It has a 1500 pound capacity, a corrosion resistant zinc plated finish and also provides 12 of screw travel and up to 27″ of lift. It offers the industrys strongest bolt-thru swivel mount system. This new mounting system eliminates the snap ring and produces less deflection under load and during operation than other bolt thru designs.
It has the Fulton patented expanded head tube design which allows for a larger, heavy duty gear set. Mounting hardware fits up to 3″ x 5″ trailer tongues.
The media could not be loaded. For some reason the screws on the bottom don’t meet up to the tongue of the trailer but it’s still a perfect fit. No issues so far, works great. super easy install. I had 7yr old daughter hold it for me while I tighten up the screws one by one.
This unit is on a small boat so weight was not a factor. The unit is well built and easy to install. I put it on a 3 inch frame but it looks like it will go up one size and down one. I just bought the boat and can’t believe the last owner was so cheap not to install one.
I have owned at least 10 boats and unless you are trying out for clown of the year you need one. The boat rolls around nice even in dirt with the caster size. I am not sure on the gauge of metal put it is 3 times what my boat needs.
It has a nice finish and it locks securely in place when going down the road. If you have a big double axle boat you might want to go to some real heavy duty lander, but this one is pretty solid.
This 4 ton capacity bottle jack has a heat treated extension screw that allows low pickup height adjustment and maximum lift height. It has a serrated, heat treated saddle that provides a generous lifting area and a secure grip.
The base is wide and rugged for both stability and strength.
Sometimes you just need a little Jack, this jack is rated at 1 to 2 tons and is nice and compact. The action is smooth much better than other small jacks I’ve used over the years. Sometimes you just need a small jack on smaller cars are for other projects what do you need a little extra lifting effort and would be good for lawn tractors.
The piston is 6 inches long fully extend it and you get another inch and a half by unscrewing the extension on the top which has a nice knurled finish for support. The base seems a little small for the length of the wall extend the base is 3 inches square with good solid steel.
The handle could be improved seems a bit sloppy and poorly made. When releasing the pressure for the jack to come down it’s a nice smooth motion and the valve to turn moves freely and smoothly in both directions.
XLT Swing Away Bolt-On Jack with 12″ travel & 8″ poly Wheel. It weighs 1500 lbs and features true turn 360° TM for best in class castering performance and a high-performance Sharkskin TM finish for outstanding corrosion resistance.
Raises and lowers 35% faster than conventional jacks, with a soft touch grip for increased comfort.
One side wind, bolt-on trailer jack, mounting hardware
Limited 5 Year
Reviews From Real Customers
This replaced an original boat jack that was flimsy at best. Once I got the new one on it was simply amazing how easy it is to move the boat around now. It is rugged and makes it easy to move the boat by hand, even on the unpaved area of the driveway.
This is a back saver, thanks for a great product. Randy.
This swing away jack replaces a Reese jack which is a poorly designed product. The most salient features of the Fulton jack is the wheel pivot and swing away designs which are faraway superior to the Reese.
My jack on my bass boat was becoming very hard to use. I replaced it with this Fulton jack. All I can say this works extremely well. There is not effort to crank the jack. The only issue I had was removing the old one which was on a weld fitting with a C ring.
I did have to drill 2 wholes in the frame for the new jack but that was not a problem. I am 77 years old and can turn this hack with one finger. Best purchase I have made in a long time.
Lift height of 4-1/4 in. to 20-1/4 in. , ideal for low-profile vehicles to trucks and SUVs Lift capacity of up to 4 ton Dual piston hydraulic system Ball bearing premium rear swivel casters for 360 mobility Rotating, removable jack saddle adapts quickly to lift accessories This heavy duty 4 ton car jack has a lift range from 4-1/4 in.
to 20-1/4 in. to get most vehicles almost two feet off the ground. Dual piston Rapid Pump technology lifts most work loads in just 3-1/2 pumps.
Bought this to assist in installation of my Moryde CRE 3000 suspension upgrade on my 2020 Grand Design Imagine 2600RB. RV Weighing in at 8000 lbs the Daytona floor jack took on this challenge and smoothly and effortlessly lifted the entire trailer allowing all four wheels to be lifted off the ground and supported on 4- 6 ton jack stands.
Daytona lives up to its name with high performance engineering and great design and good looks which comes in colors to choose! There are no sharp corners to catch items as you move floor jack to position it under the load.
The double piston design operates the jack rapidly to the surface to be lifted then gives the hydraulic power to lift up to a 4 ton load in a controlled fashion (proven). The handle operates up and down control by operator rotation and works smoothly allowing precise control of the load being lowered.
The design includes a cushioned area on the handle which would most likely strike objects while moving the jack and gives the operator a cushioned grip if operating it from the floor position. This is the best floor jack you could have in your shop!.
I love the jacks safety feature on the handle. This jack is light weight for the size. I’ve owned several major tool manufacturers Jacks but none compare to this jack. I also recently purchased an additional add on that makes this really versatile in the garage.
It’s maneuverability is even quite smooth on rough stone or finished concrete surfaces this jack was built to get the job done. the rapid pump feature is not like your daddy’s jack this is a great product at a fraction of the price compared to major tool dealers and company’s.
Thank you Harbor Freight for making affordable quality Tools for different skilled trades we can’t wait to order a few more.
I bought the 4 Ton jack for myself, but bought this 3 Ton as a gift. It’s the same brand and works the same and I love mine! Gets the job done without any worries, solid and strong. Very heavy (don’t have concrete surface like most), but easy to pull around.
Solid metal wheels and coated to keep protected for years. Keep your hydraulic oil handy and do your maintenance and will last forever! (Used many times and haven’t needed to fill reservoir yet. ) *If you don’t top it, you may loose the power to lift and your vehicle will lower on you, FYI.
(This has not happened, but has with a little hydrolic jack. kind you could use for a lawn tractor. ).
The industrys highest capacity swivel mount caster jack. The XP15L has a 1500 pound capacity, a corrosion resistant zinc plated finish and also provides 12 of screw travel and up to 27 of lift. The XP15L offers the industrys strongest bolt-thru swivel mount system.
This new mounting system eliminates the snap ring and produces less deflection under load and during operation than other bolt thru designs. It has the Fulton patented expanded head tube design which allows for a larger, heavy duty gear set.
The 8 stylized caster and heavy duty yoke allow for easy castering under load. Mounting hardware fits up to 3 X 5 trailer tongues. This jack couples the features of our standard XP15 with two additional inches of screw travel.
The result is a bolt thru swivel mount jack for vehicles with higher hitch platforms.
This pair of scissor jacks can be either bolted or welded to the frame of your trailer or RV. Worm-gear mechanisms won’t slip. Oversize footplates help to eliminate sinking and tilting. Features: Scissor jacks raise and stabilize 5th-wheel, travel, horse and cargo trailers Heavy-duty worm-gear jacking mechanisms prevent slippage Perfect for stabilizing loads Large footplates provide excellent stability Bolt-on or weld-on installation (2) 3″ Wide x 10″ long mounting plates have multiple holes to fit most applications Mounting hardware not included (3/8″ bolt is recommended) E-Z crank handle included Sturdy steel construction Black powder coat finish resists corrosion Specs: Quantity: 2 jacks Lift: 24″ Collapsed height: 4.
75″ Collapsed length: 26″ Support capacity per jack: 6,500 lbs Combined support capacity: 13,000 lbs Footplate dimensions: 4. 5″ wide x 9″ long Mounting plates: 3. 5″ x 7. 25″ Lifetime warranty Note: These jacks are designed to stabilize a portion of your trailer’s weight, not to support the full GVWR of your trailer.
Do not use these jacks to lift your trailer or RV. Doing so will exceed the capacity of these jacks. 48-979002 UltraFab Scissor Jacks – 24″ – 2 Pack.
The Ultra scissor jack is advertised as a heavy duty upgrade and is priced higher than many of the alternatives. I was disappointed the metal construction was no heavier than the OEM jacks I replaced.
Two of the four jacks have slightly bent threaded shafts which makes them wobble and rattle loudly when using a small hand drill to raise and lower them. I would have returned them for a different product if they didn’t get roadway paint splattered on them during the first use.
Also, the threaded shaft extends both to the inside and outside when the jacks are lowered. This means when parked you will have a long bolt sticking out from the side of the jack body that will be a trip hazard at shin height.
I use these on my Class C RV. The jacks’ 24-inch full extension is a real plus over the car scissor jacks I had been using, which are too short and need additional pieces of wood to make up for the needed inches.
The crank, however, is too flimsy; it requires a lot of torque (muscle) to lift the RV even slightly. So, as stabilizers, the jacks work well, but not so much as levelers.
BEWARE! These are pretty low quality. For one thing the jacks extend using counterclockwise turns rather than clockwise like every other jack on my trailer or I have seen. And when you’re raising or lowering the shafts are bent so the drill vibrates out of your hand.
I wish I had spent a little more and gotten a better product.
Eaz-Lift’s Olympian 24″ Scissor Jacks fit pop-ups and trailers and allow for either bolt-on or weld-on installation. It has a certified 5000 lb. load capacity and is powder coated for maximum rust protection.
Measures 4-3/8? high when fully collapsed and 23-3/4? when fully extended.
Very happy with the quality specially compared to what was on my Travel Trailer. Ive attached picture. I paid a little extra to get American made, my only issues was I had to make a run to get hardware to get a socket to fit the screws, and the holes didnt line up on both sides, so I had to buy a new drill bit, I have a box of probably 45 bits but none the right size for this.
Also buy the time I got to drilling the last hole the bit seemed to have worn out and didnt want to go through. I happened to be near the gas line, so I had to be extra careful I didnt push through too far.
These are far superior to the factory tin foil jacks. However, both of my Eaz-Lift jacks are sooooo smooth, that they will extend out while I am towing the trailer down the road. Luckily, on the 2 trips, I found the issue, before the pavement could rip it off of the trailer frame.
My fix was to bungee strap these jacks in a closed position. YES – BOTH jacks. Both jacks are so loose that my kid can turn the nut with his hand to make it extend. Which brings the next issue. Since these are so loose, when it comes time to break down the camper, they let loose so fast, it’s like lowering a NASCAR right after a 4 second tire change.
Great replacement. I replaced one of my back jacks that I bent during a deer hunt driving off road. The installation was very easy, however, I used the old bracket from my bent jack that was already welded to the frame of my trailer.
I just unbolted the old one, bent the bracket back the way it was supposed to be and then bolted this one back on. It probably only took me 15 minutes or so. One thing to note is that this jack moves a lot faster than my old jacks.
The threads on the “screw” rod are farther apart so each revolution puts out more movement. This is nice when you have to lower or raise it a lot, but I’ve noticed that it requires more torque than the old ones to get a lot of weight on the jack to stabilize my trailer.
Torin jacks, stands and accessories can lift almost anything that you have in your garage, including cars, machines and other heavy objects. Torin is the largest manufacturer of hydraulic jacks and tool boxes in the world.
All Torin products are manufactured to the highest standards and will outlast the competition. Trust Torin for All our handling needs. Perfect fit and finish every time.
Overall its a good jack the handle does come apart very easily and can be frustrating at some times , wish it would hold together better, maybe a little clip would be a good addition. Additionally the pressure release valve is not so good.
wish that it was a better design , maybe a 6 point or square (inverted square) would be a better design to make releasing pressure easier to use. Also a little carrying case would have been nice , since the handle is bound to get lost in the future.
Only issue I’ve had is the neck doesn’t like to retract. It releases and drop under load correctly but it doesn’t continue all the way down. So it is still “ filling the void” between whatever you are lifting and the ground.
I ended up having to return this jack the same day I purchased it. It would jack up, but would not come back down. I thought it was something I was doing incorrectly, but the guys at the store couldn’t get it down either.
The Big Red 30-Ton Bottle Jack is designed to easily lift loads up to 30 tons. It is crafted with heavy-duty steel to help ensure strength and has a heat-treated saddle for safety. The jack meets ANSI standards and is 100% factory tested for reliability.
We usually use roll out jacks rated for 20 tons on our semi trucks and they last anywhere from 2 years to about 5 years. Picked these up just in case we needed a 50 ton jack but just by using them about 10 times over the course of two years we ended up having one fail on us.
The others is still going but I doubt it’ll last any longer. Still not too bad for the price if u are on a budget as alot of 20 ton rollout Jacks are more expensive but not a good investment for the long terms or if u intend on using it extensively.
We bought this to push out some broken spindles on our manure tanker. It is extremely heavy and well built. We were pulling for all we were worth and even had to go to a solid handle cause we were nearly bending it.
It got them out. When it felt like the 50 ton was hardly working at all cause it was moving easier we switched to the 20t and the smaller jack could still hardly move it. We had built a frame for the project and had to about double the strength of it cause the jack was so strong it easily bent it.
Again a great product for a great price!!! It does work on its side just like a normal bottle jack as long as the handle/pump assembly is down.
The Astro Pneumatic 5304A 20 Ton Low Profile Air/Manual Bottle Jack is designed for operating either manually or pneumatically. The air hose can swivel in any direction of connection from the air source.
This item is fitted with a safety valve to prevent against overloading, and the extension screw gives added height when needed. This item is speedy and versatile, and since it is a hydraulic bottle jack, it is far quicker than using conventional hand operated equipment.
It is also much safer since air power permits one-handed operation and enables the user to watch the load more closely. The heavy duty design makes this item ideal for a wide variety of automotive, truck, industrial, and construction work.
MaxxHaul Towing Product 70149 11-1/2 inch lift swing back trailer jack with dual wheels are perfect for all your recreational, marine and farming applications. Heavy duty zinc plate or powder coat finish insures durability against the elements.
Spring loaded handle lets you easily swing jack up for travel and down for use.
NOTE! Picture #1 is different from what’s in the box. The remaining pictures are correct which is the replacement I needed. The box has the same picture as #1 which is wrong also. The box and Picture #1 have a different handle (no big deal).
But the retaining pin at the pivot joint is actually a heavy duty two pin “U-Bolt” type and Picture #1 and box show a lightweight single pin. I was relieved to get what I needed.
I made this work on my A-frame angle iron trailer tongue. I really like the double Wheels with double Forks. Swing away so I can drop my tailgate while the trailer is hooked to the truck. Works perfect so far, I would recommend.
The round jacks are recognized as the industry standard by leading agricultrual, commercial, horse, livestock, and other trailer manufacturers. For more than three quarters of a centruy, BULLDOG jacks have been demonstrated to be the most reliable, field-proven jacks on the market.
High performance side wind marine & recreational jack – 12. 75″ retracted – 2. 75″ extended – 10. 5″ clearance – Zinc with 6″ caster.
Had it for one year, very light use. perhaps moved around and folded up a couple dozens times. Went to take the trailer out and the wheel wouldn’t swivel. Was fine a few days before. Then found the gears essentially locked.
Well greased, nothing looked bent, no rust, no visible damage on the outside or what I can see of the gears, but she’s seized tight. Can’t take it apart because I can’t move the handle to take initial pin out.
Sledge hammer time, then to buy something else. Likely from Princess Auto.
I liked the Motomaster one for it’s double latch. but the wheel on this one is bigger and to me that is more important. Price is about the same, and you can’t go wrong with Reese brand. Fits well on the Stirling 5×7 Utility trailer.
Only concern is that the handle just hangs down when the jack is in the folded position. Hasn’t been a problem yet but might need to somehow keep it from hanging down and possibly scraping the ground.
Have a 14 ft Aluminum boat, 10hp outboard. Orig. 2006 wheeled jack wrkd, but crank handle rotted out n internal gears shot. Looked at many replacements online and didn’t wnt to take the chance on any of those jacks in the $20-40 range as reviews reflected poor build quality.
This cost me $60 and so far it appears to be a fair price. Granted, i’ll never come close to the max tongue weight, but i certainly do push this trailer around after unhitching from the Truck. The build is heavy all around.
The entire area around the wheel as well. I swing my trailer bk n frth as i push from driveway to my yard whr i park the boat. Wheel is plastic, but appears thick enough to hold up. (I saved old plastic wheel jst in case, beat up but will still roll jst fine).
Before first use, i made sure to pop off top cap and liberally lube gears with Johnson Tripple Guard Grease!! As well as the crank handle and wheel assembly. I will update if hv issues.
Nobody wants their boat or utility trailer rolling off into the sunset. With the Bulldog Powered A-Frame Trailer Jack, your receiver-style trailer will stay grounded when it’s not in use. With a 4,000-pound lift capacity, this electric trailer jack can be used for a variety of agricultural and commercial applications.
The innovative design allows the trailer jack to be quickly positions with 22 inches of total travel. Maintain clear vision when the sun goes down with the onboard LED courtesy light that’s angled to illuminate your coupler.
In case of power loss, there is an emergency manual override feature and crank included so you are able to still utilize your jack. Crafted from heavy-duty materials, Bulldog Powered Drive Tongue A-Frame Trailer Jack is known for its unmatched strength, durability, and sideload capacity.
Whatever receiver style trailer you own, put your mind at ease with a powered jack that keeps your trailer put when not in use.
Love this jack. The spring loaded pull-pin to drop the leg is a HUGE plus. No more lost lynch pins. The jack is smooth, quiet, and powerful. The only minor issue was the size of the jack’s head. It interfered with the LP tank cover and I had to move the LP tank tray back about 2 inches.
But this jack is so good I consider that a minor inconvenience.
Great tongue jack, five year warranty, heavy duty construction, and the best range of extension of all the brands. Really can get your trailer level at the most unlevel campsites. This is our second Bulldog 4000, and can highly recommend it!.
Features and Benefits: 40,000 lb capacity Lift range: 7-1/4″ to 13-3/4″ Steel lifting saddle grooved for load gripping power Folding handle for easy transport Patented bypass device protects against over pumping.
Heat treated critical stress areas ensure long life performance. Adjustable top screw to accommodate work heights.
I read all the instructions thoroughly before starting. Straight out of the box, it wouldn’t jack up my vehicle high enough to remove the flat, let alone mount the spare. Ran through the guidelines for this problem, found it was low on hydraulic oil.
Would’ve been nice to have a small amount included in the box if they weren’t going to fill it at the factory, or at least have a note somewhere suggesting to get some with my purchase. Oh well, some people have it on hand already, so I went back to the store to buy hydraulic oil.
Filled it properly (level with the oil plug) and it still wouldn’t extend high enough. Ran through more guidelines and more practices for addressing another possible problem (purging air from the ram, which I did four times) and it still wouldn’t extend to its max height (16+ inches), which means I couldn’t change my tire.
I now have to go to the store a third time to return it, then turn around and shop for another because my tire is still flat. Waste of my time, money and effort. Also, waste of resources manufacturing this glorified paper weight.
If you know what a bottle jack is for, then you know it’s not made to give you the height of a floor jack. A bottle jack is not made for a tall lift that’s why it works to lift 12,000 lbs in such a small package.
I got this to keep on my 12,000 lbs fifth wheel camper. I’ve used it a few times to change tires. I keep a few short pieces of 2X6 in the storage compartment for use with this jack. Even if it went up high enough, you still need a larger footprint to keep it from sinking into the ground in the event you had to use it on something other than a hard surface.
Obviously the negative commenters really don’t know how to use this style of jack. Buy with confidence!.
Gives you more holding power works easier than ever. Works on all surfaces and most trailer axles (round or square) from 10″-15″ wheels. To use, just place the jack under the axle and drive forward or reverse a few inches automatically raises the trailer to the proper height for changing tires, lubricating or replacing wheel bearings, etc.
Two ton capacity, high strength aluminum construction.
I have two boat trailers. It works great on the one with lower axels. Put it on the axel, pull forward a little and it rolls right up. Quick and easy. It does not have enough clearance for the other trailer to get the tire high enough to change it.
Fulton Bolt Thru Swivel Jacks feature swing-away design, with bolt thru mounting. Heavy duty steel construction with a zinc finish for corrosion resistance. 10 inch of travel with 6 inch poly wheel. If you receive an item that has been damaged in transit, you may return it for a replacement, exchange, or refund.
This was a great purchase. So far it works great. Smooth operation, fairly quick to lower and raise with a comfortable handle right out of the box. Came with all mounting hardware, which the description probably said, and I assumed, but the winch I also bought with it didn’t come with any hardware so I was worried.
Installed easy on 16′ Continental trailer. Helps me move a 14′ Panga around easily and attach a hitch solo now. Will update the review if it seems to corrode quicker than acceptable.
I had bought one at Cabelas but it sucked so I returned it and got this one. My friend installed it. If you extend it all the way and push the boat I feel like it will bend and go out of alignment so I am careful to have the boat at a low angle if I am going to push it.
I have to have it fully extended plus some to get onto my hitch so I have to do a little more work than usual to hook up. I could change the hitch but it’s set for another trailer and rv. Good value.
This Strongway 20-Ton Hydraulic Low-Profile Bottle Jack is ideal for low profile requirements where normal bottle jacks just won’t fit. Designed for vertical lifting requirements in automotive and ag repair shops, on loading docks, in industrial environments, on factory floors and more.
Not for use where sideways or downward force is required. Meets ASME PALD 2009 standard. , Constructed of high-grade steel and built to exacting standards for quality and durability Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust Paint is oil, grease and dirt-resistant for easy cleanup High-quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to raise the load, helping to reduce wear and extend service life Piston-ram is treated and polished to resist skiving Piston-ram utilizes a Y-Style polyurethane sealing ring with backup ring, preventing load from falling slowly or bypassing oil drift Hydraulic pump is constructed of QT450 Nodular Iron which has a higher strength than other types of iron resulting in greater durability Hydraulics are powered with a high quality oil, which offers better corrosion resistance and high/low temperature flexibility, allowing the unit to operate at temperatures between 40 degrees F and 105 degrees F Knurled heat-treated pad with 1 1/4in.
screw adjustment for versatility Lifting handle is sectional and connects quickly making storage easier Convenient steel carrying handle makes it easy to transport the jack Wide base adds stability Built in ISO certified facilities and engineered using the same systems as Aerospace Technologies and the Automotive OEM sector Meets ASME PALD 2009 standard Model Number: NT92007A.
I bought this jack for my 4WD. I needed a jack that was short enough to fit under the axle when the tire is flat, yet lifts high enough to be able to mount a fully inflated 37″ spare tire. This jack has the required specs for that job.
Unfortunately, after a few years of storage, it fails just when I needed it! The ram would raise SLOWLY and finally contact the axle, but after that it would not lift. I tried everything, including the proper bleeding/air purging, and still nothing.
Another issue is that the rams are rusting. They have a rough machined finish rather than the expected ground finish, and they arent plated or otherwise treated for corrosion resistance. I could Scotch-Brite the rust off and oil the rams monthly, but that’s a PITA and shouldnt be necessary.
In any case, since it no longer works it’s a moot point. After some research I found that it’s common for Chinese jacks to have failure rates as high as 40%, and even if they do work they tend to be short lived.
Even when they’re not used. Forget Chinese hydraulic jacks. Get either a US made or Japanese made unit. US Jack is expensive, but they are THE best! And if they ever need servicing, all parts are available for a reasonable price.
Not that they will ever need parts unless they are being used continuously12hrs a day for years. You can find used ones for a decent price if you look around, and because they are so well built they are very unlikely to have any problems.
The other option are Japanese-made jacks sold by Norco and others. They are welded units, and so are not repairable, but like the US Jacks they are very unlikely to ever fail in the first place. While neither the US or Japanese jacks are available with telescoping rams, that feature does little good when the Chinese junk doesnt work when its needed! Get a jack just low enough to fit under the axle or a-arm with a flat, and carry a suitable jack stand and a block or ram extender for extra height.
That way, you can raise the vehicle, put it on the jack stand, then use the block under the jack or extension on the ram to lift the vehicle high enough to get the inflated spare on. Yeah, it’s a bit more work than using a telescoping ram jack, but at least it wont fail and leave you sitting on the side of the road!.
I have purged the air out of it. Then I fully extended/retracted it. Worked great but I haven’t put any load on it yet. In the pictures, one pic is the stroke of the rams and the other pic is how I found it when I opened the shipping package.
As with other reviews on this jack, it could use an attached handle.
Sturdy steel construction6000 pounds load capacityAdjustable from 16″to 30″Powder coated for maximum rust protectionSet of 2The Eaz-Lift Telescopic Jack has a zinc-plated inner tube and screw assembly.
It is adjustable from 16″to 30″. Its sturdy steel construction and powder coat for maximum rust protection has a certified 6000 pounds load capacity. It comes in a set of two.
I just received theses and have not actually set the trailer up using them. They seem to be a high quality strong jack. I have a fifth wheel camper which sits higher off the ground than a regular travel trailer and these will definitely save me time on the setup.
Since I have not actually used them yet I could not give them a 5 star but I think I will be very pleased.
Would have gave a 5 star but box came damaged and the paint on the jacks were messed up a little. It does not stop them from working, they work great on my 5th wheel. This the 2nd set I bought of these jacks.
W/footplate; features: weld-on jackpro series offers the best values and is one of the widest product lines in the towing marketing. A diverse selection of products including fifth wheels, goosenecks, weight distribution systems, receiver hitches, jacks, couples, winches, trailer brake controls, trailer breakaway systems, and cargo management are just a few of the items available.
The pro series product line is made by the best names in the industry and strikes a balance between high performance and low price. When shopping for your next trailer product or camping accessory, remember that pro series is the product line that provides legendary value.
What a deal, I am very happy with this one and am sure I could use this type on many other trailers. No hardware came with it but I had to pick up the square bolts at my local auto parts store to fit my trailer anyway.
Trailer Helper tire jack is steel powder coated gray with a diamond plate finish. The Trailer Helper offers a safe and quick alternative to changing a flat tire on most tandem axle trailers. This medium duty jack is intended for use on two, three, and four horse trailers.
The built in carrying handle makes transferal easy.
I bought one of these for my dad with his food trailer a few years ago and it’s been one of the best buys I ever made. Being metal it’s heavy duty and will last for a long time. We use this to stabilize the jack on the trailer when it’s detached and just throw it in the bed of the truck when we roll.
Stays outside 24/7 and shows little wear. Takes the pain out of getting a flat tire. Recently bought a new horse trailer so I bought a second one to keep with it. Highly recommend!.
a must have for my lq trailer. sturdy, tho heavy, but has to be for this job. I had a plastic one for twenty years, and was great for smaller trailer, but definitely not trustworthy for big trailer. Would not leave town without one.
The conclusion of the jack for the RV tire change is that it is a very simple process that can be done by anyone. It is important to make sure that the jack is in the correct position before starting to change the tire.
Once the jack is in place, it is simply a matter of raising the RV up so that the tire can be changed.
Some possible armor choices for a confessor elden ring could include items such as a helmet to protect the head, a breastplate or other type of torso armor, gauntlets or other types of hand protection, leggings or other types of leg armor, and boots. In addition, a confessor elden ring may also choose to wear…
Bait for dog proof traps is any type of food that will attract dogs. This can include meat, bones, cheese, or even dog food. The bait should be placed in the back of the trap so that the dog has to step on the trigger plate to reach it. 20 Best Bait For Dog Proof…
The main purpose of boat bottom paint is to reduce the friction between the hull and the water. This can help to increase the speed of the boat, as well as improve fuel efficiency. Additionally, bottom paint can help to protect the hull from barnacles and other marine growth. 20 Best Boat Bottom Paint For…
Base makeup for over 50 should be light and natural looking. It should even out the skin tone and cover any blemishes or age spots. A foundation with SPF is a good idea to protect the skin from the sun’s damaging rays. A light dusting of powder can set the makeup and help it last…
A canopy is a type of shelter that is typically made from waterproof fabric and is supported by one or more poles. Canopies can be used for a variety of purposes, including providing protection from the sun, rain, and wind. Canopies are often used at outdoor events, such as weddings, parties, and festivals. 20 Best…
A barrier cream for moisture lesions is a type of cream that is used to treat sores or wounds that are infected or at risk of infection. The cream works by creating a barrier between the wound and the outside world, which helps to keep the wound moist and protected. This can help to speed…