Caulk for tubs and showers is a type of sealant that is used to fill in gaps and cracks in order to prevent water from leaking through. It is typically made from silicone or latex and is applied using a caulking gun.
20 Best Caulk For Tubs And Showers
1. Red Devil 0406 Kitchen & Bath Siliconized Acrylic Caulk 10.1 oz, White
Good caulk. I have lots of gaps and holes in my stucco, especially on a parapet where the stucco meets some flashing up on the flat roof. The tubes are not sealed, so it may not last as long as other caulks if you have some left over, but it saves me from having to pull out the pin on the caulk-gun and poke each tube.
I always forget that and put the tube in and then have to take it back out and poke it and put it back in. Seems to set up nice and sticks to the stucco and the flashing.
Loctite clear silicone is a multi-purpose adhesive and sealant which creates a waterproof, protective seal that is ideal for metal, glass, rubber, tile and porcelain. It is designed to be used indoors and outdoors to repair everything from electrical connections to seams on boots to stop leaks in wet weather.
Loctite clear silicone can be used to bond or repair saltwater or freshwater aquariums.
Protect work area. Surfaces must be clean, dry and free of old caulk, grease, dust and other contaminants. Pierce tube with point at end of cap. Attach nozzle & cut to desired bead size. 1. As an Adhesive: Apply a continuous, even bead of silicone to one surface. Assemble parts immediately. Leave bond undisturbed for at least 2 hours. As a Sealant: Hold tube at angle. Apply by pushing silicone into joint. 2. Clean-Up: Uncured: mineral spirits. Cured: Carefully scrape excess with razor blade of sharp-edged too. Open Time: Tack Free Time: 45 minutes. Cure Time: 24 hours. Cure time dependent on temperature, humidity and thickness of product used. Cured Form: Transparent, non-flammable, flexible solid. Tensile Strength: 325 psi. Application Temp: Above: -35 degrees F (-37 degrees C) to 140 degrees F (60 degrees C). Withstands: Short Term: -50 degrees F (-46 degrees C) to 392 degrees F (200 degrees C); Long Term: -50 degrees F (-46 degrees C) to 350 degrees F (177 degrees C). Not Recommended for: Not paintable. Do not use on marble, limestone, brass, copper, magnesium, iron, zinc or galvanized metals. Hard to bond plastics such as PE, PP, PTFE, PMMA, PC, or PVC. Not suitable for below grade.
Prolonged or repeated contact with uncured adhesive may cause eye, skin and respiratory tract irritation. Repeated or prolong contact may cause allergic skin reaction. Read carefully cautions. Contains petroleum distillate, alkyl acetoxysilane and acetic acid. Acetic acid, which irritates eyes, skin, and respiratory tract, is released during curing. Avoid breathing vapors. Use with adequate ventilation. Do not get in eyes, or skin or on clothing. First Aid: In case of skin contact wipe off and wash with soap and water. In case of eye contact flush with water for 15 minutes, call a physician immediately. For respiratory difficulty, move to fresh air. If swallowed, do not induce vomiting. Call a physician immediately. Keep out of reach of children. Chemically Curing Sealant – VOC 3%.
Reviews From Real Customers
I have tried different brands of silicone over the years and most are pretty much the same, with the biggest variation being price. Caulking is a good thing given the caulk holds up and works. I find 100% silicone is very effective in sealing and being waterproof.
Lasts. Dries clear like it should. Fills the cracks like caulking is supposed to. A bit goopy, but that’s normal The clean up is a bit more than other acrylic caulking, you need mineral spirits. So wear gloves.
he only things you have to worry about when using it as a project adhesive: 1. If you’re using it to attach things for projects, it can come apart if it takes a sharp blow or falls. I don’t recommend it for areas which will be bearing a lot of weight or tension.
2. If you use it attach natural stones to something, be aware that very porous stones like limestone or sandstone may react adversely and dissolve over a few weeks. Silicone is more than caulk. It’s also a great adhesive.
I used this product to adhere mylar-backed bubble insulation to my garage doors. It sets up quickly and holds most materials. Most importantly, it doesn’t get hard, brittle or shrink, so it will last a very very long time.
I used this to seal up where the backsplash was separating from the wall. I hope to keep out water from dripping behind there and bugs from going behind there. I cut the tip to the smallest size because I didn’t want to create a goopy mess.
Dispensing the product was super easy. It might take a little strength to squeeze it out thought especially if you are using the smallest opening. But once you get it going and get the hang of it, it’s easy to use.
I squeezed out a line and was happy that it’s not super noticeable. The pics are before and after applying, but I went a step further and smoothed out the line (not pictured) to make things look a little neater.
That was easy too as long as you do it immediately before the sealant starts to cure.
It is great for kitchen, bath, window, doors, auto, marine plumbing, gutters and more! Ready for water exposure in just 30 minutes. This waterproof sealant is mold & mildew resistant. The clear silicone sealant won’t yellow, shrink or crack over time!.
This product worked exactly as advertised. A little goes a long way. I used it to seal the grout between the new countertop and existing tile backsplash. If you use too much it looks like there’s a bunch of Vaseline so use sparingly.
Just enough to put a sheer layer is enough for waterproofing. A couple of notes: You will see a bunch of reviews saying the container exploded on them. This is most likely because they didn’t break the seal.
You need to poke a hole in the seal in addition to cutting the tip off. Also, the product smells very strongly of vinegar. I don’t mind it. In fact I prefer it to the chemical odor of other sealants.
I allowed this to cure for over 48 hours and it seemed dry and set. But the first time it got damp it turned to sticky jelly! I noticed there was no use by date on it which concerned me. But after using it it seemed to set well.
It never occurred to me that it wouldn’t hold up to dampness. And it was a brief period of dampness. This is the third Gorilla product I’ve bought from DiscoverMyStore, and all three have been unsatisfactory.
Item was very messy because tubing is not sturdy. The base of the tube kept popping off and the silicon was very hard to get to come from the top of the tube. Had to throw the entire tube away because the base kept sliding off and couldn’t stop the product from seeping from the top.
Really messed up my project. Not the seller’s fault at all. Just not good packaging for the product.
GE Silicone II Kitchen and Bath 100% silicone is a 30 minute water-ready caulk with 7 year mold-free product protection for use in kitchens and baths as well as around sinks, tubs, tiles and countertops.
It is guaranteed not to shrink, crack, break down, wash away or yellow.
The guys at the major home supply recommended this exact brand. I used it to seal my new bathroom sink. This size was the perfect amount. I selected silicone because of how professional you can make it look using soap water to smooth it out.
I’ve used this same stuff years ago and it’s held up really well.
White is apremium performance 100% Silicone Sealantthat provides10 year mold and mildew resistance. It wont crack or shrink, providing adurable, permanent 100% waterproof seal. DAP Silicone Max is water resistant in 30 just minutes, and once cured, it is safe for incidental food contact.
Ideal for a wide variety of kitchen and bath applications such as sealing around sinks, tubs, showers, back splashes, countertops and fixtures.
Seems to work okay, but super duper stinky. The fumes are so aggressive, they sting your eyes as you’re working. Definitely do what the bottle says and wear goggles (and gloves) while working, and air out the space afterwards.
I used this silicone seal in my bathroom and fill up a gap at the edge of my shower stall. It is easy to apply and instructions are easy to follow. I am happy with the end results. No more leaking afterwards.
It performs well and have slightly shorter curing time than others. I would definitely consider this item again next time I need a silicone sealant for my kitchen or bathroom. I was aware of this product before participating in this program but I have never bought it before.
GE Silicone I Tub and Tile 100% silicone is a permanently waterproof caulk for use in kitchen and bath, as well as plumbing applications. GE Silicone I Tub and Tile provides mold-resistant product protection as never cracks, shrinks, breaks down or washes away.
Tip: Most caulks that are water clean-up (e.g. most acrylic, siliconized acrylic or acrylic plus silicone) are not permanently waterproof. Instructions: 1. Remove dirt, grease, moisture, soap residue & old caulk from area to be sealed. Use backer rod for gaps larger than 1/2 inch x 1/2 inch. 2. Cut nozzle to obtain desired bead size. 3. Pierce inner foil seal. 4. Using caulk gun, apply sealant into gap. Smooth the sealant into gap. 5. Wipe hands & tools thoroughly before washing. (6) Allow 12 hours before exposing sealant to water. Not for underwater/aquarium use or where FDA compliance is necessary.
See limitations on back: Warning! Uncured product causes irritation. Read back panel before using. Warning: Uncured product may cause skin, eye, & respiratory tract irritation. May cause headache, dizziness, nausea. Acetic acid released during cure. Avoid breathing vapors. Use in well-ventilated area. Wear gloves and eye protection and remove contact lenses before using; thoroughly clean hands after use. Eye contact: Flush eyes with water; get medical attention if irritation persists. Contains methyltriocetoxysilane, acetic acid and petroleum distillates. Harmful if swallowed. Consult safety data sheet for further information. For consumer and professional contractor use. Keep out of reach of children.
7. Dap Alex Plus Latex Caulk with Silicone – 10.1 oz applicator
Superior quality, multi-purpose interior/exterior use paintable excellent adhesion and flexibility exceeds astm c-834 300ml Cartridge. Superior quality, multi-purpose acrylic latex caulk plus silicone.
Highly flexible and durable. Excellent adhesion. Cured caulk is mildew resistant. Interior/exterior use. Paintable. Water clean-up. 35 Year Durability Guarantee. Exceeds ASTM Specification C 834.
I used one tube but it was not normal quality or stickiness when applying. The manufacturer told me it was probably expired and not normal quality. I must warn to check carefully before using caulks that may be old stock and defective as mine.
Normally THIS CLEAR CAULK should have a slimy stickiness on your fingers that is hard to wash off. This defective batch was not like that. I hope my hours work up a ladder won’t have to be redone. Normally it should have super adhesion and super flexibility and noticeable shrinkage when dry.
Tried this product many times. Utter garbage. Doesn’t set hard. And when it does, it sets in white, not clear as advertised. Seems to be a known/recurring problem. Home Depot should listen to its customers and resolve this with the manufacturer, who seem to be making excuses that their product had no defects – nonsense! After scraping it all off, i tried MONO Silicone instead, worked perfectly first time; although it is pricey, but at least it did the job perfectly.
I only wish Home Depot would restock the GE Silicone brand which when i previously used it worked well, and cost less than the MONO brand. HD, please do something about this!.
Mold Armor 100% Silicone Mold Free Caulk & Sealant (White) works on indoor hard surfaces such as glass, granite, marble, wood, ceramic, metal, aluminum, fiberglass, and painted surfaces. The flexible, crack-proof formula is made of silicone and has excellent adhesion.
This chemically curing sealant is both mold and mildew free and works for the shower, tub, kitchen and countertop. To use, remove any caulk, dirt, grease or soap residue from the desired surface. If mold is present, use a mold and mildew cleaner such as Mold Armor Mold & Mildew Killer and Quick Stain Remover to kill any mold on the surface.
Once dry, surface is ready for application. Packaged in a 5. 5 oz. tube. Keep out of reach of children.
We had a small hole in our shower wall that we were advised we could fix ourselves. We got some Mold Armor because it was marketed as mold free and good for tubs/showers. The product is easy to squeeze from the tube and applies evenly.
We used a putty knife to smooth out the surface and it dries quickly. It does have a strong vinegar like odor, but it dissipated quickly after application. We then used it to patch a bad seal of my in-laws master shower door.
Worked like a charm. No more puddles after showering. Highly recommend!.
Loctite PL Heavy Duty Sealant is the first and only sealant that can do it all. Because of its unique 5x stretch and superior strength, Loctite PL Heavy Duty Sealant provides a durable seal that lasts a lifetime.
PL Heavy Duty is an all condition, easy to use sealant that provides all the best benefits of traditional sealants in one. It makes the decision process of choosing the correct sealant for your project quick and easy.
Its superior adhesion and low odor biocide formula, makes it a perfect sealant for a multiple of interior and exterior projects including; tubs, showers, fixtures, sinks, countertops, tile, trim, baseboards, sealing around windows, doors, siding and many more.
I installed white PL Heavy Duty Sealant around a bathtub/shower base two years ago. The area was spotless clean, dry and treated with Mold Control before application. The material was easy to apply and form, had a pleasing appearance and held up well to the moist environment until a spot of mold appeared recently.
The spot proved impossible to clean away (standard bathroom cleaners, Mold Control, Acetone, Methylene etc) and within two weeks it had spread to a section of caulk over a foot long. Upon removal, cross sections at various locations of the discolored section seemed infiltrated by mold.
The product is rated mold resistant. I would expect more from a premium bathroom caulk.
Overall a great sealant. Works stiffer than silicone, just different. I used on exterior siding when it was colder out. The Loctite sealant can be used in cold weather, another benefit. I taped off joints for clean finish as I would with any sealant.
White color is bright white. I was sealing white siding so I didn’t have to paint it. Curious to see how it ages, but for now it’s a great all around sealant with many applications.
I’ve had this sealant for a week now and I’ve already used it on a few around-the-home tasks. It has worked great on all of them. I used it to put a tile back in place in the bathroom, I used it to put a piece of furniture back together, and I used it to reseal the seams of the bathtub.
It has worked great on all of those jobs. It is not messy like some other sealants I’ve used and it comes out of the tube easily. The odor isn’t overpowering either. I am very satisfied with this and will keep using it.
DAP KWIK SEAL kitchen and bath adhesive caulk is an easy-to-use adhesive caulk that bonds like a glue and seals like a caulk. It provides a 100% waterproof seal around tubs, sinks, showers, countertops and fixtures.
It can also be used to repair loose tiles and fixtures. KWIK SEAL tools easily and is tack-free in 15 mins. It is paintable, low in odor and cleans up easily with water. Provides a durable, watertight seal.
Provides a durable, watertight seal. Excellent adhesion and flexibility. Cured caulk is mildew-resistant. Bonds like a glue and seals like a caulk.
Caulk that keeps water out is essential for projects dealing with windows, kitchens or baths. GE Silicone I 100% silicone caulks are permanently waterproof, meaning water will never break them down or penetrate them, helping to protect your projects from problems like water damage and mold growth.
Clear bathroom silicone applied easily, and produced a consistently sized “bead”, from caulking gun. Cleaned up with soap and water without difficulty. Applied silicone can be easily “shaped”, after a few minutes of application, with a finger dipped in a diluted mixture of dish soap and water.
GE Tub and Tile Silicone 1 Sealant is a 100% silicone, 100% waterproof sealant ideal for areassusceptible to moisture, such as sinks, tubs, showers, fixtures, countertops, backsplashes, andother plumbing projects.
Tub and Tile Silicone 1 offers permanent flexibility and strong adhesion,and its designed to be resistant to shrinks and cracking. Plus, GE Tub and Tile Silicone 1 Sealantresists mold and mildew growthits backed by a mold-free product protection for sevenyears–to prevent unsightly stains.
Use our silicone bathroom sealant on a variety of commonsurfaces, including most metals, plastics, and woods; glass, drywall, plaster, granite, and more.
GE RE-NEW is an innovative solution for repairing ugly looking caulk in your kitchen and bathroom. Easily repair molding, yellowing and cracking old sealant joints in only 1-step. Damaged caulk in your kitchen area or bathroom can unfortunately have long-lasting impacts.
Instead, try the right kind of long-lasting results that come with the quick and simple use of GE RE-NEW Sealant in no time at all. No need to take out the old sealant, just pass over the existing sealant with GE RE-NEW specialty silicone for a long lasting and durable seal.
As easy as using a highlighter with professional-like quality. GE RE-NEW Kills, Repels and Prevents mold from growing once properly applied. One tube of GE RE-NEW covers 1-typical shower/tub application.
RE-NEW your caulk like new, with GE RE-NEW. Color: White.
I was super excited to try this out because the caulk in my bathroom was pulling away from the sink, and instead of having to bug anyone to do it for me, I could do it myself! I have never done anything with caulk but I have watched people do it and I am a crafter so I was confident with this I could make it nice and smooth.
Well I didn’t account for my messiness, so the first part was not as smooth but I was able to smooth it out with my finger. Then I slowed down and got a little more confident as I went around the sink, and it went on nice and smooth! That was slick! Then I went around the sink and smoothed it out with my finger.
It took a while to dry, but my bathroom doesn’t have much ventilation so I think it would have been dry sooner if there was a little more air flow. I really felt like a professional Handy-Woman after this little project! I also love that I didn’t have to scrape the old caulk off and I was able to do it right over the old stuff, so much easier and less messy! I will be buying more of this and redoing all the caulk in my bathrooms, now that I am an expert!.
GE re-new, in Cartridge form (you will need a caulk gun). ** not a company advertised use for the product ** I have an aquarium that I repurposed into a plant Terrarium. After moving homes, discovered the glass had a few leaks around the bottom edges.
Re-New specs state waterproof and can apply directly on top of existing silicone sealant. The cartridge came with a self-tooling nozzle, which made the job so easy to apply. Just had a learning curve applying the proper pressure releasing the product as I moved the caulking gun along the bottom edges.
Left it to dry for three days (longer than the recommended time). It has been a few months since the repair and so far no moisture leaks.
Loctite RE-NEW is an innovative solution for repairing ugly looking caulk in your kitchen and bathroom. Easily repair molding, yellowing and cracking old sealant joints in only one-step. No need to take out the old sealant, just pass over the existing sealant with Loctite RE-NEW specialty silicone for a long-lasting and durable seal.
As easy as using a highlighter with professional-like quality. Loctite RE-NEW is mold and mildew-resistant once properly applied. One-tube of Loctite RE-NEW covers one typical shower or tub application.
The GE Re-New Kitchen and Bath Sealant comes in a 2. 7 fluid ounce bottle with an easy to use applicator that easily makes silicone look new and fresh. This product is super easy to use and NO removal of old silicone is required you simply ow the instructions and apply over old silicone making everything look fresh and clean.
The applicator comes with an auto-smoothing tool which is an added bonus for ease of application. I used the white color and within minutes the old silicone around my bathroom sinks was easily sealed.
You must avoid water contact for 6 hours to allow the sealant to dry and within 24 hours the sealant is fully cured. You can store this convenient-sized container for up to one month after opening. The sealant will cover about 16 feet.
The applicator is so easy to hold in your hand during application and also easy to store. The Re-New sealant is definitely going to be a handy DIY project in my home. The results are amazing.
The GE Renew Squeeze Bottle Caulk was the prefect amount to go around the tub and prevent waste of a tube of caulking that would just get tossed. I really liked it could be dispensed right over the top of the current caulking and it adhered and covered really well.
The applicator tip is pretty good, though I still used a wet finger to smooth for a nicer, rounded finish. The scent wasn’t overbearing like some caulking, and it seemed to dry quicker then some other brands.
I think this is a pretty good product and will see how it holds up. If so, it will be a great addition to the toolbox for quick jobs due to ease of use and no waste. I only deducted points as the applicator could have been better adapted for rounded corner, which is common in met caulking applications.
I used this product to give my bathroom shower caulking a fresh new look and I’m no longer embarrassed by my shower area. The instructions are great and I was able to follow them easily. I’m not the handiest person so I usually pay contractors to repair most things around the house.
It adds up quickly. This is another project I was prepared to pay someone else to complete. Fortunately, I didn’t have to and ended up saving some money. I am so proud of myself and will be able to complete touch ups in the future on my own.
I love this product and highly recommend it for others that are not handy or those that just want to save time with quick touch-ups. I also think it makes the perfect housewarming gift.
GE-branded Max Shield Ultra Seal siliconized acrylic latex sealant is a premium sealant great for paint projects susceptible to humidity and moisture, from kitchen and bathroom fixtures such as sinks, tubs and showers to countertops, backsplashes and general plumbing applications.
It is paintable, resistant to cracking, low in odor, guns out effortlessly, tools smoothly and cleans up easily with soap and water. This premium sealant is scrubable and exceeds ASTM C-920 for strong durability, creating seals that retain their original clean look and long-lasting, professional results.
GE Tub and Tile Silicone 1 Sealant is a 100% silicone 100% waterproof sealant ideal for areas susceptible to moisture such as sinks tubs showers fixtures countertops backsplashes and other plumbing projects.
Tub and Tile Silicone 1 offers permanent flexibility and strong adhesion and it’s designed to be resistant to shrinks and cracking. Plus GE Tub and Tile Silicone 1 Sealant resists mold and mildew growth-it’s backed by a mold-free product protection for seven years–to prevent unsightly stains.
GE Paintable Silicone kitchen and bath sealant is a 100% waterproof sealant designed for most kitchen and bathroom applications. This sealant has a unique hybrid formula that combines the outstanding waterproof performance you would expect from a silicone sealant with the ease of use and paintability of an acrylic latex.
In fact, it’s paintable and water-ready in as little as 30-minutes. As a result, our sealant provides a reliable seal in areas that are prone to moisture, such as showers, sinks, and toilets. GE Paintable Silicone Supreme kitchen and bath sealant offers permanent flexibility and long-lasting durability that can withstand scrubbing, and it resists mold and mildew growth when fully cured.
Use our silicone sealant on a variety of common kitchen and bath materials, including most metals, plastics and woods; glass, drywall, plaster, granite, and more. Color: White.
I installed this caulk on my new tub and tile job. It did not dry white, but was a yellow/green tint. It was also translucent, didn’t hide anything behind it. I applied a second tube of this caulk to complete the job and it worked fine.
I’m very disappointed in this expensive product. Now I have to do double work to cover the defects of the first tube.
Ace tub tile silicone caulk – 10. 1 oz. Cartridge – white – mildew resistant – 50 year durability – seals cracks joints around sinks, countertops showers – caulk goes on transparent and dries white when cured.
– bonds to ceramic, glass, fiberglass, porcelain, painted surfaces most metals – not paintable – skins in 5 mins. , dries to touch in 1 hr. , cures in 24 hrs. – apply 10 deg. F. To 100 deg. F, discovery exp, con, cor, sup.
Paintable Silicone Supreme Kitchen & Bath sealantisapremium, 100% waterproof sealant with a hybrid formula that combines the outstanding waterproof performance you would expect from a silicone sealant with the ease of use and paintability of an acrylic latex.
This formula can provide a reliable seal inareas that are prone to moisture and require painting. It offers permanent flexibility with long-lasting durability that can withstand scrubbing and has 10-year mold-free product protection that helps the cured sealant to resist mold and mildew growth.
When caulking tubs and showers, it is important to use a caulk that is made for bathrooms. This type of caulk is waterproof and mold resistant. It is also important to choose a caulk that is color matched to the tiles or tub so that it is not noticeable.
The caulk should be applied in a thin bead around the perimeter of the tub or shower. It is important to smooth the caulk with a wet finger or a caulk tool so that it is even. The caulk should be allowed to dry for 24 hours before using the tub or shower.
A budget red dot magnifier combo is a low-cost option for adding a magnifier to your red dot sight. This type of combo typically includes a red dot sight and a 3x or 4x magnifier. The magnifier mounts behind the red dot sight and magnifies the dot, making it easier to see at longer range….
There are a few different types of hair shampoos for thinning hair. Some work to volumize the hair, while others work to strengthen and fortify the hair shaft. Still others work to increase blood circulation to the scalp, which can promote hair growth. And finally, there are shampoos that contain ingredients that block DHT, the…
LS1 engines are equipped with cast-iron cylinder heads that are fitted with hydraulic roller-tappet camshafts. The camshafts are designed to provide high lift and long duration to produce high power at high engine speeds. The heads also feature large intake and exhaust ports that are designed to flow high volumes of air. 20 Best Cam…
The Bose 301 speakers are designed to work with a variety of amplifiers, including both stereo and home theater receivers. If you’re using the speakers for music listening, a stereo receiver with at least 50 watts per channel into 8 ohms is recommended. For home theater use, a receiver with at least 75 watts per…
A belly band holster is a type of holster that is worn around the waist. It is typically made from a flexible material, such as neoprene, and is often equipped with a kydex shell to provide additional support and stability for the gun. Belly band holsters are popular among shooters who want to conceal their…
A 6 inch random orbit sander is a power tool that is used to sand down surfaces. It has a circular pad that spins and orbits around a central point, making it ideal for sanding down both large and small areas. 20 Best 6 Inch Random Orbit Sander 1. Dynabrade 59040 6-Inch Dynorbital-Spirit Random Orbital…