Social Moms

Best Double Sided Tape For Led Strip Lights (2023 Updated)

When you shop through links on our site, we may earn an affiliate commission. This educational content is not intended to be a substitute for professional advice.

When you’re looking for double sided tape for LED strip lights, there are a few key points you should consider. First, you’ll want to make sure the tape you choose is strong and durable enough to hold the LED strip lights in place. Second, you’ll want to make sure the tape is temperature resistant so it won’t become brittle over time. Third, you’ll want to make sure the tape is strong enough to hold the LED strip lights in place for a long time. Fourth, you’ll want to make sure the tape is designed for use with LED strip lights, as some tapes may not be suitable. Finally, you’ll want to make sure the tape is easy to use and won’t leave any residue on the LED strip lights.

When looking for double sided tape for LED strip lights, it’s important to choose the right tape for your needs. Strong and durable tapes are essential to keep the LED strip lights securely in place, while temperature resistant tapes will make sure they stay in place even in extreme temperatures. It’s also important to make sure the tape is designed specifically for use with LED strip lights to avoid any issues. Finally, you’ll want to make sure the tape is easy to use and won’t leave any residue on the LED strip lights.

In conclusion, if you’re looking for double sided tape for LED strip lights, make sure to consider the five key points mentioned above. Make sure the tape is strong and durable, temperature resistant, designed for LED strip lights, and easy to use. By taking these points into consideration when shopping for double sided tape for LED strip lights, you can be sure you’ll get the best tape for your needs.

10 Best Double Sided Tape For Led Strip Lights

1. 10m X 10mm Double-Sided Mounting Tape – Acrylic Adhesive, Heat Resistant, Weatherproof.

This 33ft Clear Mounting Tape is the perfect choice for those looking for a reliable adhesive that can be used in a variety of applications. This high performance adhesive features a strong acrylic adhesive on both sides of the tape for maximum holding power. It is weatherproof, heat resistant and can be used both indoors and outdoors.

Measuring 0.4in (10mm) wide and 11 yards long, this double sided foam tape can be used to securely and rigidly attach items without the need for screws, nails, or bolts. It is suitable for mounting kitchen and bathroom accessories, decors, automotive exterior and interior trim, and is perfect for projects where typical fasteners won’t work and you need a clear finish.

This clear mounting tape is designed to adhere to most surfaces without leaving any messy residues, and its high initial bonding strength can make it a permanent bond. It can be used on wood, metal, concrete, bricks, and plastic. Its high temperature resistance makes it ideal for mounting LED aluminum channels and LED strip lights.

This 33ft Clear Mounting Tape is an excellent choice for those looking for an invisible and removable adhesive that can securely and rigidly hold items, both indoors and outdoors. With its strong acrylic adhesive and high temperature resistance, this tape is sure to get the job done.

2. 3m Double Sided Mounting Tape, Heavy Duty Adhesive, Foam Tape, Led Strip Lights.

This product is a 108 Ft Double Sided Tape, with a thickness of 0.03Inch/0.7mm, a width of 0.39 Inch/10mm and a length of 33M/108 Ft. It is designed to provide heavy duty mounting adhesive, making it an ideal choice for permanent fastening solutions.

The tape is composed of a durable acrylic adhesive with viscoelastic properties, making it suitable for most surfaces and allowing it to handle “harsh heat”. It is easy to install, simply peel off and stick to the surface of the object. It can also be repositioned if it is not fully compressed, without affecting the adhesion durability.

This product can be used for a variety of applications, including heat insulation, connection, bundling, amendment, sealing and signs, as well as the processing and assembly of electronic and digital products, home appliances, advertisement boards, LED plates, moldings, door edges, body side moldings, stainless steel, ABS and PVC rocker panels, wheel lips, nameplates and decoration bars for automobiles.

The tape is clear and removable, allowing it to be removed slowly without leaving sticky residue or peeling off the surface coating. It is an ideal choice for indoor and outdoor bonding applications, providing a simple and easy solution to replace liquid adhesives, rivets, spot welds, and other permanent fasteners.

3. Heavy Duty Double Sided Tape For Led Strip Lights (10mm X 164ft)

The 3M Double Sided Tape Mounting Tape Heavy Duty is the perfect choice for a variety of applications. This tape is 164 feet long and 0.4 inch wide, making it ideal for everything from LED strip lights to wall decorations. It features 90 pounds per inch of longitudinal strength, ensuring durability and reliability.

The tape is waterproof and consists of a durable acrylic adhesive with viscoelastic properties, making it suitable for most surfaces, including outdoor and damp locations. It can also handle “harsh heat”. Installation is easy and secure; simply tear off the tape and stick it to the surface of the object.

This double sided tape is perfect for a wide range of projects, including signs, nameplates, wall hooks, scrapbooking, cards making, carpet fixing, wall decor, and posters/picture frame hanging. It can also be used for automotive displays and personalized cars.

The 3M Double Sided Tape Mounting Tape Heavy Duty is strong and secure and can be used on smooth and clean surfaces such as glass, metal, plastic, tile, wood, marble and more. However, it is not suggested for wallpaper, fabrics, textured walls, brick, and other rough or non-stick surfaces.

For a heavy duty, reliable tape that is perfect for a wide range of applications, the 3M Double Sided Tape Mounting Tape Heavy Duty is the ideal solution. With its strong adhesive, waterproof capabilities, and easy installation, it’s sure to meet all of your needs.

4. Heavy Duty Double-Sided Tape For Led Strip Lights, 0.4in X 32ft

The CANOPUS Double Sided Tape is a heavy duty adhesive tape that is ideal for mounting LED strip lights. It comes with a total length of 32 feet and a width of 0.4 inches, making it suitable for a variety of projects, both indoors and outdoors. This remarkable tape also has a thickness of 0.03 inches and includes 1 box cutter and 2 razor replacement pieces, making installation of LED strip lights simple and easy.

The CANOPUS Double Sided Tape is an excellent choice for mounting LED strip lights. It has a removable double sided wall adhesive tape that easily sticks to any surface and is suitable for almost all LED lights strips. This tape also removes without leaving any residue and does not peel off the surface coating. In addition, this remarkable tape has two different adhesives, one on each side of the tape, for effective bonding. It also has a good conformability and excellent plasticizer resistance.

The CANOPUS Double Sided Tape is suitable for most surfaces, including installation outdoors or in damp locations. It is waterproof and has an extensive range of uses, from attaching exterior trim and other parts to automotive clear coat systems. This tape is strong and reliable, making it ideal for attaching LED strip lights, as well as other home and office projects.

In conclusion, the CANOPUS Double Sided Tape is a reliable, heavy duty adhesive tape for mounting LED strip lights. It is waterproof, has two different adhesives, and is suitable for most surfaces. This tape is easy to install, removes without leaving any residue, and has an extensive range of uses. This remarkable tape is perfect for any home or office project.

5. Heavy-Duty Mounting Adhesive Foam Tape, 0.39 Inches X 108 Feet, Waterproof, For Led Strip Lights, Home, Office, Car.

This MYFAMIREA Double Sided Tape is a heavy-duty adhesive that is perfect for a variety of uses. With its 0.39 inch width and 108 feet length, this foam tape offers an impressive amount of coverage and bonding strength. It has a 0.03 inch thickness and is made with a durable acrylic adhesive that has viscoelastic properties. This flexible and extendable tape can replace mechanical fasteners like rivets, welding, and screws, and also liquid adhesives, making installation fast and easy.

No need for special tools or glue, this foam tape can be applied directly to surfaces for a secure bond. It is weatherproof, allowing it to be used indoors and outdoors for almost any purpose, from led strip lights to air cushion and motorcycle parts. This tape can also be used to hang signs, picture frames, and more. The adhesive is strong enough to hold objects securely and can be extended to suit any application.

The MYFAMIREA Double Sided Tape is a versatile adhesive that is perfect for a variety of projects. Its heavy-duty design and easy installation make it ideal for home decor, office decor, car decor, and more. With its strong bonding strength and flexible design, this foam tape is a great choice for any project.

6. Heavy Duty Mounting Tape – 36ft, 0.4in, Waterproof, Double Sided Foam Tape For Led Strip Lights, Home Decor, Office Decor

This Heavy Duty Tape is designed with industrial strength bonding, attaching and mounting in mind. It is ideal for mounting large and heavy tools, greenhouse tarps, teaching materials, posters and picture frames, and can help to avoid the need for drilling and welding.

Made from a pressure sensitive foam tape, it is perfect for bonding metals and other high energy materials, as well as smooth surfaces such as metal, glass, marble, plastic, tile, and wood. It is resistant to UV light, moisture, solvents, and chemicals, making it able to withstand extreme environments.

This versatile tape is perfect for home, office, and automotive decor, such as photo frames, bathroom racks, mirrors, metal mailboxes, LED lights, address plaques, office signs, car registration plates, and car holders.

To ensure the best results, it is important to follow the correct usage instructions. Firstly, the surface should be wiped with a 50:50 mixture of IPA and water, and kept clean and dry. The right size of tape should then be cut and applied to the surface, and a roll down force of at least 15 lbs should be applied with a roller over the entire area. The protective liner should then be removed, and the other surface should be applied with at least 15 lbs of pressure to ensure good contact between the tape and the substrate surface.

It should be noted that this tape is pressure-sensitive, and its stickiness will increase over time. Under 15 lbs of pressure, 50% will be achieved in 20 Minutes, 75% in 1 hour, and 100% in 24 hours. Initial tape application to surfaces at temperatures below 50°F (10°C) is not recommended. However, the already bonded finished surface has good temperature resistance.

7. Heavy Duty Waterproof Mounting Tape, 108ft X 0.39" X 0.03".

This Double Sided Tape Heavy Duty Waterproof Mounting Adhesive Tape Foam Tape is perfect for home decorations, office decorations, and a variety of painted surfaces. Made of exclusively developed acrylic foam, this structural strength is more than five times that of general foam. It adopts sealed foaming, and each bubble is independent of each other, so it can effectively block water vapor and achieve the effect of water tightness and air tightness.

Installation is quick and easy, and does not require gluing, heating, screwing, or damaging walls. Simply peel off the tape and stick it to the desired surface. The tape will bond securely and quickly when it's fully compressed, and it is also simple to remove, leaving no sticky residue or coating on the surface.

This tape is viscoelastic in nature, giving it energy absorbing and stress relieving features. It creates a permanent seal against water, moisture and more, reaching 50% of its bond strength in 20 minutes, 90% in 24 hours and 100% in 72 hours.

This Double Sided Tape Heavy Duty Waterproof Mounting Adhesive Tape Foam Tape is an ideal choice for any home or office decorating project, as it is easy to use, secure and reliable. With its excellent adhesive properties and water resistance, it will provide a secure, lasting bond that is perfect for any project.

8. Ac0400 Double-Sided Mounting Tape, 0.4" X 108ft.

LLPT Double Sided Tape Acrylic is an ideal mounting tape for various applications, providing a strong bond that can withstand moderate strength on smooth surfaces. It is safe for glass, metal, marble, tiles, trims, and moldings, as well as car registration plates, name plates, address plaques, signs, and car holders. The tape is also suitable for home appliance panel repair, screens, metal mailboxes, mirrors, and hangers. Additionally, it is suitable for holding servo, ESC, receivers, and electronics on vehicles, drones, quadcopters, and crafts.

The double-sided adhesive is rated to hold 5-20 pounds of mass weight per square inch, and the tape is weather-proof, making it suitable for outdoor use. The adhesive is designed to resist curling, making installation process fast and easy. The adhesive is also designed to resist extreme temperature, moisture, humidity, and UV exposure, as well as anti-dust and yellowing.

The tape is available in four sizes; 0.24, 0.4, 0.6, and 0.8 inch widths, with 108 feet of tape in total length per roll. For maximum bond strength, surfaces should be pre-treated with a 50:50 mixture of isopropyl alcohol and water. The ideal temperature for tape application is between 70° and 100°F (21° and 38°C), and the bond should be allowed to dwell for 72 hours.

LLPT Double Sided Tape Acrylic is perfect for a variety of projects, including project photo walls, nail beauty, crafts, chunlian, card teaching, and more. It is affordable and cost-effective, making it a great choice for both home and enterprise owners. With its strong adhesive and weather-proof design, this tape is sure to provide a strong and reliable bond for all your mounting needs.

9. Double Sided Adhesive Tape, 10m X 0.39inch, Heavy Duty, Waterproof, 5050 Led Strip Lights Compatible

This Lvyinyin Double Sided Adhesive Tape is a heavy-duty mounting tape, perfect for creating a secure hold on a variety of surfaces. The tape measures 33ft in length, 10m in width, and 0.04in in thickness, making it an ideal choice for large projects. The black foam tape is extremely flexible and easily peels without heating, gluing, or screwing, so you can cut it to fit in different applications without any wall damage.

The double-sided adhesive sticker has a pressure sensitive adhesive that bonds on contact with no drying time. The heavy-duty tape is great for furniture protection, eliminating the need for drilling, grinding, refinishing, screwing, welding, and clean up. The tape is also waterproof, making it suitable for most surfaces, including outdoor and damp locations. It's perfect for installing flexible LED strip lights such as SMD 2835, 3528, and 5050.

This high-quality double-sided adhesive tape is a great choice for any project, whether it's a home office decor, an outdoor installation, or a large-scale project that requires a secure hold. Its flexible and extendable design makes it easy to customize for your application, and its waterproof nature ensures it will stay in place and last for years to come. Get the Lvyinyin Double Sided Adhesive Tape to ensure a reliable hold and durable finish on any project.

10. 3m 10mm Double-Sided Tape For Led Strip Lights

The Rextin 10mm 3m Double Sided Tape Adhesive is a reliable and durable product perfect for a variety of different projects. It is capable of bonding together a wide range of materials such as wood, metal, glass, paper, paint, and many plastics and fabrics. It also has a high level of adhesion to LSE materials such as Polypropylene and some Polyethylenes as well as coated papers and varnishes.

This product is designed for use in a range of applications, from case and panel to LCD and LED adhesive. It has a half transparent color making it easy to use and the non-woven cloth and acrylic coating on both sides adds to its durability and temperature withstanding. Additionally, it is waterproof, making it perfect for a range of different projects.

In conclusion, the Rextin 10mm 3m Double Sided Tape Adhesive is a great choice for a range of different projects. It is strong and durable, capable of bonding a variety of materials together. It is also waterproof and temperature withstanding, making it perfect for outdoor projects. The half transparent color and non-woven cloth and acrylic coating on both sides adds to its durability and usability.

Best Double Sided Tape For Led Strip Lights FAQs

Can I use double-sided tape on LED strip lights?

Yes, double-sided tape is a suitable option to use when attaching LED strip lights. Double-sided tape provides a strong bond between the LED light and the surface, allowing for secure and permanent installation without the need for screws or other hardware. However, for maximum adhesion, it is important to clean the surface and LED strip with an appropriate cleaning solution before applying the tape. Additionally, it is important to buy the correct tape for the LED strip light, as depending on the type of strip light, different types of tape may be required. For example, UL approved tapes should be used for UL rated LED strip lights. Finally, it is important to apply the tape in a neat and orderly manner, ensuring that it is firmly pressed down, and that any overlapping pieces of tape do not get in the way of the LED light.

How do you tape LED strip lights?

The best way to tape LED strip lights is to use a double-sided adhesive tape, such as 3M VHB tape. This type of tape is designed to provide a strong bond while being easy to remove and reposition. When applying the tape, make sure to evenly distribute it across the LED strip and to firmly press it down before you turn on the power. Make sure to use a bit of pressure to ensure a good seal. Additionally, it’s important to clean the surface of the mounting area and the LED strip itself before applying the tape. This will help the adhesive to work properly. When mounting the LED strip, make sure to leave enough slack so you can easily access the power and control sources. Finally, ensure that the power and control sources are properly connected and secured in a safe place.

What tape can I use to hold up LED lights?

For holding up LED lights, you can use a variety of tape types depending on the specific application. For general purpose use, a strong double-sided foam adhesive tape is ideal because it won't damage the surface it's attached to and provides good adhesion. Double-sided mounting tape may also be used for heavier items and for securing LED lights to surfaces that are not perfectly flat. For mounting LED lights to uneven surfaces, such as a brick wall, a construction grade adhesive tape can be used. When mounting LED lights on walls or ceilings, it’s important to make sure the tape is rated to handle the weight of the lights, as well as the environment they’ll be in. For outdoor use, UV resistant and waterproof adhesive tape is best. In addition, it’s important to make sure that any tape used is rated for the appropriate temperature as LED lighting can generate heat.

Sharing is caring!

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *