20 Best Corner Tv Wall Mount 65 Inch (2023 Updated)

This is perfect for my TV. The installer from Best buy did an excellent job mounting it to my wall. As well as mounting my TV to it. It took him very little time to install this.

I needed a corner wall mount for a 70 inch flat screen. This was easy to put together and mount! Did not disappoint! Highly recommend!

This is a very serious TV wall mount. I tend to be a suspicious guy and read advrtised descriptions with a grain of salt. This unit is well designed, well made, perhaps a little lacking in instructions.

Plenty of drawings but not much in English. A little bit of structural common sense is helpful. Holds my 65″ Samsung flat screen securely. Would probably hold double that. I would give it 5 stars with better directions.

Jad D.

This mount is wildly overpriced for the quality. Cheaply made, frustrating assembly, and the instructions tell you to use a 1/4″ drill bit which is too big! Doesn’t actually offer full motion- does not tilt within 5 degrees to the sides to level screen, does not tilt to angle downwards.

Would give zero stars if I could- you can find much better quality for half the price on Amazon, which is what I now have to do to replace this piece of garbage. Save your time and money (and walls).

I am very pleased with the wall mount’s looks and performance. It is very sturdy comes with a lifetime warranty. My only complaint is the somewhat confusing instructions for installation. Fortunately, I am a very smart woman, so I was able to figure it out.

My 22 year old daughter and I installed it ourselves, and we are now enjoying my 50″ tv from the safe corner of the living room, up away from the grandkids who wouldn’t leave the tv alone. lol.

Solid mount and easy installation. Tilt and extend from the wall really far. Installation hardware was clearly separated with decent instructions for various wall types.

Had to have the arm replaced because it came broken but Kanto was very helpful and shipped a new one no problem. Very easy to put up. Needed a little help so have a friend around. So far so good

Great corner style mount. The screws that hold the cover plates at the top and bottom were hard to get off and ultimately led them to be stripped, but other than that this mount works great!

I would skip this one and get https://www. monoprice. com/product?p_id=43209 instead. I have both and the product id 43209 is a much more straight forward install and is sturdy. This does not come with a mounting template.

Also, you have to have someone hold the mount in place while bolting in the mount. The other mount, the bolts can be installed first and then the mount hung onto the bolts. The instructions are not great (they are okay) When the arm is extended more in one direction (like in a corner mount with 45 degree position), the mount cant handle weight very well as TV becomes noticeably unlevel by about an inch.

The tilt mechanism is very difficult to adjust once the TV has been mounted (unless you have children’s hands) and requires trial and error to get the tilt to be zero degrees or even on both sides. Overall its a decent mount and will get the job done eventually.

This mount is a tank! I have 4 in my classroom where I often move 40-80 inch TVs around between these mounts, depending of what classroom layout I need for a specific course. I also have one at home with a 55 inch TV on it.

It is a little crude but super sturdy and it is easy to move my TVs on and off these mounts. Moving and adjusting the viewing angle can be somewhat hard but normally I do not have to do that too much once a TV is in place.

I recommend this mount if you what a super sturdy mount for a heavy TV.

I purchased this wall mount to hang my 50″ plasma TV with the expectation that I could swing the TV out orthogonal to the wall for viewing from the kitchen in our open-concept living room/kitchen area.

I carefully measured the TV and analyzed the dimensions given by Monoprice, and all was a success in the end. However, there are a few small details (both bad and good) that I wasn’t aware of to consider next time: – The pivot point from the wall bracket is not centered on the wall bracket.

Therefore, you must mount the bracket off-center of where you want the TV, or mount the TV off-center of the mounting plate. I had to do the latter as I didn’t realize this design “feature” until afterwards, which causes the mounting plate to be unbalanced.

– Due to the unbalanced nature of the mounting (see above point), I had to dismount the TV and tighten up the four screws that provide horizontal pitch adjustment. Not a huge deal, but not convenient–it’d be better to have those bolt heads accessible from the back side of the mounting plate.

– Also due to the unbalanced mounting of the TV onto the mounting plate, I’m not sure how orthogonal I could get the TV. Because I had to shift the TV to the right to center it and we always swing it out to be viewed from the left, I think the functionality is much better than it would be.

– The wing screws that provide vertical pitch adjustment need some locking washers or something to grip tighter into the painted steel. Otherwise, you have to really torque these down to keep the TV from tipping forward.

The wing screws themselves don’t preclude doing this either–normal hex-head screws would have been better here. – You have to be careful routing any cables/wires along the pivot arms so that they don’t get pinched while moving the TV around.

Copious zip ties help. – The built-in bubble level is a nice touch, but the mechanical engineer in me wonders what the manufacturing tolerances of assembling it into place are. 🙂 Overall, though, it’s well-built and I have no doubts about its strength or durability after a month or so of using it.

The good, its pretty sturdy for a single arm swing out mount. The not so good:1) very light weight screws, snapped one of the lag bolts. 2) lag bolts: 12mm socket didn’t fit them, neither did a 13mm socket.

1/2 inch socket fit best. 3) Instructions call for a MINIMUM of 16 inch spacing between bolts. The widest spacing allowed by the mounting plate is 16 inches. So the minimum became a maximum. I had to drill mine to accommodate 18 inch spacing (old house).

24 inch spacing is not that rare, if your studs are spaced out that far, you will be SOL. Two lengths of bolts were included to attach to my TV: 40mm and 15mm. Unfortunately, I needed 25mm bolts. Spacers were too long.

Note, every TV is different, I used 25mm long bolts on the top, and I used the 40mm bolts (with a couple of extra washers, not included) for the bottom. Despite the shortcomings, I would buy this unit again.

My TV only weighs 36 pounds, to this mount is overkill, but what I would prefer (minimal/no sag). Maybe I over-rated this one at a \4\”.

Love it. My 16″ studs were not centered in the space where I wanted to mount my TV, but I was able to use the wider wall mount and adjustable bracket to get my tv exactly where I wanted it on the wall.

Looks incredible, and large range of motion makes cable management and mounting the TV itself a breeze.

I’ve worked with some cheaper versions before and they get the job done but this was obviously a quality mount. Very smooth, easy to work with and heavy duty. Great motion.

Needed an extending TV mount to get the TV about 20 inches away from the wall. This worked out perfect.

We habe a Vizio with a wide bolt pattern on back and this is the ONLY wall mount stand that I could find that was wide enough for the bolt pattern. The matrrial is thick and asdembles to make a very sturdy wall mount TV stand.

Had this mount professionally installed, it came with everything they needed and cost 75% less than they wanted for a similar mount. Works and looks great!!

The dresses were great but the picture makes you think you are getting more. There are a ton of little pieces. Really not necessary.

The two brackets seem to also be a bit more secure than a single one. The hardware that comes with the mount is once again useless; thankfully the Sony TV I mounted with this came with the proper spacers and screws that I could use.

Needed completely different hardware for the wall, nothing was usable from the included bag.

This is a nice mount, has all the appearance of beefiness, but is actually pretty weak. It’s rated for 115 pounds, but there is no way it could hold that. My TV is just over 60 pounds, and it sags a LOT.

I’ve cranked everything as tight as possible, and I don’t even have it extended very far, and it just sags. Fortunately, it sits right about the cabinet, and I was able to prop it up with some pads, so the mount holds it roughly in place while the pads stop it from sinking.

So, long story short, I wouldn’t suggest this mount for any TV over about 40 pounds.

Works Great. But for my piece of mind i wish the mounting bracket on the wall was a little longer on each side so that instead of having 4 screws in a stud you can get all 8 in studs. More for my piece of mind.

Regardless its doing everything i want.

Was super easy to install and line up with the studs in the wall. Much easier than other units I have purchased from other manufacturers in the past.

Easy install, this is the right TV mount. One person can handle it without a problem.

This is a well constructed, heavy duty wall mount bracket. However, I mounted a 42″ wide television and found that it was too large of a TV for this bracket hold it out away from the wall. If I had mounted a smaller TV, say a 27″ or smaller, this bracket would have worked well.

With the larger TV, which I wanted mounted in a corner, it would not accommodate the TV and was found to be unsuitable. I had to build a wooden bracket across the corner to which I attached the metal TV wall bracket.

This bracket would work well on a flat wall away from the corner. The description “articulating TV wall mount corner bracket” is misleading. It is articulating, it is a wall mount bracket, but it is definitely not a corner bracket for a larger TV.

The quality is much better than I expected at this price point. Easy to understand instructions and the completeness of the included hardware makes for an easy install. I would recommend Mount-It to anyone looking to hang a TV on a wall.

Great price. Strong metal holding my 50”tv. Bolts,screws, level, everything in box. The mounting bracket holes lined up perfect with Samsung tv. The arm is adjustable to pull out from wall and swivels left, right and tilts up or down.

We placed it about 2ft from corner of wall. So the adjustable arm is perfect! We never installed wall bracket before. We did find studs to bolt into wall. Leveling is important so we triple measured and leveled along the way.

Works perfect. I live in a small studio type unit. Mounted it on the end of a dividing wall and can swivel it from the living room into the bedroom.

So easy and fast to hang. My husband had it up in no time. And it is a great price. Fast shipping to. I fully recommend it.

Very easy to install. I was pressed for time,but because of the simplicity of the unit i had the tv hung in under an hour Times my vary depending on where and what the wall is composed of and size of tv.

No matter what, the price of the mount makes this a no brainer.

I got two of these for two different model TV’s. One bracket I did not need to use the extended arms and that fit perfectly. This was on a TV that was less than 4 yrs old. The other bracket on a TV that was 9 years old it did not work so well.

The extended arms were needed and both myself and a tech could not match up the holes. I do like the fact that its for TVs that weigh up to 80lbs. It was easy to install, not by me but by the tech :-).

The price was really reasonable to other products that are found at local stores and it is definitely a full motion bracket.

Definitely the best bang for your buck, if you’re looking for a low cost TV mounting solution. Comes with a variety of fasteners, spacers and brackets to accomodate many different TV’s. Installation instructions were very detailed, even though assembly and installation were fairly straight forward.

Construction was very rigid.

I made the mistake of purchasing a less expensive wall mount for a very nice 43″ QLED. For the $12. 00 or so dollar difference in price, you’re much much better off with this mount. This mount DOES give you some downward angle, which is needed if you mount it up out of the way in your bedroom.

Mine is just over the wall mounted mirror. With the extra reach from the wall, you can mount just about any length of 2. 1 soundbars below or behind your TV.

I got this to add a third monitor. I already had the MI-752 with two 24 monitors, and I had the option of getting a third so this seemed like the way to do it (I had having stuff on my desk). It comes with the necessary tool(s) to assemble, and options for cable management as well.

The only caveat is that if you’re in a cubicle where the desk is close to the wall you might be in trouble. The C-bracket that mounts to the desk is robust, but you can only assemble it from the BACK.

So I had to take my desk apart, which wasn’t a big deal for me, but may be a step far for many. The other option is drilling a hole in the desk, but I doubt this would be an option at work for many.

TV Mount works great for larger TVs. It would be nice if they could include a paper template to help determining where mount is to be placed on the wall and where the mount and available studs may be.

I ended up using the anchors because the studs were not located in a way that you could shift the mount one way or the other and get more than 1 stud. Not installing these frequently, it took me a bit to do the math to try to make sure I centered the mount and got it at the right height as this was being mounted above a fireplace.

I was very impressed with this Kanto TV wall mount. To start it is very well packaged for protection during shipment and no loose items rattling around in the box. Upon opening the box I immediately noticed the clean design and nice black finish.

The Kanto mount has the look and feel of a quality piece of engineered kit. The instructions were very easy to follow and the wall mount template with catch tray for drilling debris is a thoughtful touch.

The mount comes pre-assembled and all you need is to attach one part to the back of your TV and the other part to your wall. I hung a 60 inch Samsung TV with this mount and it is both very sturdy solid plus the mount moves nicely in all directions to give you the full motion capability.

Took me less than one hour being careful and taking my time. My wife did help to lift the TV up to the mount as I was placing it at eye level when standing. Two people can make that part a lot easier if you need to lift high or have a large TV.

I have worked in engineering design for many years and recognize both the well thought out ruggedness of construction and the smooth operation of this Kanto wall mount. I would easily recommend this mount to anyone with a TV that meets this design requirements.

You will need to be sure that your studs are placed no wider than 16 inches for this mount to work but other than that I am very impressed!.

I have installed quite a few mounts in my time (about 20) and this is hands down the best mount I have ever purchased. Let me explain; First, this mount comes with a spot on template for you to tape on your wall once you find the studs.

No need for drawing on your walls and time consuming markings. If you follow the directions and tape the holes before you drill, there is a little “catch” on the bottom of the cardboard marker and I had 1 small drywall shaving on my floor.

Fantastic! No mess, no clean up. just throw the cardboard out. Second, the mount is high quality for the price. The arms are nice and sturdy and there is ZERO droop when fully extended. Zero. Only thing I would say is don’t pull on your TV when bringing it from the wall out for the first few times.

Its pretty stiff. Last, there are no ugly bolts showing when you pull it away from the wall. They come with this fantastic plastic bolt covers that leave a nice clean look once its all installed. Oh and also it comes with a few cable management covers on the arms.

all I can say is for the money, this has the quality of a high end mount without the massive price tag.

This mount was easy to install for the most part. I consider my self more on the tech-y side than the handy side, so the installation video on the manufacturer website was insanely helpful. It was current info, and applied directly to what I was installing.

I was able to measure a million times, “cut once,” and my mount and TV are level and flush to the wall. The articulation on the mount is pretty stellar–as advertised, extends over 2 feet, so perfect for when I have to get behind the TV to do some work, or pan it over to workout with the Peloton app on my elliptical.

Great product all around!.

Calls for screws into 2 studs per side, but mounts are only about 12 inches wide. chances are you dont have 2 studs that close together that will work for your needs. I didnt, so only secured on 1 stud per side.

Seems sturdy still, but not sure I’d trust 88 lbs. I have a 58″ up with very little wiggle room. a 70″ would be pushing it. Not as adjustable as I hoped, and you’re not able to adjust anything while the TV is hung which is a pain.

Has no adjustment to level, so make sure you are spot on with your level, because there is no forgiveness with this. All that said, thing seems pretty sturdy and gets the job done at a nice price.