trick in the end. First impressions were of a solidly built, clean looking mount.
Very heavy and sturdy. It’s narrower at the wall side than other mounts I’ve installed, which is great but also doesn’t give a lot of option for placement while ensuring you’re mounting directly to the studs.
I’ve mounted 6 large screen TV’s before this one, and they are always fraught with some issue midway through the job. In this case I found where I wanted to mount didn’t cover any studs, so I was going to have to use drywall anchors.
After I found the precise, level position for the 6 holes, drilled and inserted the anchors that came in the box, the matching screws were in fact not a match. They just didn’t hold in the anchors. So now I had 6 anchors and no screws in the wall.
After a late night trip to a hardware store, I found a better drywall anchor system, pulled out the plugs and proceeded to finish the job. Lesson here is, make sure you have everything you need before you start and don’t rely on the wall mounting hardware included in the box.
I’m pretty sure they advise in the manual that they don’t include mounting hardware for every situation, but I really thought what was included would work. I didn’t love the TV side of the mount either.
It was much more complicated than other mounts I’ve used, and putting the TV on the wall part of the mount required two people and was a bit tricky with the small bolts that had to be screwed in the hold it in place.
Other mounts I’ve used allowed one person to just lift and hang the TV on the rail and then lock it all in place. Once everything was installed I found that the movement was quite easy and allowed the TV to go out far enough for our 50″ slim bezel TV to almost turn 90 degrees which is impressive (it’s about 70-75 degrees I think).
Cable management is not bad, but I find with my cabling it still gets a bit bunched up when you push the tv flat against the wall. Also I wish the TV went closer to the wall. With some adjustment of the cabling it might go another inch.
Overall I’m happy with this mount. It’s solid, moves well and gives great range of positioning. I received this product in exchange for an unbiased review.
Mount itselft is very good quality, but the packaging it comes in is very questionable. 1st one I received had already been opened, items were missing and scratches on mount indicating it had been used before.
The replacement wasnt much better, the plastic covers for the mount were broken. I needed one urgently so just used what was given. Wouldn’t recommend this product unless you are picking it up directly from the supplier.
Choose your viewing angle on this Rocketfish full-motion TV wall mount. A 23-inch articulating arm moves the television away from the wall, and a 50-degree swivel mechanism offers multiple positioning options.
VirtualAxis tilt technology allows simple adjustments from +5 to -15 degrees. Compatible with most 40′′ – 75′′ TVs Up to 100 lbs. for sturdy support. Keep unsightly cables and cords concealed Built-in wire management makes it easy to achieve a neat, clutter-free TV setup, without visible cable tangles.
Tilt, swivel, leveling and depth capabilities Let you adjust the viewing angle to suit your preferences. Mounting hardware Makes installation simple. VESA Compliant Including 100mm x 100mm and 600mm x 400mm for a variety of mounting options.
I have bought and installed 4 of these wall mounts, 3 of them with the sound bar mount that you can buy separately. I love these mounts, they are very solid and I’m very confident in them holding my TV’s up, even with the mount fully extended.
Setting up the first mount was a big overwhelming because there was so much in the box, but the instructions are clear and easy enough to follow. By this 4th mount I installed, I had it down and I didn’t even need the instructions.
Setting up with the sound bar mount makes it a bit more complicated, but totally worth it. These mounts are not light, they are made with some heavy metal. The look it gives is super clean and tidy. The only gripe I have with it is the price.
I feel like it just doesn’t need to be so expensive, but you are at least getting a very high quality product.
Instructions are easy to follow and the template made it easy to mount. We only had 2 issuers, 1 was the distance of the mounting. Our studs are farther apart than normal so the way it is set up to mount would not have worked for us if it had not been for an extra stud that was added due to wiring when they build the house (and luckily we took pictures of the framework when the house was being built) the 2nd issue we had was that it is NOT designed to mount a curved tv…or at least, it doesn’t come with the correct hardware needed to mount a curved tv.
Luckily, we had spacers from a previously mounting that same curved tv that we had saved…(thank goodness for a husband who keeps things just in case) other than that, it works well. The mount pulls out with no problem.
I wanted to get a nice mount for my new expensive LG CX TV. I usually just bought cheap mounts online that worked perfect, but since I was spending a lot on tv I wanted something nice. This product never worked out of the box.
The Mount does not want to keep my TV level. No matter what I tried everything, contacted everyone, read online nothing could help. A lot of people had the same issue online. I had 3 of my good construction buddies messing around with it.
All and All for $180 this is the worst money you could spend.
NP47 is a new TV wall mount by ONKRON, a combination of ultra-slim design with an impressing arm extension. It fits most modern TV screens with diagonal 40 – 75 inches and universal VESA patterns: 200×200, 200×300, 200×400, 300×100, 300×200, 300×300, 300×400, 400×200, 400×300, 400×400 mm.
Its high-quality steel construction with two columns can hold TVs weighing up to 77 pounds in absolutely safety. You can extend the arm up to 27. 9 inch from the wall and there will be no bending, but you will be able to swivel bigger screen sideways.
When the mount is folded it is only 2. 5-inch and cannot be seen behind the TV. Fully adjustable bracket gives you an opportunity to set the best angles while watching you can tilt your screen -5 ~ +8 degrees.
All needed hardware with a detailed guide comes with the mount. It also has built-in spirit level so you can align it accurately. Cable management panels will keep all cables and wires organized.
Eliminate the need for a bulky TV stand with this Dynex full-motion wall mount. Helping you make the most of your space, this wall mount is compatible with TVs ranging from 47 to 70 inches and features tilt, swivel, and arm extension capabilities to provide maximum viewing flexibility.
Finally mounted TV using this full motion mount. Same mounting principles as any other mount so everything was straight forward other than having to calculate correctly to ensure TV could be centered perfectly in the required space – mount had just enough lateral flexibility to get the job done based on stud locations.
Very stable in that I know it will hold the TV. I had to really tighten the tension bolts at the pivot points because I have my sound bar attached to the TV adding more bottom weight so this made the mount a little stiffer and harder to micro-adjust.
Otherwise the TV would slide downward on its own from the zero degree north/south viewing angle. Also each time you make an adjustment, you will need to ensure the screen is leveled because it’s just hard to make a single micro adjustment without something else moving.
I don’t intend to move the TV much so once it’s in perfect position to my liking it is set it and forget it. Used an in-wall cable management kit from HD so TV looks great outstretched from the wall 5-6″ and “floating” in space with no wires/cables in sight.
I bought this thinking it would enable us to pull the tv from the wall to change connections, tilt up and down and left and right. And it does. But it also angles the tv in a circular , 180 degree motion.
That’s not something most people would ever want to use in my opinion. The bad thing is once you move your tv in any direction this mount will never hold it level again because of that feature. Our installers hung the tv perfectly straight and level but they tilted it downward.
We had it hung at eye level so we didn’t feel we needed it tilted. So I asked them to just tilt it back up straight. Since then the tv always look slightly crooked. You can grab one end and straighten it so it’s level but it just gradually moves right back out of place.
It’s slight but it’s quite noticeable and really irritating. This is apparently a known issue, at least with the installer who came out. He told us once you move this particular mount this happens. So now we have a statue propped under one corner to keep the tv straight.
This product was ordered for me by the sales representative to go with the new tv and sound bar I purchased. It was very sturdy coming out of the box. Unfortunately, I was not informed that this mount only works for 16” stud spacing.
More than 15 days after purchasing, I go to install the mount and discover I have 22” stud spacing. Of course it is now beyond the 15 day return policy period so I cannot return the product. Be VERY careful when purchasing large appliances and accessories from Best Buy.
With their short return policy, if you do not set up a product immediately and run in to incompatibility issues within your home you cannot return the product or exchange it. For me, this means I will not be making semi-major or major purchases from Best Buy again.
I am not an install immediately type of person; others may be. I will warn my friends and family about this policy and advise accordingly.
This heavy-duty TV ceiling mount is the perfect solution for mounting your TV or display in unique environments. Sometimes there just isn’t enough wall space or sometimes a better solution is needed to maximize visibility.
This ceiling TV mount is designed to do just that, with its full motion capabilities and ability to mount it on a flat or slanted ceiling. This TV mount is great for both public and in-home spaces. Fits TVs with VESA patterns from 200x200mm to 600x400mm, screens up to 75″, and holds up to 110lbs This TV mount can be mounted to flat or slanted ceilings Height adjustable, tilt and swivel to maximize your TV Ideal for use in bars, theaters, businesses, schools, hospitals, lobbies, hotels, manufacturing plants, production lines, and many other environments.
This ceiling mount was just what I wanted. Easy to assemble, and is sturdy. I would order another if the situation presents itself. It arrived quickly which was a plus. Would highly recommend ordering from these guys!.
Sturdy mount but the screws they included were not strong enough for this mount. My installer had better hardware. I only gave 4 stars because of the hardware so be prepared to buy your own if you’re installing yourself.
Easily position your TV in either landscape or portrait orientation using this Landscape/Portrait TV Wall Mount. It supports TVs between 40in-75in and weighing up to 110 pounds. It supports displays with Vesa mounting pattern from 100×100 to 640×400 (400×640 in portrait orientation).
It is a fully articulating mount, which means that it can swivel 60degrees to either side, tilt from +10degrees to -5degrees, and rotate 5degrees. Additionally, you can push the display in to the wall so it extends only 3.
2in or pull it out to the full 20. 1in extension, so you can use the full swivel range.
Great mount. Best advice: measure 10 times, drill once. Dimensions are accurate. Build quality great. Make sure you have the right tools and you think through measurements for a straightforward install.
I used it for my 65? OLED (55 lbs) and it?s great. Highly recommended.
The PDX650W from Kanto is a full motion TV wall mount that allows your flat screen TV to sit 2 from the wall. Its generous tilt and swivel capabilities are complemented by 21. 8 of extension, making it easy to place your TV in the most optimal position.
Exceptionally strong yet lightweight enough to make installation a breeze, this TV wall mount will ensure your TV remains safe and secure. Available in black and white finishes.
Definitely, the way to go with a wall-mounted tv. Do not bother with a single arm unit – it will never be level. The dual arms were great, very stiff, and over tightened out of the box though but after a bit of a loosen they work great.
The TV swings freely from side to side, in and out as straight as an arrow. I would like to see a mounting option without the long rails. In my case, I was attaching this unit to a vertical beam, so I removed the top and bottom rails (which are for studded walls) and used the up arrow hole in the top and a handy hole in the bottom.
worked perfectly. The TV mounting brackets that came with it for my LG 49″ TV were long for a VESA400 mount, and overhung my TV plug and covers my optical, coaxial plugs. Not a whole lot Kanto can do about this, just poor placement of stuff for my TV (maybe I should get a bigger TV LOL) Overall very happy, if I mount another TV it will be using these.
I just bought and installed the Kanto PDX 650 TV mount. What great product. I’m so used to receiving the IKEA bag of nuts, bolts, dowels and an Allen Key in a bag that I was pleasantly surprised to find the hardware so well organized in the packaging for this product.
It feels like whoever designed this may have actually tried to install it as if they were a consumer and thus got all the glitches out. I fully expected a challenge installing this but it turned out to be a piece of cake.
The template is great and the little dust collection tray at the bottom is really thoughtful and makes for a relatively low mess install. I found the installation video extremely helpful and I would highly recommend watching it prior to and during installation.
Also don’t neglect the written instructions. If you follow them exactly you will have no issues with your installation. I used it to mount a 58 inch Samsung TV. No issues. Found the appropriate bolts provided and everything worked as it was supposed too.
Provides lots of great options for angles to watch the TV. Great product and price. Highly recommend!!.
VideoSecu Universal Flat Panel Mount offers quality, versatility and security for most 32-70 inch Flat panel TV, do check TV VESA and weight. This tilt wall mount features a high capacity and low profile design, easy to installation and adjustable tilt for optimal viewing.
This tilt universal TV mount fits TVs VESA 200×100/200×200/300×200/300×300/400×200/400×300/400×400/500×200/ 500×300/500×400/600×200/600×300/600×400 mounting hole pattern up to 600 mm (24 inch) wide and 400mm (16 inch) high.
Notice: This mount fits most 32-60″ TVs, do not work for some old size 65-75 inch TVs manufactured before 2013 year.
Instructions are terrible the images are blurry and you cannot tell what part goes were! Sent wrong bolts no tools to help. Overall if you want to spend all day attaching this to your tv, than this is for you!.
This is a great buy, I was able to put my Proscan tv up with this wall mount. Its easy to assemble and the only thing I needed help with was lifting the t. v. ! I would definitely recommend and the price is well worth it.
I order mine online and it came in the mail 2 days later. Super quick delivery!.
Mount your flat-panel TV to the wall with this Dynex DX-DTVMFP23 wall mount that features a low-profile design for a sleek appearance. This fixed wall mount is compatible with most TVs ranging from 37 – 75 inches up to 120 lbs.
The spring self-locking system makes installation easy. *NOTE: earlier versions of package may reflect a maximum TV size of 70”, the mount is fully-capable of supporting most 75” TVs as long as TV is under the maximum weight capacity listed for the mount.
I have professionally installed hundreds of TV in the last two years. This is the biggest mount I could find. It has held a 4K 85″ TV just fine for 7+ months. The tilt position is still where I set it.
The tilt knobs did have to be tightened quite well, so it would hold. One of my tilt knobs arrived broken. With just a few e-mail messages, and a picture or two, a few weeks later, I had a new knob, which I installed with minimal difficulty.
This is a low profile mount, so do not expect it to tilt very far. You might find it easier to set the tilt knobs right before you actually hang the TV on the mount. YMMV, but it worked well for me. It is just over 32″ wide.
I drilled a new hole in the top middle, and bolted it to three wall studs using 5 lag bolts; 2-1-2. Like any TV wall mount, use at least 4 lag bolts, all into wall studs. Be safe, please. 11 people found this helpful.
Personally I am not pleased with this wall mount. Why you may asked. Well because you see the studs are 16 inches apart. The holes on the backplate to mount to the wall do not line up with 16 inch studs.
What I had to do was angle my screws to catch the studs. It is like 3/8 of an inch off. If you are not experienced in mounting TVs, and have wood studs, stay away from this or you will be very unhappy and your tv will fall to the ground if you think drywall is going to hold this.
Sure you could always get drywall anchors, but why risk it. Anyway I do not recommend this as it is not really meant for 16 inch studs. Only gave it 3 stars because I was able to still mount it and have to make it work due to my years of experience with mounting tvs.
I am sure if you are using this on concrete, or metal studs you will be fine.
This advanced tilt premium TV wall mount features a specialty design that enables the TV to extend outward, using the advanced pop-out mechanism, and allows large TVs to maximize the full tilt range that this mount has to offer.
Large TVs installed on normal TV wall mounts will hit the wall when tilted, limiting the range. This pop-out design also allows for easier, hassle-free access to the rear cables and ports.
This mount it TV Wall mount was very easy to install and the performance on the product is excellent. You can move, tilt tv in all directions; making easy for people like myself that love to move my bedroom around.
Very satisfied with my purchase and the delivery of the product itself.
This large, heavy-duty full motion TV mount lets you extend, swivel, and tilt your TV as needed. Have troubles with installation? No problem. Simply scan the QR code easily on the packaging to get help.
Purchased this mount yesterday (09-17-2022) after looking at all of the features and the display in the store. Before installation today, I watched the special video that was made strictly for this mount.
Was surprised to see that there is a stud finder with built in level and they even showed you how to use it. This was the first problem because the stud finder just blinked the entire time you were attempting to locate a stud and never went red on the edge of a stud.
The built-in level is all but useless because it is so dark you have to use a flashlight just to see it and the bubble extends almost to the edge of the tube. Fortunately I had a magnetic Stud Budy to find some of the nails in the sheetrock.
Mounting the device to the wall definitely takes two people to accomplish because of the weight of the mount but once up it is a solid mount. The next deficiency that I have found is the tilting adjustment.
Out of the box the tilt was forward and I followed the instructions for adjustment but there was no motion in the device. Had to take the TV off the mount, loosen the knobs, and the mounting bracket would move to the full vertical position then put the tv back on the mount and the bracket was no longer vertical.
I guess I will have to live with the slight tilt. The adjustment for left to right level is a plus in my book. All in all, I think that this is one of the better wall mounts out there and a good price.
This is the best and easiest TV Wall mart I have ever installed. took me 1hr. Last one took me 8hrs. The quality and workmanship is outstanding and the Price is great. Comes with a stud finder that actually works.
found all the studs and I verified by measuring the 16″ studs on center building code (fyi some older homes might be 12″ on center). Put up the template on the wall lined up the template mounting holes to the stud location and bingo drilled a 3/8″ drill bit into the stud on the very first time.
I used my 13 m socket to screw in the bolts can be a little tough. you will need help to mount the TV mount on the wall because it’s a 1 piece system and is heavy. both swing arm and mount are one piece (Remember to keep the swing arm out makes installing the TV on the bracket easier including attaching your cables to the TV).
make tilt adjustment before pushing back tv into your desire position) Remember to size the TV bracket mounting bolts/spaceers so you don’t crack tv case or over size the bolt lengths that will go through the TV screen.
all different sizes are provided in the kit. no need to go by addition mount bolts. Also keep the extra bolts in-case yo buy a new TV that would need a different bolts and spacers size.
This is an excellent tv mount, especially for the price. I found it to be higher quality than what’s available elsewhere. The package even includes a small stud finder and level to ensure you mount it in the right place and straight on the wall.
The mount is easy to move and offers adjustments to tilt and/or straighten the tv. There are cable management clips for routing wires which keeps the appearance neat. I also like the caps provided to cover the ends of the mount on the wall.
Vast improvement over seeing the ends of the metal frame. Another helpful feature is that it will adjust up to 45 degrees. Many of the other mounts I looked at would adjust only to 35 degrees. I have a 65″ tv and the arm length was more than sufficient to allow for the 45 degree movement.
Get the perfect viewing angle with the Hama 1 Star 118108 Tilt 32-75 TV Bracket. It lets you tilt your TV downwards, so that it’s directly facing your sofa or armchair. Its steel design is strong enough to display T Vs that weigh up to 40 kg.
You’ll also have anything you need to set it all up thanks to the mounting kit that’s included with the TV bracket.
TranslateShow in original languageZ plusów: uchwyt jest faktycznie slim. Jeśli zależy ci, żeby TV odstawał minimalnie od ściany, to jest to dobry wybór. U mnie całkowita odległość od ściany to 75mm (30mm uchwyt+45mm TV).
Po zamontowaniu prezentuje się bardzo solidnie. Z minusów: do zestawu dołączono kołki 8mm i śruby 8,8mm. Do takiego kołka ciężko wkręcić taką śrubę, dlatego od razu dokupiłem dobre kołki 10mm. W zestawie są tylko 4 kołki+4 śruby, co dla większego TV wydaje się zdecydowanie za mało.
Ja uchwyt zamocowałem na w sumie 8 kołkach. Największą wadą uchwytu jest brak możliwości regulacji pozycji TV już po jego założeniu. Po prostu w szczelinę 30 mm nie wejdzie żadna dłoń, a co tu dopiero mówić o operowaniu śrubokrętem.
Jedynym rozwiązaniem jest ustawienie pochyłu telewizora jeszcze przed założeniem na wieszak, natomiast dolnych śrub nie da się przykręcić w żaden sposób, na szczęście ich brak nie przeszkadza w bezpiecznym użytkowaniu uchwytu z telewizorem.
TranslateShow in original languageUchwyt zakupiony jako proponowany do LG 65C11. Fachowcy przywieźli, kombinowali ze dwie godziny i się poddali – nie ma jak podejść do śrub regulacji po zawieszeniu TV czyli nie da się ustalić prawidłowej pozycji odbiornika.
Poza tym załączone kołki nie trzymały śrub (obracały się zamiast “pęcznieć” w ścianie. Tylne gniazda nie do wykorzystania – wtyczka sieciowa i kabla optycznego wystaje poza obrys uchwytu, kabel hdmi podłączony przez złączkę kątowa ledwo się mieści.
Ogólnie mam 7 dziur w ścianie (dodatkowe kołki) a TV i tak wylądował na podstawce. Zanim kupisz superpłaski uchwyt do dużego telewizora – dobrze to przemyśl. Dla przykładu bliźniaczy uchwyt, ale do 42 cali udało się bez problemu powiesić (bez fachowców) i wyregulować i stary 42 calowy LG wisi w sypialni.
TranslateShow in original languageUchwyt jest bardzo slim, TV teraz wygląda jak obraz na ścianie. Warto napisać, gdy powiesimy TV nie ma szans by podłączyć jakiekolwiek przewody do niego, tak blisko jest ściany.
Do powieszenia potrzebujemy 3 osób, dwie trzymają TV a 3 wszystko podłącza. Wieszak za takie pieniądze 10 na 10.
Technical Details:High quality steel construction. one-touch tilt. Lift and lock systemFits VESA 600×400,400×400,400×200,200×200,400×300,300×300,300×200,200×100,500×300 Product Description:This low-profile tilt mount is designed for most 23-65 inch flat-panel TVs weighing up to 70kg.
VESA compliant for simple installation, supports TV with mounting hole patterns up to 23. 6″ horizontally, and 16″ vertically (VESA 600X400mm). Adjustable 15 degrees forward or backward tilts to provide comfortable viewing when the TV is mounted above eye level or to reduce screen glare.
Perfect choice for mount your flat-panel TV on a wall, with stylish appearance, and it makes TV viewing so much better. Open wall plate for electrical access. Common wall and TV attachment hardware are included in the box.
Make sure you get VideoSecu brand TV wall mount. Report to Amazon if received counterfeit or knock off mount not packed in VideoSecu colour box.
I am completely sold out to this wall mount. Affordably priced and easy to install. Most versatile out of other mounts I researched. Comes with hardware for all possible TV’s and situations so you can be confident everything you need is included.
I currently have 2 of these mounted in my house and have given a third as a gift.
I purchased this wall mount a while ago for my 42 Vizio (old school flat screen) and it held up so well I wanted to come back and write a review. This can definitely hold a heavy tv with no problems, my tv probably ways 100lbs.
Star Tech Low Profile TV Mount – Fixed – TV Wall Mount for 37 – 75” TVSave space while improving the appearance of your work area, with this low-profile TV wall mount. The mount sits close to the wall to support a VESA Mount compliant TV from 37” to 75”, and offers anti-theft protection.
Low-Profile Design for Meeting Areas or Digital Signage Mount your flat-screen TV or monitor in a location that’s convenient for visitors, clients or employees. The wall mount safely and securely supports your TV in a fixed position, less than an inch (22 mm) from the wall, to provide a sleek, low-profile look.
It’s ideal for lobbies, hallways, boardrooms, works areas, customer-facing areas or for creating digital signage. The wall mount supports most 37” to 75” (940 to 1905 mm) LED or LCD flat panel TVs weighing up to 88 lb.
(40 kg). Anti-theft Protection Engineered with heavy-duty steel, the robust steel TV wall mount securely supports your flat-screen TV, to protect your investment. Ideal for areas with high traffic and minimal supervision, the TV mount features a steel bar that can be locked into place with a padlock (purchased separately) to deter theft of your equipment.
Easy Setup A built-in level helps to ensure your TV is aligned in a straight position on your wall, to ensure optimum viewing.
Used this to mount an LG 43ud79 above a shallow desk and it has worked far better than I expected. Can’t see the side rails, there’s no need to add the plastic side pieces if you want it a little narrower.
Despite some suggestings I’d seen on the internet that using the VESA mounts on this monitor would require cutting away at the plastic back, the included longer screws, spacers, and mounting style meant I didn’t have to do that with this mount.
Also haven’t been using the locking bar so I can easily tilt the monitor to access the ports underneath, it stays very steady while I’m doing that.
While I really wanted my TV as close to the wall as possible, I don’t think I realized just HOW slim this mount was. The TV looked great, but I hadn’t considered my power and AV cables, sticking out from the plate I had purchased.
There just wouldn’t have been room, or the cables would have been bent at an alarming angle. My solution was to return the flush-mount plate and look at the recessed-wall options, that gave me some more room for cabling.
The mount itself is amazing. Made from sturdy materials (the locking bar is genius) and all the hardware is included for every kind of TV, spacers and different kinds of fasteners. Installation was easy and left me confident in the security of the installation.
Something anyone who has hung an expensive TV wants. I received this product in exchange for an unbiased review.
This is a perfect simple design low profile mount for your TV. This is great for a TV that needs to be in a fixed position. This mean the mount is not flexible and is designed for simple use. For this the design is great.
The materials appear to be sturdy the parts all feel secure and there is very little to say negative about this mount. This is ideal for a secured TV requiring anti theft in a commercial space however it was also perfect for the house my University aged daughter moved into.
We were able to put up the mount and secure it so the unit could not be messed with. For me this is a great thing. The low profile design keeps the Tv snug to the wall as I said before. Great design.
I received this product in exchange for an unbiased review.
The Peerless-AV Full-Motion Tilting Wall Mounts combine ease of installation with viewing flexibility. With A6X4, extend the TV up to 14. 40″ (367mm) or fully-retract it to just 2. 75″ (70mm) from the wall for the optimum viewing angle.
The Hook-and-Hang system offers easy, one-person installation of the TV. The tilt is easily adjusted +12 /-3 with the included wrench, reducing glare and optimizing the viewing angle. With the cable management feature, cables can be routed and secured for a clean and clutter-free look.
I bought this specifically for the tilt feature. Once installed the only way to adjust the tilt beside moving it while it’s tightened this wearing out the screws, or you have to buy a 3 ft long phillips to even reach it.
What’s the point? Also broke the fiber optic trying to place it into back of tv while on the wall. Barely moved away from the wall even though its a tilt and snapped the plug right off. I want to return this am am not looking forward to taking it all down etc! Better designs are not hard to implement by now people!.
Already opened box, missing some hardware, items loose in box, box not sealed nor taped, items out of their protective bags and plastic coverage. Item had been returned by a previous buyer and had not been inspected or properly repackaged.
120 cm long swivel arm / extendible / tilting / rotatable / swivelling / 180u00b0 / ud83dudd38 Max. Load: 40 kg / Package weight: 12. 3 kg u2606 u2606 u2606 The universal and stable wall mount is fully movable and flexible.
The TV mount is extendable up to 120 cm and can be easily rotated to the right and left. The swivel arm has 3 joints: on both sides of the arm (wall and TV) and in the middle. TV recommendation: approx.
42-75 inches (107-191 cm) / max. Load: 40 kg u2606 u2606 u2606 u2606 The extra strong wall mount is perfectly suitable for all standard TVs (normal, flat and curved) up to a TV weight of 40 kg. VESA: 100×100, 100×200, 200×100, 200×200, 200×300, 300×200, 300×300, 400×200, 400×300, 400x400mm, plus other VESA dimensions.
Very large wall distance: 11. 4 – 120 cm u2606 u2606 u2606 u2606 You can easily move the wall mount freely to any position. Space-saving when folded together on the wall at a distance of approx. 11. 4 cm or extended up to 120 cm into the room.
For your comfort, the wall mount can be freely rotated up to 180u00b0 to achieve the best angle for you. Easy to install: a drilling template makes installation easier. Included is standard mounting material for the TV and for a normal stone wall.
Velcro cable ties fix the TV cable. With this purchase, you are purchasing a strong, durable and secure wall bracket for years to come.
The best TV mounts for a 75 inch TV are the ones that are specifically designed for that size television. There are a few different brands that make mounts for this size TV, so it is important to do some research to find the best one for your needs.
The most important thing to consider when choosing a mount is the weight capacity. Make sure to choose a mount that is rated for the weight of your TV. Another important consideration is the type of mount.
There are fixed mounts, tilt mounts, and full motion mounts. Each type has its own advantages and disadvantages, so it is important to choose the one that best fits your needs. Fixed mounts are the most affordable and are great for televisions that will be mounted in a fixed location, such as above a fireplace.
Tilt mounts allow you to tilt the television up or down, which is great for avoiding glare. Full motion mounts are the most expensive, but they allow you to swivel the television left or right, as well as tilt it up or down.
Gems for rapier new world is a game that was released in 2017. It is a rhythm game that uses your phone’s microphone to detect when you tap on the screen. The faster you tap, the more points you get. There are three difficulties to choose from, and you can play against friends or strangers…
Hair rollers are often used to curl or wave short hair. The roller is wound around a section of hair, and then the hair is heated with a blow dryer or curling iron. This creates a curl or wave in the hair. 20 Best Hair Rollers For Short Hair 1. T3 Volumizing Hot Rollers Luxe…
An automatic bilge pump for a boat is a device that is used to remove water that has accumulated in the bilge of the boat. The bilge is the area of the boat where the hull and the deck meet. The bilge is where water can accumulate if the boat starts to take on water….
The Chevrolet 400 small block engine was produced from 1970 until 1980 and was Chevy’s small block V8 until the introduction of the Chevy 305 engine in 1976. The 400 engine was available in a wide variety of vehicles including the Camaro, Corvette, Nova, and Chevelle. The 400 small block engine was produced with a…
A solar charge controller inverter is a device that helps you to use solar power more effectively. It is a solar power converter that can be used to convert the DC power generated by your solar panels into AC power, which can then be used to run your appliances. The inverter also has a built-in…
Card making kits for adults are usually made up of a set of materials that allow you to create beautiful, handmade cards. The kits will often include a selection of patterned papers, cardstock, envelopes, and embellishments, as well as a step-by-step guide to help you create your own unique cards. 10 Best Card Making Kits…