20 Best Belly Band Holster With Kydex (2022 Updated)

Not sure how to write this but here goes. I purchased this for my Kimber 1911, my thought was because I like to wear shorts a lot that maybe this would be an easier way to conceal carry with my shorts on.

After I received it, which was flawless (no issues with shipping), I tried it as I was waiting and anticipating it being my saving grace. The first full day of wearing it was not bad at all. It took some getting use to, meaning wearing what felt like a girdle, but not bad.

After the first week I started to notice that my weapon was starting to slip down further and further. I was constantly trying to make adjustments so that it would sit comfortably. Not the case. I finally decided to take off the belly belt and take a look to see what the issue was.

Low and behold the elastic that keeps everything tucked in all nice and neat the first week was losing it’s elasticity. Now I just had a belly band as I try to find another way to carry conformably in my gym shorts.

All in all, my one star is because the description says this is for ALL gun types but that is not the case. If you have a smaller gun this would be perfect.

I initially planned to return the belly band for the following reasons, but eventually decided to keep it to try to make it work for my Kimber Micro 9. The band is six inches wide, which makes it feel more like a girdle than a comfortable concealed carry option.

The band is for left-handed people because it fastens in the back for right-handers, which is very inconvenient, and too difficult to fasten both ends securely. The weapon pouch is too big for the Micro 9, making a quick draw somewhat awkward, since the pouch covers too much of the grip.

The band would work better if it were 4 inches wide instead of 6. Similarly, the useful zipper pocket doesn’t need to be as wide as it currently is, unless a person plans to pack it with all the valuables he doesn’t want to leave in his hotel room.

In my opinion, the zipper pocket should be reduced in width to accommodate a 4 inch band. The gun pouch could also be reduced in width and still accommodate carry-size weapons. I am keeping the band in spite of the suggested improvements because I am going to try using it in cross-draw fashion.

This will put the mag pouch behind the weapon (out of the way for cross-draw), and enable me to fasten the band in front, which is the only convenient location for fastening. I will also stitch the gun pouch in such a way as to narrow the width so that the trigger guard is covered without interfering with the grip.

If I can’t get used to the “girdle” feel, I will give it to someone who doesn’t mind it. In conclusion, the band has potential, but could be designed more realistically.

Your Belly band is a good product. I would like to make a few suggestions to make it a great product. The material that houses the hand gun is too shear in that the trigger can potentially actuate through the holster unintentionally if something presses through given the right angle.

Please consider shoring up the trigger area with a much stiffer material. The magazine pouch does not keep the magazines in securely, because lacks retention material as there is in the gun holster. The gun stays put because the retention material sewn into the belly band does the job, I suggest the same for the magazine pouch.

I chose the zipper feature for the pocket, which I find very useful. I would suggest attaching a small zipper lanyard, because the zipper by itself is difficult to grasp and manipulate. Also I would much appreciate if the zipper pocket could be a bit more elastic so I could manage manipulating items in the pouch more easily.

Lastly I would double-stitch the throughout the belly band for durability. I have had it a short while and there is already a small bit of fray (unraveling of stitch). It is not my intention to complain, because your product is at a very good price point, and I understand in order to make the improvements I suggest would increase your production costs, however I would gladly pay more for it.

I value your products ( I own two) and you have already shown me twice that you stand behind you products no questions asked. Believe me when I say you have a customer for life. You stand behind your products and your word.

Regards, Brian.

I ordered a holster for my EDC M&P Shield Plus. Along with the holster I purchased the holster claw in order to give myself multiple options on ways to configure it to try and work best for my body. The quality of the actual holster itself is decent.

The kydex mold fit the firearm well and retention can easily be adjusted with the set screw. However, if you are planning to use this holster for appendix carry, I would probably look at other options.

Even with the claw attachment in a few different settings, this holster does not do a good job at avoiding printing. There is no aspect of the holster that pushes the handle of the firearm towards your person to avoid the magazine from protruding into your shirt.

The claw itself only attaches with one single screw, which means that it can actually rotate while wearing the holster making it rather unusable. I don’t mind using it for strong side 3 or 4 o’clock position IWB carry if you are wearing a sweatshirt or flannel or something to cover the printing, but the single clip and lack of good support to angle the handle better makes this difficult for me to use on a daily basis.

Good company, good quality, not-so-great design IMO. Would not purchase again for my specific use.

This claw works as intended with a definite improvement for pivoting the holster to help stop printing of the bottom grip/mag area. I carry and use it AIWB and no doubt, an improvement. Hat’s off to the ingenious design that allows the claw to lock up securely and tightly in the desired position without increasing or affecting the retention tightness.

My ONLY complaint is the small removable pads. They are great except that small oval presents a small point of contact or “footprint” against a stiff EDC belt (I use a Nexbelt). This sometimes causes the whole package to pivot forward slightly when sitting.

I ended up using my claw without the pad, which presents a bigger/longer footprint against the belt and seems to prevent that pivot. I would love to see WTP produce a new oval that is longer, ummm maybe 1-1 1/4 inch long, rather than these little ovals.

Seems that would put a larger point of contact against a good belt.

I watched several videos on YouTube that all highly recommended this holster, in addition to wanting to support a USA made product, I bought this holster. It came in the mail fairly quickly and I tried it immediately.

Oddly enough my gun slid in with no “click”…. as can be heard with well fitting polymer holsters. I inspected it further and it was obvious to the eye that the holster was not tight around the firearm at all.

There is a large gap between the holster and the trigger guard, and the holster is not snug anywhere. With any slight tilt of the holster, the firearms slides right out…. The quality simply is not there.

It’s obvious that this holster is a dud and the QC department missed it. The return policy says 100% guaranteed, yet you have to pay for shipping to get a refund. I believe that if the company sent out a poor quality product, they should cover the cost to retrieve that product.

Previously, I was not a regular concealed carry person. I am in my 60s, overwight and the most comfortable way to carry was OWB which was concealable in winter outside but not so much indoors. I saw the ComfortTuck on youtube and decided to give it a try.

I ordered one for my M&P Shield. I received it in about a week, put it on at the 4-5 o’clock position and wore it comfortably the first day. I now conceal carry at church, shopping, driving in my truck, and pretty much everywhere except when I am working out of my home office.

By having a quality gun belt, and pants with a waist size 2 inches bigger than normal, I can wear the ComfortTuck all day. I also turned around a purchased another for my CZ 75D PCR Compact. This is a much heavier gun but I can still wear it all day, although I will say the shield is much more comfortable due to the much lighter weight, but both work fine.

As we come out of Winter in Missouri this will be my main carry option until winter comes again. I am very happy with my choice.

High quality materials are used throughout. The leather against your body gets more comfortable with each use. The comfort leather shapes to your body. The holster grips my Masada and holds it in place even in a run.

I am a bigger dude and have tactical love handles and I wear this at my 430 position. The pistol is quick to draw. Even with the combat cut to give you a dater draw the pistol doesn’t touch your skin.

One of the other great features I tried out was the adjustable clip height. You can lower the holster position to bring the pistol grip closer to your belt. I could super conceal my full size pistol by using the adjustable clips.

The more I lowered it the harder the draw. So I adjusted back to the best fit where it offered the best draw and concealment. I highly recommend this holster for EDC. I WILL 1000% recommend Vedder. The fit and finish, ingenuity, use of high quality materials there is really no better choice.

Have been wanting to get the Rapid Tuck for quite a while since I already have two light tucks that I am extremely happy with. But unfortunately it arrive with the wrong belt clip, it was shipped with the long clip.

Adjusted at the same position as the light tucks but when I went to draw my 365xl my knuckle would scrape the clip. Fortunately Vedders customer service is second to none, and Rachel in customer service whom I spoke to realized that the wrong belt clip had been installed and had one on the way asap at no charge.

After installing the short clip I began wearing the holster on a daily basis. I can say that this Rapid Tuck is the most comfortable holsters I’ve worn, retention for a hybrid is outstanding. I ordered the the holster with the upgraded horse hide and dark earth kydex, looking forward to years of use with my new Rapid tuck.

Would highly recommend this holster to anyone looking for a comfortable reliable holster.

Please pay attention to the photos, this is a good idea but for a cross draw holster. If you want your pistol at your 3 or 4 o’clock position, notice your magazines are behind you. Also the “buckle” connector is in an odd position.

Plenty of places to put your stuff and made well. Just be sure of what you want.

Great product. Wife packs a Ruger LCP 380 in holster. Works really well. Very well built.

Very comfortable! I actually forgot I was wearing it thank you very much this is a great product and I highly recommend it.

So far I’m happy with this holster. I’ve been wearing more sweatpants since I got it. I can see my self taking light jogs with it but I’m still a little concern that my firearm may fall since there’s nothing in place to prevent it from falling out.

It has multiple hidden compartments for extra magazines and wallet. I really like how it’s well built. If there was maybe a Velcro strap to hold down the firearm it would probably be better but then again it’s easy to access and draw if needed to.

I CCW the same firearm in the picture, a Ruger LC9s. Anything bigger than that may not hold as well, feels like anything within that size range is ideal for this holster! I love having multiple alternatives to CCW so this is a must, specially for sweats and shorts!!!.

Let me start off by saying the customer service is excellent. I placed an order for the belt/holster and an extra magazine pouch. After about a week still no package, I reach out to customer service.

They verify a couple details and confirm through shipping updates that it had been delivered. I was unable to locate the package anywhere on my property and was positive it had not been delivered so I anticipated a long drawn out debate with customer service before having to order a second one (I really wanted this holster).

The next day I received an email stating that a replacement had already been sent out to me and if the original order showed up that I was not obligated to return it. About another week and the package showed up in my mailbox.

The quality of the holster seems to be good. The Velcro is strong and the belt has a little elasticity to it. I have only carried my Glock 19 in it so far but the gun is secure in the holster. So much in fact that I am debating cutting off the leather straps to hold the gun in place as I am not a personal fan of them.

Taking into consideration the price and quality of this belt, this is an obvious 5 star rating for me. Even if it only lasts a year before the Velcro or elasticity begins to go, it is well worth it in my book.

I will certainly be a repeat customer and refer this to my friends and family.

Wow you got me as a customer and will definitely recommend your company to everyone. Not only did you response with in a couple of hours on a Saturday but my replacement item was deliver the next day (Sunday) without hesitation.

This is a plus for Customer service at it’s Best. Please keep it that way because we need more companies like yours. You will get a 5of5 star review from this guy for sure. As to the “Belli holster” I ordered the large and it was to small had to ask for a the XL (see top ref) I’ve used it since getting it and is very comfortable without been noticeable.

I do wear a undershirt with it cause it’s very hot were I live in Florida and like to keep the sweat off my body. I strongly recommend this item to anyone and this company because of such Great customer service! Thank you X 3 Art S.

This is a good system, lightweight, comfortable snd secure. Daily wear is convenient and easy. My only advice is improvement of the the retention strap. It is a one size fits all approach, which does not allow for a very secure hold upon small frame autoloading pistols.

It is not so much a matter of an insecure pistol as the weapon is held snugly in it’s pouch by the elasticity of the belt itself. It is more a matter of an insecure floppy snap device that becomes easily unfastened.

I’m wearing it every day in my machine shop, where it keeps my weapon out of the way of machine tools and allows for safe carry of a weapon all day long. It rates a 9 out of 10 with me, it’s good product.

I have been a quality leather holster guy for 40 years. I took a class that “suggested” a plastic holster with positive lock. I borrowed one and the only thing I liked was the easy re-holster. It looked and felt like two sheets of plastic melted a bit to sort of fit the gun were riveted together and cut out on a band saw with some belt slots as an afterthought.

Pressure from two screws going through some sink washers provided “the fit”. I got the Rounded ad and saw the OWB model for Glock 43. It looked more holster like and was cut and finished in a professional manner, not to mention some adjustment for ride height is available at the belt loops.

No 6-9month wait, price was right so I ordered and added a mag pouch. It would have been a 5 but belt loops were a bit to short to pass my belt and required a few minutes work to adjust. Other than that I’ve carried my EDC pistol in it daily since I got it and It’s comfortable, a simple untucked shirt hides it well and the gun draws and re-holsters with a positive click and I’d never be concerned it would come out unless I wanted it too.

All around a well designed and built holster. Price and delivery certainly reasonable. I might “need” one for my G19.

I received my holster within a couple of days, very fast delivery. I was very eager to try out this holster for my Glock 48. I attempted to holster my weapon, but it was a very tight fit. It did go in, it did fit perfectly, but it was extremely tight.

When I tried pulling it out of the holster, the gun literally felt like it was stuck in it. The finish on the outside of my gun was scratching off! I thought this was happening because it was new, so I tried to loosen up the holster by keeping the gun in it overnight, but the next morning, the grip was still too tight for a clean pull from the holster.

I called customer service about this problem and asked if there was a way to adjust the trigger guard retainer, and he said no. It was only adjustable on the inside the waistband style. I was highly disappointed because overall I really wanted to like this holster.

I do have an IWB from them and I love it! Works great! But the OWB holster is a one size fit all with no adjustment fit an easy, less resistant unholstering. I’m considering returning it and searching elsewhere for a better product.

I can find nothing wrong with this holster. Well made, perfect fit, perfect cant and at an excellent price point. I never expect products to be as advertised, I’ve been disappointed and frankly ,angry more times than I can count.

This is not one of those times. I will be purchasing more from this company for my other firearms. I am an experienced shooter, with many years behind me. I own a lot of gun leather. I think this is one of the few that I wouldn’t change a thing on.

This is easily the most comfortable IWB I’ve ever worn. EASILY. However, it has some issues. The first is that it’s difficult to put on while I’m standing around in my office getting dressed in the morning.

Trying to do so while confined inside my car after leaving a nonpermissive environment is out of the question. The suede side is just too coarse and will not slide over my undershirt or underpants. The other issue I have is retention and insertion.

When reholstering, the back end of the slide lock would initially snag on the outside of the channel, and the lack of positive stop makes me feel like this is bottomed-out, even though it’s barely in the holster.

I used some application of heat and a stainless steel rod to flare this portion a bit, which handily solved the issue. With retention, the gun just doesn’t feel like staying in the holster. There’s no active retention and I can’t really feel any passive retention.

I get that the CZ75 design doesn’t lend itself well to rotational stability without something butted right up against either side of the trigger guard, but even after adjusting the shape of the inward bulge by the trigger retention area, it still doesn’t quite want to hold onto the pistol.

At this point I’m holding onto it with the intention of using it when I have to carry for prolonged periods, or while in a more permissive environment where I shouldn’t have to worry about removing it.

**VH COMMENT** Thank you for taking the time to review your holster, we are so sorry to hear that you are not 100% satisfied with the holster you received. All of our holsters are molded to the exact gun model listed for an exchange fit.

While the hybrid holsters, with leather on the back and Kydex on the front, will not click like the all Kydex holster, they should have an exact fit and secure the gun while on the belt and up against the body.

You should not have to make any at home adjustments to the holster for it to fit properly. We are more than happy to assist in getting this resolved for you as our goal is for you to be 100% satisfied with your holster.

Please reach out to our Customer Service team so that we can better assist. Have a great day!.

Ordered the holster for my 43x. After the first hour or 2 of carrying the rough finish on the inside really irritated my skin. I emailed customer service and they requested pictures. Pictures were sent and then nothing.

I replied a few times and never heard back. Lesson learned. It’s a shame because I’ve heard good things about their holsters. They don’t stand behind their holsters, they hide behind them **VH COMMENT** Thank you for taking the time to post your review.

I am so sorry to hear about the issue you are experiencing with the leather. I do see that you have been working with one of our agents who has sent you multiple emails. We have seen that they will sometimes go to junk or spam so, you can check there for her replies.

We will have someone reach back out to you today from a different email platform to get into contact with you. All of our holsters are handcrafted to order and the leather is a natural product so, there may be some variance between each one.

Each holster should be tested and inspected before it ships out and we will certainly look into this if the leather is rough on your holster. Our goal is to produce quality products and provide exceptional customer service.

We stand 100% behind all of our products with a 30 day return/exchange policy as well as a lifetime warranty and we look forward to assisting you with this and getting you set up with a holster to meet your specific carry needs.

Have a great day!.

I had been looking at these holsters for awhile. I’ve tried several different ones but was never really happy with any of them. Finally decided to just go ahead and get this holster with the claw attachment.

This is absolutely the best holster I’ve used, so far. The fit and finish is superb. There are no sharp edges and it has a full length sweat guard. The holster is thin and compact but not cheap. The retention is fantastic.

Couple that with the adjustable ride height and adjustable can’t, you’ve got a rig that can be personalized your own way. Now. About the claw attachment. It does exactly what it says it does. It pulls the grip in tight against your body thus making your firearm virtually invisible.

I live in Florida and with the heat and humidity, I usually wear just shorts and a T-shirt. With the claw attachment, my firearm practically disappears. I would highly recommend anyone adding this to their purchase.

Since I got this holster a couple of weeks ago, I have been wearing it daily. It is, by far, the most comfortable holster I’ve used. Let me just say this. If you’ve been thinking about getting a Concealment Express holster, just get it and give it a try.

Don’t forget the claw attachment, you can’t beat it.

Hi Ben. I received my 2 holsters in the mail yesterday. The IWB holster is perfect. Just what I was looking for. I haven’t mounted my Sheld Sights, mini reflex sight on my HellCat yet but it looks like it will fit inside of the holster nicely.

I made a mistake on the OWB holster. I don’t think the one I ordered will holster my HellCat with the Shield Sight Mini reflex sight mounted to it. Will it be a problem to swap it for one that will holster my HellCat with the mini reflex sight mounted? I don’t know exactly which model that would be but I’ll take a look at the choices and see if I can pick the correct and run it by you.

Is that Okay? The H&K fits nicely in the holster I got for it. Smooth draw and secures the weapon nicely.

To start, had to wait two weeks for delivery, even though site said that holster was in stock. No response from my request of a shipping date and no return phone call. BUT, Tuckable IWB means what it says, it’s tuckable.

I adjusted the depth and cant and now I almost don’t know it’s there. I’m south paw and 6:00 O’clock carry and it rides great, even on a 100 mile road trip. This holster is all I think I will ever need for my Taurus GX4.

I live in N. E. Texas, hot and humid like what Frank H. stated about Florida, the sweat guard is appreciated. If I ever get another carry tool, I will be sure to look at Rounded holsters first.

I’ve ordered this holster with the impression that I could use it as a IWB like in the pictures, but I found out that I cannot. I’d have to buy accessories to convert it into a IWB. That information is not on the website and the pictures are misleading.

The holster is good, apparently.

I bought this and was skeptical thinking it would be uncomfortable. But I was wrong, as soon as opened this package I tried it on and completely was shocked at how comfortable and concealable it was.

Especially since the 5″ ain’t no small gun. Can’t beat the price either! I will be buying more in the future.

Very affordable holster option, and fits the gun very well. Adjustable retention is a good feature, and a comfortable carry choice.

When I need a holster which is quick to remove and or place on my belt, I go with this BladeTech Klipt. The best polymer IWB holsters for small (. 380 or smaller) pistols I have found. And so far the best bang for the buck option I can find for LCP Max.

I prefer Leather IWB over polymer, however, good leather holsters for small pistols are harder to find than polymer. I have found only one really good leather IWB holster (cozy partner for P365) which also works for LCP Max.

(But very expensive compared to the BladTech Klipt, and less flexible in placement options. ) For flexibility, this is often my first choice due to the excellent yet simple belt clip that hooks on and stays stays on.

Belt clip, very good design for a polymer clip which I like better than any metal clip holster I have tried. An adjustable cant would be even better (See Nano model). Pistol grip sits just above my belt line, easy to conceal under a light shirt.

Minimalist design allows for effective placement in various IWB body positions. Pretty simple to put on and take off quickly if needed. Clip hooks solid under belt, much better than any other clip option I have tried.

Sweat shield on this is a nice feature, and appropriately sized. Most small pistol holsters I find do not have this feature. Wish I had found BladeTech sooner. My box of misfit holsters would be much smaller.

I’ve been a Blade-tech fan for almost 15 years, the only other holster company I’ll consider for duty quality holsters is Safariland. This latest purchase was for my new EDC, a Springfield Hellcat. Selection was limited to an IWB model in black, but I needed both IWB and OWB so I’m halfway there now.

WEB sight ordering was straight forward, easy. Delivery was fast, maybe four days at most. The holster it’s self was BladeTechs high quality polymer construction. Weapon fit was perfect and adjustable.

I also got a single mag carrier, also perfect fit. The belt clip was very tight, I wear thick stiff belts for EDC. Functionality is perfect, we’ll have to see durability over the next few years. I’ve never had a Bladetech holster break, I have at least six 1911, three Sig, and another four holsters from my XDm’s and MP’s.

I bought this for a j-frame revolver, and I prefer this to my other appendix iwb holster i have, despite that holster coming with a claw for flatter concealment. The weight distribution and tension are excellent and it is indeed quite minimal.

Overall I would recommend this holster, and only give it 4 stars (5 if you normalize for price) because it doesn’t feature a claw attachment, and I can’t tuck a shirt over the holster unlike the ultimate klipt.

If the ultimate klipt was offered for my gun I would have got that instead but I’m stuck with what I can get. That being said there is a hole for mounting one on the side, so i tried a different branded claw and it fit, but not perfectly.

I went without the claw and truly this holster with my gun doesnt need it, i would just like the option.

I have two Crossbreed holsters, one for each of my P365 and P365XL. The quality and fit is excellent and very comfortable. The main reason I give them a 4 instead of 5-star rating is because I am a big person and the leather backing forms nicely to my body, but because I am big, as the leather has broken in, it has a tendency to “collapse” the holster and makes it almost impossible, if not potentially dangerous, to re-holster after I’ve drawn it.

I think if they went a little more hybrid running a full kydex holster for retention of shape and function, attached to the premium leather backing for comfort. This would only add around an eight of and inch or less to the overall width of the holster.

I do love the Crossbreed holsters, just that one fix and they would be perfect. :).

Great fit, good quality. Fit, form and function

Great holster love crossbreed for my iwb carry, comfortable and adjustable to my needs gun has a perfect fit

My amazing wife got me the pistol and the holster from Academy for Christmas one year ago, I love the Holster have been carrying it all year I have nothing bad to say about it!!! Thank you. MFT

Tight fit on either side. Smooth pull from holster. It rides good even while driving.

The holster is great, drawing and holstering is smooth, the claw works well and it does what it’s supposed to. However, the holster came in a condition that made me think it was used. The rubber bushings were worn and seemed to be sitting in a warehouse for quite some time.

The metal belt clip was scratched, fresh out of the package. The package itself was a simple padded envelope, yet I expected at least a cardboard box for the price. However, the purchasing experience was abysmal.

False scarcity marketing plagues the website. I received my 10% off promo code AFTER my purchase and received emails promoting free same day shipping for orders over %50 AFTER my purchase (over $60) as well.

It’s a real shame that Concealment Express behaves this way with products.

I’m a big guy that has trouble finding a comfortable IWB holster. Decided to try this one and man I have to say I’ve never been happier. This is my first IWB holster with the wing/claw attachment and what a difference it makes.

I tried it at about the 1:30 position and it doesn’t print at all and is so comfortable. I wore it all day for the first time and honestly forgot I was carrying at times it was so comfortable. Now I just need to practice my drawing from that position.

I have a couple other firearms I’d like to carry and will be getting more holsters from Rounded. Best choice I could have made.

Love it. It was hard finding a holster specifically for this gun but I found one that fits perfectly. Only thing I would change, is adding some padding to the back that touches the skin. The kydex is kind of annoying but other that that I have no complaints.

I am happy to recommend Urban Carry’s Lock Holster and Gun-Belt for EDC and Course Work. I tried the one recommended for the 4. 0″ barreled Glock 19 (holster #218) 2 years ago in their Black finish, but the muzzle protruded approximately 1/4″.

This time I bought their #208 (the one intended for the 4. 5″ barreled Glock 17) in their Classic Brown finish and the Glock 19 fits it perfectly with about 1/4″ of the holster extending past the muzzle, concealing it and protecting it from harm.

The overall Classic Brown/TAN finish of the holster is only fair. Their Black finish was quite good. I also bought two of their 1. 5″ Heavy-Duty Gun Belts, one in Tan/Classic Brown and the other in Black.

Again the Black finish was noticeably better than the Tan/Classic Brown. Both belts are very thick and sturdy and an excellent value. Follow their advice about what size belt to order. The actual length of the belt is about 6″ longer than the “Size.

” (A “Size 40 belt” actually measures 46″ in length. ) Their “Size” is to the 3rd hole from the end. There are 2 methods to determine the Size belt to order: #1 (Best): Measure the distance from the end of the leather of your present belt to the belt hole used.

That measurement is the Size to order. (Round up to the next size if the measurement is an odd number. ) #2: Add 4″ to the waistline of a pair of pants that fits loosely/comfortably. Reiterating: The finish on their Classic Brown (“Tan”) Holster and Belt is only Fair to Good.

It is especially poorly finished on the sides of the belt and it scuffs easily. The finish on their Black Belt (and Holster) is much better, Good to Very Good. These reasonably-priced holsters and belts are good, everyday working-gear.

I plan to add another #208 in Black for my G19. Incidentally, P80 Compact pistols fit the holsters exactly the same as the G19. Their Customer Support is excellent and their Shipping and Delivery is fast.

Recommended!.

This is a good OWB holster. I have higher quality holsters for some of my other firearms in different calibers, but this holster is the only one that I found for my Sig Sauer P228 that had almost everything I was looking for in a OWB holster.

The fit is fair. The pistol doesn’t fit real snug, but it’s not loose. It’s a good thing that it has the locking system, otherwise the pistol would fall out with a very small shake/wiggle. The locking system does keep the pistol secure in the holster.

I do like the adjustable tension. I had to really crank it down to get it tight enough to get it to lock my firearm into place and secure it in the holster. It took a little time to get it adjusted to my liking, but it can be done with a little time and patience…it fits and works good now.

I’m curious to see if the holster holds its shape and stiffness after a long period of time being used. I haven’t had the holster long enough to make a fair comment on it. I really didn’t have to break it in, the holster leather is pretty flexible.

This is why I’m wondering if it will hold it’s shape, so re-holstering the pistol will still be easy. The quality of leather, molding, stitching and finish is good. There’s higher quality holsters out there (which you’ll pay for), but there’s a lot of cheaper quality holsters charging around the same price that are a waste of money.

For the price, this is a good holster. I like the fact that this holster has a sweat guard. It’s really a nice feature and protects the firearm from body sweat. All said and done, this is a good holster for my Sig Sauer P228.

The holster is made from thick, quality leather which makes it an extremely comfortable OWB carry option. However, the belt loops can’t accommodate my Vedder Holsters EDC belt with the cobra belt buckle system, which leaves me having to use this holster with my floppier and less secure belts.

This makes the draw from the holster feel like a fumble in football. Furthermore, I was disappointed with the limited options available for light-bearing handguns. In this day and age, a large percentage of concealed-carry handgun permittees carry their weapons with a weapon-mounted light.

With this being the case, it seems like there would have been ready-made options available for brands as popular as Glock/Smith & Wesson hosting Streamlights or even Inforce lights. I don’t want to knock on the holster too bad because at the end of the day, the holster I purchase is still a high quality and viable option for OWB carry.

My main gripes are with my shopping experience and the company itself, which still hasn’t sent me an email on when I can expect light-bearing options to become available.

I received my order in record amount of time, that’s fantastic. I have 2 other Tulster holsters, both are Profiles, love them. They’re comfortable. I can slide them into my waistband in my truck. I can move them around when they get uncomfortable, and they look really good.

I purchased 2 Oaths for my HK and my Ruger. Liked the look of these holsters but I can’t get them to work. They’re uncomfortable, the guns either to low in my jeans, to where it’s awful when I’m sitting down, ( the barrel jabs into my legs) in the wrong place, so that with that metal clip I can’t, one: easily slide it into my waistband, two, slide it around to adjust it, three, the wing catches when you try to slide it into your waist so you have to undo your jeans to affix it anywhere, (neither of these guns have enough of a grip that they stick out really negating the reason to even have the wing in the first place), then you need to know exactly where you want that holster to be because between the clip and the wing- it’s not moving.

The clip makes it hard to remove the holster because like my German Shepherds, once it has a grip on something it’s not letting go, and prying it open sometimes is kinda difficult. And finally, for some reason my shirt wants to slide down in-between the gun and holster when you reholster, I know, you have to make sure that doesn’t happen, I Know.

But I’ve been carrying quite awhile now and I don’t have that problem with the Profiles. I don’t know if it’s the cut for the red dots or what but I was spooked the first time that happened. So I’m extra aware, as you should always be, where everything is when I’m wearing these.

Tulster has always treated me well, fast ship, periodic discounts, they came packaged in a bag which I liked because I get enough cardboard since COVID nowadays, they are a great company, so I don’t like sending a unhappy story.

I have taken the wings off, I made a couple of small bushings to replace the wing, I used the 2 shims on both holsters to set my retention which I really like. I like how small they are and I really like the black multicam.

I’m not done with them and I’ll continue to work with them, it just hasn’t been love at first sight for me. ( Been doing this long enough that I know what holster works for one might not work for everyone, we’re all built different) thanks for your time.

This is my second Tulster OATH IWB holster. The first was for my Springfield Amory Hellcat, and this new one is for my Shadow Systems CR920 WARPOET PISTOL. The holster’s fit and finish is superb, while the spring-steel belt clip secures the weapon well to your carry belt; however, I will say that it would be nice if there were two opposing clips (on either side) for a more secure attachment.

This second point of attachment would facilitate a more accurate / repeatable draw stroke. The negative of having one clip. the weapon’s cant changes with body movements. A much wider clip (at the top), along the belt’s top edge could possibly solve this issue if continuing with the solo-clip design.

The kydex is molded precisely for your specific weapon which helps with retention; however, it would be advantageous having an adjustable retention system that would allow for an even stronger hold in the event of a fall or (God forbid), a struggle for the weapon during an altercation.

I give the OATH IWB 4. 5 STARS! P. S. I find this particular holster to be VERY concealable (more than most) under just a t-shirt! I highly recommend the Tulster OATH IWB holster for your EDC setup. Regards, Mr.

E. Ortiz U. S. Army Veteran.

I love the OATH IWB Holster! While the metal clip took some getting used to, it is a sure hold on my belt. The option to add a different ModWing is great, but the smaller one works for me, driving the grip to my body and making my weapon virtually undetectable.

The pressure on the frame is perfect to hold the weapon in place, and reasonable for the “pull”. Optics ready was a big plus! Another item that I ordered at the same time didn’t really meet my needs.

The quality was excellent, it just wasn’t the right fit for me. I had a problem working the return over my phone (my error), and it caused confusion all around. Richard called me directly and carefully inquired about my desire to return, even offering different use case scenario and alternate solutions.

He was in no hurry, he just wanted to make sure all of my questions were answered, supporting my search for the perfect setup. He even took additional time to tell me more about himself, Tulster and its growth, the industry and his outlook for the future.

A great conversation with a great individual with a mind for excellent customer SERVICE. Thanks, Tulster! I’ll be back again. MR.

Confrorme

super

TranslateShow in original languageAvis demandé un peu tôt. Le produit est plutôt confortable et les différents éléments bien placés sur le ceinturon. À confirmer éventuellement suivant la morphologie de chaque personne.

First Kydex holster I have owned and is taking a bit of time to get used to. I always had all leather holsters for both duty and personal carry. This appeared to be the best choice for IWB carry of a Sig P320.

The carry part is great. Comfortable and barely know it is there. The issue is stiffness of the holster system getting into and out of a car or chair. I suspect most of that is my age, definitely a senior senior citizen.

If you own a Sig P320 this is a great choice for IWB carry.

Initial review is this is a very solid holster that should last for years. It is very stiff out the package and needs to be worn to create that just right fit. I will be using some leather conditioner to help the process.

The clips that hold it to the belt are spring steel and work well however the outside tips are bent up for ease of removal. I worry this may cause snagging on clothes and items but time will tell. Overall very happy with the purchase.

Great holster at a good price. Shipping was fast and it arrived without any damage or problems. Overall this is a great holster that meets all my needs. I like that it can be converted from an IWB to an OWB with just the clips changed.

Good belly band, with a little modification. I had to sew the bottom of the elastic that actually holds the handgun as it was a little too loose and i worried the gun would fall thru or out. Good band for the price though.

Thought I’d gotten a really good buy on this,turned out to be a cheap piece of junk to include allowing my weapon to fall out while walking at a church gathering. wouldn’t recommend this item to anyone!.