A bolt carrier group (BCG) is a critical, and often misunderstood, component of an AR-15 rifle. The BCG is a metal housing that contains the bolt and bolt carrier, and is responsible for moving the round from the magazine into the chamber and then locking the round into the barrel.
The BCG also contains the firing pin, which strikes the primer of the round, igniting the powder and sending the bullet down the barrel.
The BCG is the “heart” of the AR-15 rifle and is what makes it function. It is important to choose a BCG that is of high quality and well-made, as this will ensure that your rifle functions properly and reliably.
There are many different brands and types of BCGs on the market, so it is important to do your research and choose one that will work best for your specific rifle and needs.
Easily bring along bulky items like luggage, coolers, and firewood on your next trip with help from the Detail K2 500-Pound Hitch-Mounted Aluminum Cargo Carrier. This cargo carrier rack can hold up to 500 pounds on its own, but it’s overall weight capacity is dependent on your vehicle’s receiver strength.
Attach this hitch-mounted cargo basket to your vehicle and get rolling. This trailer hitch cargo carrier mounts to any 2-inch hitch receiver with the included hitch pin. The hitch pin is threaded to provide anti-wobble stability during travel.
When your trip is done, the rear hitch cargo carrier flips up to stow flat against your vehicle. Built tough, this hitch cargo rack is constructed of lightweight aluminum that’s rust-proof and corrosion resistant.
The cargo rack also helps you stay safe when driving at night thanks to its reflectors.
The basket served its purpose of providing the opportunity to have more cargo. It takes quite some time to assemble. Use power tools if you can. The frame hangs quite low to the ground and often scrapes on the pavement.
Every variation in elevation needs to be approached slowly and cautiously and/or at an angle. The little red plastic plug on the end of it was gone within the first few minutes, once the frame scrapes on the ground.
I will need to find something to replace it so the metal bar doesn’t get water in it and start rusting out. I added reflectors at the side and the bottom of the frame, so when it’s tipped up, and not being used, the black metal bar can be seen.
Would be nice if there was some way to pull up the frame once it’s loaded, so it doesn’t hang so low to the ground. Next time I may try something.
Some of the part numbers in the instructions do not match the actual parts. The bolts provided do not do a sufficient job of a solid assembly. The hitch connect tube fits to loosely over the connect frame.
If I were to fold up the cargo carrier I believe it may hit the rear door of my new Blazer. I wish I never would have purchased this product on line thru Tractor Supply.
Durable and Rugged ABS material is long-lasting and helps protects contents during transit. Easy-Grip Mounting assembles in moments and easily attaches the box to the rack. SecureLock ensures that all gear is locked and box is properly closed prior to driving.
Passenger-side opening for easier loading and unloading. Low-profile design provides greater garage access without sacrificing box capacity. Fits Thule rack systems, round bars and most factory racks.
1 One-Key Locks (included) secure box contents and lock the box to the carrier.
I have one of these roof top carriers and have really enjoyed it. Works great on my Subaru WRX to carry extra camping gear. Recently I was locking the box as normal and the key broke off in the lock.
I had packed the gear to return home so I figured I’d just leave it locked until I got home and could deal with it then. Once home I was unable to get the key out and wound up having to tear the lock mechanism apart to get the box open.
I contacted Thule “support” to see about getting new parts to fix the lock. Took a week but then they replied with “here’s a link to buy a new key”. I wrote back to re-explain” my problem and they replied with “yeah we don’t sell any parts like that.
Thanks. ” So here’s the bottom line- if you break Thules crappy key in the lock you are on your own so be careful. Or buy a box from another company.
I got this the Pulse M off REI in summer of 2020 when there wasn’t anything to do since everywhere was in lock down on a memorial day weekend sale and love it. I drive a 2018 limited impreza hatchback with the subaru crossbars and it fits the car very well, and looks great.
It nearly goes the width of the top of the car and still looks streamlined – I wouldn’t suggest going with a cargo box any bigger than this for a similar sized vehicle. We have used this a lot for out of state road trips mainly on weekends and holidays with 2-4 people and it stores a lot more stuff than you would think.
Even trips to Costco, it comes in handy for those big bulky paper products. I store it for the winter as we aren’t traveling as much during that time. Great box, never had any issues with it and stores a ton of stuff to leave room inside the car for coolers, food, bags with electronics, etc.
Conveniently haul equipment, firewood, coolers, camping gear, deer, dirty sports equipment, and much more with a lightweight yet strong hitch mounted aluminum cargo carrier – An all-around great deal! Each hitch carrier is designed to work with 2″Class III/IV hitch receivers recessed up to 7″measured from the center of the hitch pin hole to the vehicle bumper.
Easily haul items outside of the car with a bumper cargo carrier and save valuable room inside. Features a large 47. 375″L x 20. 5″W x 5. 875″H usable storage area for carrying a variety of gear. (2) Rear red reflectors on the back of the hitch carrier add safety at night and low-lit conditions by helping other vehicles on the road see the carrier edge.
Includes an anti-tilt bracket for hitch stabilization and a 5/8″hitch pin. Made with durable, all-Aluminum construction. Some assembly is required. Age Group: adult.
Received the Al Cargo Carrier right on time for planned fishing trip. All parts were included and spent about an hour assembling. The instructions were easy to follow. I also purchased the trailer hitch riser to gain 4.
5 inch ground clearance. With a 60 lb loaded cargo container on my first trip, the system worked very well. I would recommend this purchase.
You can spend up to $600 for a paramotor carrier that you will still have to modify or less than $100 for this. It works perfectly! I have it set up so I can can a Air Conception Tornado 280 paramotor with a 150cm hoop, two 5 gallon containers of gas, my windsock pole and a toolbox.
It is stable and rock solid when attached. Highly recommended!.
I am very pleased with the cargo carrier it will be very handy when I go on my trip. It was very easy to assemble and the weight is nice and light. I put it together with it installed on my hitch so I would not have to do it on the ground, I have a additional attachment that raises the carrier up another 4″ so it will not hit the ground if going into low lying areas.
I left some brackets loose before I tightened all of them up at the end of the install. Also the price was very good with the discount.
Whether you use it for camping, moving, or to carry your game, the Guide Gear Cargo Carrier has you covered with up to 500-lbs of carrying capacity. Attached to a 2 inch Class III receiver hitch, it takes only moments to install and get ready for loading.
The aluminum frame is rust and corrosion resistant and the 4. 5 inch high rails give you ample places for tie-downs to secure you load. The spacious 53. 25 inch x 19. 25 inch platform gives you more than enough room to haul all your important items, or to move your brother-in-law into his fifth apartment.
No matter how you use this Carrier, you know it’ll always provide year after year of carrying support. Ultra-light aluminum construction Rust and corrosion resistant Raised side rails give you multiple tie-down points Hitch pin not included Platform measures 53.
25 inch x 19. 25 inch x 4. 5 inchh. Weighs 15 lbs. , 3 oz. Load up and order today!.
I had to replace another carrier that got demolished after backing into my Wife’s car, since the corners were just plastic and broke, so I wanted to find a carrier that was not held together with plastic corners.
This seems well designed, and was easy enough to assemble. I replaced the cheap steel bolts with stainless steel. The main shaft is steel, which I wish was a solid shaft of aluminum in stead, so I don’t have to deal with rust stains.
This is light enough to manipulate easily, where all steel carriers weigh at least twice as much. Although this wound up being way too small for what I need. The listed measurements is the outside of the cage, so the inside is only 17″.
My plastic miter saw box is 19″. I may be able to use this for other cargo, but not for what I need this for most. I see others had listed how these seem to need a bolt on clamp to keep it from wabbling too much.
Which defeats the benefit of this being easy on and off. I had wrapped the shaft with a thin stainless steel sheet metal to take up the gap, and have not had that problem.
Hands down this is the best purchase that I have ever made through the Sportsman’s Guide! The assembly was straightforward and simple. All the holes lined up perfectly. The key is to put all bolts through the holes before tightening.
It is super lightweight yet rugged, without the rust. Super easy to hook up to your vehicle. My wife loves it because I don’t have to put garbage bags in her car to go to the dump. They bungee to the carrier nicely with infinite attachment points.
Now I don’t have to hook up my utility trailer just for a few items. This is perfect for transporting a few heavy soiled items to and from camp. I think I will add reflective tape around the outside of the rails to make it more visible.
The dull aluminum color is almost invisible. Perfect item at a perfect price. I’ve been a customer for over 20 years and this is the first review I have ever written.
This thing was a lifesaver for us vacationing with 4 kids and limited cargo space. Quick and easy assembly and held double stroller, cooler, pack-n-play etc so we could keep luggage inside the vehicle.
And should double as a great deer hauler this Fall! Very pleased.
Features: – Free up more space for your friends and family. – Keep wet and dirty items from getting your vehicle muddy and messy. – Sturdy steel construction with a corrosion-resistant black powder coat finish.
– Simple & easy bolt-together assembly. – Mesh floor is easy to clean. – 2″ Angled shank elevates platform for better ground clearance & less fumes and exhaust hitting your stuff. – Folding design allows carrier to be tilted up alongside the rear of your vehicle when it’s not in use.
What’s In The Box: – Hitch mount cargo carrier. – All hardware included such as nuts and bolts and reflectors – minor assembly required (tools not included – Comes with an abrasion resistant heavy duty vinyl waterproof cargo bag & a cargo net to help secure your things during transit.
Specifications: Dimensions: – 60? long x 20? wide x 6? tall – Package Size: 31? X 22? X 9. 5? inches. – Weight: – 54 pounds Mockins.
I usually purchase items based on functionality and value. This hitch carrier set provided the extra room I needed for my camping trip, at a reasonable price. Customer service did take more than a week to respond, but addressed my issue promptly afterwards.
My carrier bag came with 6 tie-down straps, of which one was defective. I guess being a small business they don’t carry spare parts around so they sent me a new bag set, and said I can keep the old one.
The carrier can fold up when not in use; however, you likely will need some tool around to knock-loosen/insert the pin each time as the holes may be slightly off alignment once installed. I don’t believe it’s design-flaw, but more so needing tight fit so the hinge doesn’t create more shaking.
A better installer maybe able to align them better than I did. I have a Lexus NX300 and the rear hatch could not open pass the carrier when folded up. Some cars may make it but I’d imagine a majority won’t.
The hitch connection stabilizer was difficult for me to install and I am not sure I did it correctly but the carrier wasn’t rocking while I drive. Could be the instructions or could be user error. I’ll check again next time.
The 2 included tie-down straps worked well and I secured the bag to the carrier with no issue. People with steep driveways should load/unload on the street. Fully loaded, the car rear drops inches so any sizable dip will cause the carrier to touch and drag on the ground.
We found the Mockins cargo carrier to be sufficient for our needs on a recent trip from Tampa, Florida to Austin, Texas in transporting various items weighing approximately 200 lbs. This freed up space in our vehicle making the drive more enjoyable because we were able to stretch out in the back seat.
Our items were secure and protected from the elements. We would recommend this item to anyone with a similar need.
Received it in 2 days b/4 Thanksgiving. Great cargo basket that didn’t rattle while driving 1600 miles on the 1st trip. I used the hitch stabilizer, the bag, and straps. it kept everything secure. a regular sized cooler fits in the bag plus some luggage.
The bag is very thick and kept everything inside dry and clean.
Arksen 60 inch inch foldable hitch mounted cargo basket. Durable carrier that is built to last and features a black epoxy powder coated finish protecting it from from rust, road grime, and the elements.
It is constructed with a steel mesh surface, 6 inch steel tube rails, and a heavy-duty 2 inch steel hitch tube, which fits into your hitch receiver. Use it to haul coolers, boxes, tools, firewood, and other gear.
It also features a pull-pin design to conveniently fold up and out of your way. Features: Great ideal for hauling extra cargo bags, camping equipment, luggage and more Perfect for long road trip with a large group of people or friends Extra Large size and capacity compare to others Mesh Surface Prevents smaller objects from falling through Constructed with a steel mesh surface, 6 inch steel tube rails, and a heavy-duty 2 inch steel hitch tube, which fits into your hitch receiver Hitch basket will fit trailer hitches recessed up to 7.
5 inch (measured from center of trailer hitch pin to the end of bumper) Each net with hooks comes with a storage bag so users can store the netting under the seat, in the trunk or garage Strong elastic Tangle-Free mesh, wear and tear resistant, bearing up a huge tensile force, perfect fits to your vehicle’s existing luggage rack attachment points **Does Not Fit Convertibles** Specifications:
I purchased this to carry a Gorilla Cart pull cart that weighs 75 LBS. or Less. There is too much slop in the design and it sticks out too far. The straight design is inferior and with weight added, it sagged after one use.
I should have known it was too good to be true. Off to our local welding shop for modifications to correct the problem.
Product came in a box that was open and water had gotten to the metal small amount of rust was the result. Additionally the predrilled holes did not line up and required a lot of prying to get them to work.
After all was done the carrier was OK just needed a little more quality control.
Ordered this on a Thursday morning and received it today ( Friday ). Quality is amazing. 8 bolts and its put together. Seems very well built and a great value for the money. Would definitely recommend.
Get extra cargo space with this sturdy aluminum cargo carrier attached to your vehicles hitch receiver. The cargo carrier is easy to assemble and holds up to 500 lb. with a Class III receiver. Rugged, extruded, anodized aluminum construction provides added durability.
Thinking of buying another one for my truck! I put a hitch on the front of my truck (2014 F150), a while back for this unit. However, I used the ‘back porch’ on the rear trailer hitch numerous times before with zero issues, probably has 10,000+ miles on it! Assembly was a snap, no issues, take your time.
My setup worked very well on the front of my truck. The only two addition I made was, I added some red reflective tape on the aluminum side and rear rails for safety and I mounted (2) 1/2-inch x 30-inch white PVC pipes on the two forward corners (or rear corners if using on the rear hitch).
I topped them off with 1/2-inch red reflective tape on the tops, so I have an idea where the porch extends to while navigating thru tight places. As for securing any tie downs, I use the bottom side rails or cross members to attach the tiedown/ratch hooks to, you don’t need any tie down points.
I’ve had about 200+ pounds (full tote or cooler) each time traveling and had zero issues. As for some occasional ‘rocking’, I use a plastic door shim (for installing wood framed doors), to snug things up if need be.
We are going to our Florida Keys home from New Jersey in about a week and plan on using the ‘front porch’ to carry a concrete firefighter yard statue, about 200+ lbs. on the front hitch to bring down the trucks nose and even out the trucks load as the rear bed will have a good half ton of ‘Jersey’ topsoil, (for tomatoes), tools, materials, etc.
Yup, I’d recommend this product. Infact my oldest son has borrowed it numerous times with absolutely zero issues. I think for the money and quality and light weight, you can’t beat it! BY the way, if you take your time when assembling anything in fact, you’ll find the assembly will usually go well and also when using the item, the use common sense will go far.
This is perfect for what I needed and you can’t beat the price. A little bit tedious to put together but just because all the vertical pieces need to be attached from the bottom platform to the top rail (36 small bolts & nuts) but not that bad.
Once everything is tightened the product becomes very rigid. The receiver is a little wobbly in the hitch up & down and side to side (which most are) which is fine when pulling a trailer or boat but not for a platform.
I added (shoved) 1/16″ plastic shim material to the top and one side and that mostly corrected the lean and wobble. I might add it needed to be manufactured slightly undersized to enable it to slide in easy because just a 1/16″ shim makes it a little harder to pull out (that’s why I add them after it’s in the hitch.
Without the shim the movement is about 1/8″ at the hitch but the “play” at the basket is exponential so more like 3/8″ wiggle. I might try wrapping the hitch end with aluminum tape until I create a better fit and cutting a hole for the pin – Overall I love it.
Keep a rifle clean and in good working order with the Real Avid AR-15 Scraper. It is an easy-to-use tool that offers a quick method of cleaning the bolt carrier group. It removes heavy, baked-on fouling from 12 critical bolt carrier group surfaces faster and easier than brushes and solvent alone.
Its versatile design allows it to be used on all four major parts of the bolt carrier group, letting he bolt, firing pin, bolt carrier and bolt cam pin be cleaned more quickly and efficiently. The swivel cover protects your hand from the double-ended scraping edges.
Made from non-hardened stainless steel, this bolt scraper is a durable and reliable tool. It makes a useful addition to any workbench, cleaning kit or range bag. It is suitable for use with a variety of AR-15 models, keeping them operating and firing reliably and smoothly.
Built a 1/2 MOA AR 15 for a female friend who is an excellent shooter and am teaching her proper maintenance which includes proper bolt cleaning and service. This scraper provides all the services necessary to keep things running with utmost efficiency and accuracy.
Keeping it clean means collecting money on bets for one shot golfballs at 100 yards from Miss Stacy.
AR’s crud up fast. When they crud up, they don’t work. This tool helps keep it clean. Clean mine often enough that I have never had any serious carbon “caked up” on it, but this scraper fits the parts so closely that you actually do 2 things at once, you clean the part, and you can judge wear or damage.
The Apex premium aluminum hitch cargo carrier has a large 60. 25 in. L basket designed to efficiently haul equipment on the back of your vehicle. Featuring a built-in 58 in. L x 29. 5 in. W ramp that folds flat into the carrier for quick, convenient storage, the ramp can also be positioned vertically for added security while transporting your equipment.
Compatible with class III and IV hitch receivers, this cargo basket has a large 500 lbs. weight capacity. The basket and ramp come fully assembled, so installation takes less than 15-minutes. This carrier also features multiple tie-down points for securing your cargo.
Exceeding your vehicle’s hitch rating may result in failure of the device and personal injury. Color Metallic.
This review is for the Apex Aluminum Tray Premium Cargo Carrier with Ramp (Item: ACC-500) After reading some of the other reviews I was a bit hesitant to purchase this item and only did so with the intention of having to customize to add strength.
I use this hauler to transport a 330 lb standard size snowdog and have about 350 mi on it. Here are some of my observations: + This is a large carrier, but I can still manage to get it on the Hitch by myself.
+ There is about a foot of space between the carrier and truck. Enough to let the tailgate down all the way without hitting. This is on a tacoma, your experience may vary. – The floor supports give a little when walking on them and does not inspire confidence, but seems fine for the snowdog which has it’s weight spread out.
– When loading, the carrier does tilt to the side, but I have not noticed any permanent deformation yet. I use a couple of 2×4’s for support now when loading and unloading. + The carrier main 2″ tube is reinforce and has an S bend in it which has not shown any signs of permanent deformation yet.
– The struts on the truck have problems rebounding fully in cold weather, but that is not a reflection on the performance of the carrier. All in all a pretty good carrier for my use. I took away a star for flimsy floor support and lack of support on loading side.
I did not find the directions easy to follow. The directions should be a bit more explicit and right under the corresponding pictures. Make a deal with a middle school to have kids put a ramp together following your descriptions.
One middle school in (I believe Hartford CT) does that. The pin that should secure the ramp when it is folded up, does not reach the hole. I use a small bungee cord to decrease the occasional rattling.
When the ramp is folded in and the carrier and ramp are folded up, they block the view of the brake lights and turn signals. I had to go to a U-Haul station to improvise lights under the ramp that will show when the ramp and carrier are folded up against the car.
When I move from my drive way to the street and V. V. the ramp scrapes on the street, when it s loaded with electric trike and regular bike. I have no space to store a small trailer, but otherwise that would have been better.
While this ramp appears well-built, it lacks some clear necessities: There is no clear way to secure the ramp to the deck while in the raised position. Nor is there a way to prevent it from wobbling back and forth in this position.
Additionally, when in the up position the ramp blocks view of the license plate and the brake lights. These factors mean I cannot leave the ramp attached to the vehicle when not transporting my scooter, making it necessary to re-mount and un-mount it when I need to transport.
So I cannot give this product better than 3 stars, sorry.
Boasting an impressive 550 lb. weight capacity, this premium cargo carrier from Elevate Outdoor is ready to haul your extra gear for work or play. Its lightweight aluminum construction is perfect for one-person installation; just slide it into a Class III or IV hitch receiver and it’s ready to use.
The versatile slatted design provides multiple tie-down points, making it a breeze to attach coolers, lawn equipment, hunting gear, and more to this flexible and durable cargo carrier.
Transport small equipment with the Apex Hitch-Mounted Utility Carrier. Designed specifically for carrying small equipment like lawn mowers, power equipment, and snow blowers, this 500 lbs. capacity carrier features durable steel construction, with a black powder-coat finish.
Compatible with Class III or IV hitch receivers, this hitch-mounted cargo carrier is a useful tool for hauling equipment between worksites. This carrier also includes an integrated 42. 5 in. L x 30 in.
W loading ramp which folds down for easy loading, then folds back up and locks in place after use. Made from heavy-duty steel with a protective black powder coat finish, the specially designed mesh surface allows dirt and moisture to easily pass through the carrier, eliminating build-up.
Assembly was pretty easy. Directions just ok but not much to put together. Hitch stablizer a bit wonky. At least on my Jeep JL it does not bite enough of the receiver to make a difference. Additionally, if you plan on using this for a 2018 Jeep or newer, it will not fit without taking the spare tire off.
Jeep lowered the spare tire in 18 to give more rear viewing. Not sure about a JK. Without a stablizer there’s some Yaw in the carrier even under load. All that said it came packaged well with all the necessary hardware and I’ve used to run some lawn equipment back and forth already including a rather heavy snowblower.
For the price, the ramp is a good buy and will do the job I need – moving around lawnmowers and snowblower. Generally a good quality product but there are issues with the hitch stabilizer I received with it.
If I had to do it over again, I would upgrade to a better model with more ramp options. But again, for the price, it’s a nice buy.
Received my Steel Basket Utility Cargo Carrier today via UPS. Shipping container was double boxed for extra care in shipping for a 5 star rating. The carrier goes together rather simply and I had it ready to use in less than 20 minutes.
Mounted the unit to my 2013 Ford Escape with a factory installed 2″ trailer hitch. Backed my 26″ Ariens snow thrower up the ramp and onto the unit fairly easy. Once on the carrier you need to center the weight to avoid twisting the carrier.
I tied the blower down with cargo straps and gave it a test drive. Very little movement of the cargo carrier and performed as expected from the previous reviews I have read. I do like this unit as it uses 3 stabilizing bars for support to help maintain the cargo carrier level.
This deluxe steel cargo carrier hauls oversized items or items up to 500 lbs. behind your vehicle. The cargo carrier is easy to assemble and conveniently fits all standard Class III / IV 2 in. receivers.
Heavy duty tubular steel construction and rails on all four sides provide maximum stability during travel.
Purchased this for a 2017 Jeep Grand Cherokee Trailhawk. Assembly took under 30 minutes. I read some reviews where the alignment of holes are a concern. I did not see this issue, there was some adjusting to get the bolts through however not something I would require to re-drill or bore them out.
One assembled installation took about 30 seconds then off we went. What an affordable and beneficial addition to an SUV! I stood on this for a while to set up my roof racks also. not wobble or issues.
Finish is good, fit is good. I would recommend. FYI, the assembly instructions are a bit misleading, you can’t rely on the 2 cross/connecting channels to align the rack, you need to lift each side a bit until the holes line up then feed the bolts through – that should help.
You would thing that assembling on a flat surface everything would line up but seriously for this price do you expect and +/-. 005 tolerance?.
Purchased this for a family camping trip after realizing our SUV was going to be at it’s limit space wise. Got it assembled in about 5 minutes. Only recommendation is to use blue loctite on all the nuts.
Yes they have lock washers and secure nuts, but a little blue thrown in there before tightening and this thing is rock solid! Only complaints are the paint isn’t as durable as I’d like. First bungle strap hook left a decent scratch that went right to the metal, a nice place to start to rust.
Nothing that can’t be touched up easily, but still bothersome. Other complaint is the same for almost any hitch basket, it wobbles once installed. I’m sure a tightening sleeve would take care of it but it’s not too bad.
I would gladly purchase this again and highly recommend it.
Here’s what I like (after my 650-mile test run). 1) it worked as expected 2) I could not see any wear-and-tear on it (still looks pretty sharp!) 3) It wasn’t that expensive Here are some things I’m neutral on: 1) the price – a couple of days after I bought it, I found a similar unit that could double as a roof rack at NAPA for the same price! I thought that the price from Harbor Feight would have been noticeably lower than elsewhere 2) the dimensions really didn’t align well with the plastic totes from Home Depot, Costco.
It would be cool if H. F. sold totes that would fit in these dimensions 3) it did wobble in the hitch, but not so much. I thought it would be worse on the road, but it behaved surprisingly well. 4) general warning – my friend had one of these and it sat right next to the exhaust which melted some of the things he was carrying.
My car has a downward facing exahust and everything that I was carrying was fine – so, make sure that your exahust doesn’t hit the stuff you are carrying.
Tow Tuff brings you the TTF-2260A Aluminum Cargo Carrier to take care of all of your hauling needs. Easily attach this carrier to your vehicle with the Class III receiver that fits any 2” receiver. The 500 lb.
capacity ensures that you can carry a large load with this Tow Tuff product. The cargo carrier bed measures 60” long x 22. 5” wide x 7” high, making it the ideal size for hauling a wide variety of items.
Designed with a 1 pc base for convenience, this cargo carrier is easy to assemble so that you can put it to use right away. At only 37 lbs. , this product is constructed of aluminum for a lightweight, yet durable cargo carrier.
The cargo carrier resists corrosion to last even longer. Haul everything from camping gear to sporting goods with this Tow Tuff product.
I purchased this cargo carrier for our SUV to be able to take coolers and storage totes to our camper. Positive: Lightweight compared to the steel ones offered, sturdy construction, no issues with assembly, no missing parts.
Negative: Total of 44 screws, nuts & bolts to assemble, wobbles from side to side when installed although this shouldn’t be considered a defect since I have other hitch mounted items that do the same thing.
Could use some screw eyes on the rails for tie down points, I’m going to add some, they are not provided. Summary: A power screwdriver or impact gun saves your wrist when assembling, the instructions aren’t the greatest however it isn’t very hard to figure out where everything goes.
Seems well built and sturdy. Does take some time to assemble with all the included screws and parts. Having an electric screwdriver helps a bit. Doesn’t come with an Allen wrench for the screws that attach the tray to the hitch.
Came damaged so that was disappointing. Assembly was far more difficult than anticipated. Directions weren’t the greatest. But it’s light weight. Wish it had options for lights as it’ll block my tail lights if I stack anything.
Lastly I had to get straps and cut them/use bunny cords as longer straps simply bind up if you try to feed them threw. Would be nice if their was some d rings or slip points for strapping things down.
I ordered two of the same part numbers, but got two different nuts labeled with the one I ordered. One took a 32 mm socket and the other took a 36 mm socket. I had ordered the 36 mm parts under a separate part number, but that order was canceled saying the parts were not available.
The 32 mm part was dirty and I initially thought it was used. It had small specs of rust in the threads. The order was filled and shipped promptly.
I bought these spares to repair my Ampera in UK – quoted lead times in EMEA are LONG. these guys shipped out the parts , well packaged. I didn’t ask for priority shipping – total time door to door was six weeks or so.
Worked for me! I’ll be back for more – Thank you!.
The handle is well made (metal) like the original. The only issue was that the arm that is connected to the door latch rod rubbed against the door. I had to bend it 3 times to get it out far enough. Works great now.
Based on the SOPMOD designed bolt upgrade and rebuild package, this kit is designed to breathe new life into your bolt assembly. The bolt assembly is the heart of your AR15 rifle system and preventative maintenance used by professions insures these systems keep running even under the harshest of conditions.
This is a great spare parts kit to keep your AR15, M16, M4 running in the field.
You can always count on quick shipping here. Thank you. The BCM bolt upgrade kit got here a day early. What can I say, it’s a bolt kit that works every time. I always look here first, Thank you for awesome service.
Your Bolt Carrier Group is one of the most critical parts of your build. Dont buy an imitation. This is the Spikes Tactical BCG with Nickel Boron Coating. Features : Nickel Boron Coating Inside and Out (Bolt, Carrier, and Gas Key) Laser Engraved with ST Spider Logo.
Designed to meet and exceed the needs of Military and Law Enforcement users alike. This high-quality plate carrier provides load-carrying capacity in a compact and lightweight package. Covered in PALS (patch attachment ladder system) webbing, the compact Banshee is built for utility and mobility.
Ideal for high-threat active shooter situations, Multi-Assault Counter Terrorism Action Capabilities (MACTAC) and counter terrorism direct actions. The front and back feature 5 rows of PALS webbing and two 2″ rows of loop sewn on for flags and other identifiers.
The front and back of the panels of the carrier on the body side are also padded. Rifle plates are loaded from the bottom front/back and secured with a hook/loop closure. A removable, fully adjustable cummerbund runs through the carrier and has PALS webbing on the interior and exterior to accept side plates or other pouches.
Also standard is a secondary nylon strap system with quick-release buckles (also removable) if the cummerbund is not needed. The front pocket of the carrier has a hook and loop kangaroo type pocket to allow for accessories.
I first purchased the Shellback Banshee 2. O plate carrier with hesitation due to a few other high end carriers I have owned and used or was in the market for. I needed it to fit like a glove and some plate carriers and do not have a true universal fit.
I am 5’7 and a 165lbs. I also needed a slick and slim profile but not so slim I lose precious utility space and even comfort. Comfort is huge and It’s very comfortable. I needed it to be tough as heck to withstand drags against dirt, possible rock abrasions, etc.
I am able to get all this in the Banshee 2. 0. It can adjust to a very slim person, my wife is 110lbs and slim in which this just fits perfectly tightened down all the way. She looked super hot in it.
😉 The bonus and over the top features are such: 1. Great ventilation and padding makes it very comfortable. 2. Built in mag pouches for both pistol and rifle mags. 3. Built in pockets at top both front and back.
4. Extra retention under the cumberbun. 5. Ability to take Sappi,s or steel plates and fit snug. 6. Slim profile yet built with integrity and for durability. I did notice that the laser cut webbing on the shoulder straps are very tacky and really helped give me a great purchase when shouldering my rifle.
Just another bonus to add. If these points of necessity are shared then you will not be dissatisfied.
This bolt carrier group for AR-15 style rifles meets or exceeds mil-spec. It has a black nitride finish which not only resists corrosion but reduces the need for lubricants. The carrier is case hardened 8620 steel.
The bolt is true mil-spec dimensions and made of case hardened 9310 steel. It has been magnetic particle tested and undergone a high pressure test The 4130 steel gas key is properly staked. Specifications and Features Odin Works AAC-6.
5-BCG Meets or exceeds mil-spec 6. 5 Grendel Case hardened 8620 steel carrier Case hardened 9310 bolt MPI and HPT tested 4340 steel extractor, manganese phosphate coated Hardened 4340 cam pin 4130 steel gas key, properly staked Black nitride.
BCG components are NiB-X coated and polished to reduce fouling adherence. Coating is guaranteed for life against chipping” spalling or flaking. Over 30K rounds in Government protocol endurance testing did not wear the coating off.
Especially beneficial in short barrel setups and suppressed platforms.
The bolt carrier group is the heart of any firearm, and the 556 is no different. It is responsible for housing the bolt and ensuring that it is properly lubricated and protected from the elements. It also ensures that the firing pin is properly aligned and that the extractor is functioning properly.
The bolt carrier group is what makes a firearm function, and it is important to choose one that is of high quality and that will function properly in your firearm.
Body pillows for stomach sleepers are designed to provide support for the stomach and lower back. They are typically longer and thinner than other types of body pillows, and they can be positioned in a variety of ways to provide the most support for the sleeper. Some body pillows for stomach sleepers are specifically designed…
Some popular books that have been known to provide motivation for readers include “The 7 Habits of Highly Effective People” by Stephen Covey, “The Power of Positive Thinking” by Norman Vincent Peale, and “The Alchemist” by Paulo Coelho. These books offer insights and guidance on how to lead a more successful and fulfilling life, which…
There are a few different types of bike seats for big guys, but the most common is the wide seat. This type of seat is designed to provide more support and stability for larger riders. It is also generally wider than a standard seat, which can provide more comfort for riders who are carrying a…
The belt for the Can-Am Outlander is a part of the machine that helps to keep it running smoothly. The belt is located under the hood of the machine and helps to keep the engine running by providing power to the various parts of the machine. 20 Best Belt For Can Am Outlander 1. C4…
Iron supplement for hair loss can be used to correct iron deficiency which is a common cause of hair loss. It can also be used to improve circulation to the scalp and encourage hair growth. 20 Best Iron Supplement For Hair Loss 1. Natures Truth Iron, Ferrous Sulfate, 325 mg, Coated Tablets – 120 tablets…
The hunting caliber for 300 yards is a rifle that is able to shoot accurately at that range. There are many different types of rifles that can be used for hunting at this range, but the most important factor is the ability to shoot accurately. Many different calibers of rifles can be used for hunting…