20 Best Bed Cover For Nissan Frontier (2022 Updated)

This is an outstanding tonneau cover for the money! I especially like the fabric, it’s a tight-knit canvas-like material that should give years of service. I treated mine with RaggTopp canvas protectant as well.

Installation was straightforward and completed within 40 minutes, which was surprising to me. Most manufacturers claim ’30 minutes’ or whatever and I invariably find it takes triple the time – NOT SO with this cover! For such a light-weight tonneau, the frame is rigid and made using square aluminum stock reinforced at the corners.

It also features a triple rubber seal between the truck bed and the frame and thus far has been water tight. I mainly wanted a cover that looked good and most importantly kept the water out of the bed and it delivers on both fronts 100%.

If a thief really wants into your bed, this isn’t going to stop them, but my truck is only out during the days for brief periods at the local Lowes; etc. – so bed security wasn’t my top concern. I’m VERY happy with this cover: NOTE – shipping was delayed as Extang was behind on production, but arrived in about six weeks from time of order.

My only real disappointment was the fact that the cover will not fold-up and secure against the cab window, but Extang recently came out with a vinyl cover that will do just that (but it’s not available in the canvas material, which I wanted).

I spent days looking for ‘the perfect cover’ and discovered to my dismay there wasn’t one – but this comes mighty close! I’m very happy with my choice, the Extang lifetime warranty and the looks/features of the tonneau.

HIGHLY RECOMMENDED!.

The Tonneau cover is great, BUT, it arrived with generic instructions which were NOT for my Honda Ridgeline- so I began following those instructions by cutting unnecessary holes in the bedliner to accomodate clamps, which would not work.

I called Extang who told me there should have been specific instructions for my vehicle in the box! There weren’t. I was extremely annoyed, to say the least! After defacing my bedliner and wasting hours they emailed the proper instructions- then installation was a breeze, and the cover works great.

A very unpleasant experience- totally unnecessary.

While I rate the Quality and Appearance as five stars, my Overall and Performance rating is four stars for the Extang Trifecta 2. 0 Tonneau Cover for the Honda Ridgeline because “it is not disclosed that the access to the trunk in the truck bed is limited to about 75% with the cover open.

” This interference is due to the location of the required mounting rails for the tonneau cover and their position in correlation to the lid on the trunk. The sides of the trunk lid come in contact with the side rails and rub to a halt.

I am applying paraffin to the rub points to reduce wear. Disclosing this information would allow your customers to consider purchasing the Extang Solid Fold 2. 0 that will give you 100% access to the truck’s trunk bed while the cover is open.

Extang does themself and their customers a dis-service by not providing information that would lead to a better and more satisfying product choice. Wish I would have known.

The cover was delivered quickly. All the components are of high quality. It is a simple system to install that sits on the truck very well and looks great. A nice product at the right price point. The installation directions could be expanded a little bit.

I had to adjust the rails a few times to have everything fit correctly. If you don’t keep the cover away from the truck cab about a half inch, it will squeak when your driving down the road!.

I was a complete novice with little to none experience with installing tonneau covers. I think the directions could be better. Thank goodness for the installation videos I found online, they were very helpful.

And now that I have been through the process once, I think installation would be quicker. Overall I am pleased with the product-it is still to be determined how the product holds up over time and weather.

It looks nice on my truck.

This does make my husband’s truck look nice. Yet no swimming pool for mosquitos to breed daily. Because truck bed is covered from rain. But my main con is it does get super hot in bed, while covered.

I wanted my husband to go grocery shopping but ice cream melted everywhere before he got home. So I do not suggest carrying anything, heat will effect for longer than 15 minutes. Now granted this has been installed few weeks only.

In North Carolina where temperatures range warm to hot now.

Installation was easy, however, the front clamps Are not designed well the plastic wing nuts thread on extremely hard! One of my front clamps became stripped from the plastic part of the bracket that was intended to keep the threaded bolt from turning.

They replaced it for free, but I had to disassemble part of the cover to replace the bracket. Also the rear latches could be made better seam pretty cheep at best. But cover looks great on truck! wish the brackets where made of better quality.

I bought the signature version, that has a matte canvas-like appearance. The clamps at the cab end were very difficult to tighten, requiring me to use 2 hands while my spouse held down the ends of the tonneau.

I called Extang & they said that the clamps should be easier to turn with time. However, we think that a lot of air still gets under the tonneau when the truck is on the highway. For the extra money spent, I’m not certain that it was a better buy than my old Tonneau Pro.

Time will.

The 2. 0 Signature Series Tonneau cover is a quality made product. Doesnt leak. Seems to fit well. Ive only had it a few weeks tho. Cant really comment on the longevity. I like the fact its not supposed to fade like similar products.

I recommend it to anyone wanting a soft tri fold cover. I do believe the price is a little higher and the company should look into other options to improve costs.

It’s a great cover, it does everything I needed it to which is keep things dry and it’s easy to use. One corner leaks a tiny bit but nothing significant. This cover was honestly kind of a pain to install but now that that’s over I’m happy with it!.

Instructions easy to follow and was very easy to install. Would of like to had a rear latch on both sides.

love these covers. have purchased 3 so far and they keep getting better. i don’t do surveys but if you’re looking for a soft roll-up tonneau that does a great job at a fair price, this is the one. you will not be disappointed.

This is my second TruXedo roll-up Tonneau Cover. The first one I had came with the truck I purchased several years ago. It had no issues and was very easy to use, and I love the look of the vehicle when the cover is down.

Fast forward 4 years and I have a new truck. I got this roll-up cover again because I had a great experience with my last one. Installed easily. Functions easily. Provides protection for the items in the truck bed especially from the elements.

As a female, I was researching all of the tonneau covers because I honestly did not know much about the structure of them, but Auto Anything’s website gave very specific information on the differences which helped me decide on the velcro tonneau cover.

I also wanted the bars to role up inside, instead of the frame to show, which the truxport roll-up does as well. Upon receiving it, I decided it looked easy enough for me to install myself without waiting for my dad to help me out.

I was concerned at first because it said if you have a truck bed liner, you may have to make adjustments, but I found that my bed liner has these circular covers that you can unscrew and pop out. After I took these out, I could insert the clamps.

The hardest part for me was closing the cover, but I liked the fact that it was hard because it let me know it was nice and secure. I also loved the free tailgate seal. Water rolls right off when it’s wet, gas mileage has improved a little as well.

Overall, I am very, very happy with my tonneau cover. I would give a 100% recommendation to anyone.

Should have bought this bad boy a long time ago! I love it so far because now I can finally use my truck bed in nasty weather when I’m out hunting, i. e. putting my gear in the back. It was a little hard to square up on my bed, but maybe because my bed isn’t square.

Nonetheless it’s a great buy!.

This cover was easy to install on my 2019 Nissan Frontier. I have a bedliner so I wasn’t certain if I should use the foam piece that was included for the bulkhead. I chatted with TruXedo and they installed responded saying it’s a personal preference.

So we installed the foam. We had to adjust the tension since it would make a loud flapping noise when driving. That was easy. As far as the weather proofing – it did get some water in the back of the truck bed after a rain.

I think this top leaks at the tail gate. There’s a little rubber flap and I’ve tried pointing it down when the tail gate is closed and then I tried leaving it on top of the tail gate. TruXedo said that was personal preference too.

So, I was a little disappointed it allowed water in. That was the main reason I purchased this top. The rest of the truck bed stayed dry. just wet at the tail gate.

Nice cover, low profile looks very good on nissan a frontier. Very little water leaks. Tip, take the time to seal the front weather strip tightly at each end. Cover can be installed with utili-track, but can only use two sets of clamps.

Works fine, but would be better with three. Requires a precise installation to adjust properly. The instructions are poor and my rails had quite a few scratches on them from factory. They are not noticable with cover installed, but for over $400 I expect better quality.

Also, make sure to turn the set screws all the way back before closing the cover the first time or else you may damage the velcro like I did.

I was looking for Tonneau cover at a reasonable price. After searching a lot, I bought this cover. The price was a bit higher than my budget. Since there is lifetime guarantee on the cover, I purchased it.

Installation is very simple. Just take 15 minutes. It’s perfectly fit on my 2016 Nissan Frontier SV 4×4 Short bed. I ordered 5-foot long cover.

Overall I’m pleased with my BakFlip MX4 truck bed cover. I have a 2018 Nissan Frontier, short bed. The cover was delivered exactly when promised, it took 6 days to come to the San Diego area. There did not have any visible damage to the box.

It was really easy to install, I did it myself with no one helping me. I never felt the need for help, it was that easy. It fit perfectly. I was surprised how well it fit right out of the box. There was no tweaking to get it right, just boom and it was done.

I’m very pleased with the final product, it really puts the finishing touches on my truck. I’ve already had several positive comments on it’s appearance. Now for the other story, I have 2 what I would call minor issues.

1. The two front corner covers were broken off when I opened the box. I assume that was from shipping. Even though the cover was packed and padded really well, those front corner covers are in a vulnerable spot.

They are just plastic and have tabs that push in the metal frame. Under normal conditions after the truck cover is installed, they are protected by the bed of the truck. I think during shipping if the package is set on it’s end, the cover could shift and break off the corners.

When I get new ones, it is a simple process to attach them. Maybe the manufacturer should look at better protecting the front corners during shipping. 2. On the right middle hinge there was a small tab that had pulled out of what looks like the hinge frame.

I don’t think it was broken, just pulled out. It made a bump in the rubber seal that runs the length of the right side. I lifted the side of the rubber seal and reinserted the tab in the slot where it belonged and the bump went down.

So far it hasn’t pulled out, so I will assume it is fixed. Again, even with those two minor problems, I am very pleased with the quality and appearance of my truck bed cover. The price is not bad for the quality of the product.

I’d buy it again if had to make that decision again.

Purchased the BAK revolver x4s. Item showed in stock and estimated shipping was 3-5 days. 30 days later, still has not shipped. Customer service dept said that I would get a notification when it shipped.

No timeframe would be specified as they didn’t know when the manufacturer would have them in stock…? I thought it was their own product? I should have read the reviews before placing my order. Items noted as “in stock” are not.

Maybe they are needing cash to place a big enough order for who ever makes the covers for them? Sad.

This is my second BAKFlip. My first was the G2 model on a Tacoma, which I was leaning towards this time but decided to go with the MX4 and I am really glad I did. Cost a little more but the seal on the top of the tailgate is much better on the MX4.

I like how you can close the tailgate with the cover closed. I would for sure go with the MX4. Installed it myself in about an hour or so.

I purchased this for a 2019 Nissan Frontier. First the grooves in the C-Clamps are deeper than the grooves in the rails so they do not tighten and stay in place, they slip off so you cannot get the rails tight enough to stay in place.

I watched a video to see if I missed something but they too made it look very easy. It still did not change a thing. I wound up improvising and got the rails on loosely then put the cover assembly in place and was able to get the rails to stay in place.

But not in the 25 minutes as the directions or video states 3+ hours and only after doing adjustments to the instructions. Adjustments need to be made to the parts at least for a Nissan Frontier. Overall I give the instructions a D, the Parts an F overall appearance a B and an overall grade of a C-.

This is the way that things should go when buying from the internet! Easy moving around your database to find what I needed. Best pricing on my item of any other site. Very quick shipping! Quality product, very easy to install.

Easily one of the best transactions that I have made. Very happy with Leonard’s!!!.

The tonneau cover was drop shipped from the maker. They sent an old stock, several years old not the new updated version. cover won’t latch shut properly fit is very poor ,left side rear sits high,poor fitting seals front and rear.

I was tricked. It will cost me over $100. 00 to ship it back.

Great product. I just got the the new Nissan pro-4x and started looking at bed covers. Found the rough country low profile, watched/read some reviews. Being made in America was another huge plus. It arrived within 4 days of ordering, and the instructions are very straight forward.

If I was able to put this together in less than 30min, anyone can. Only recommendation during set up, make sure you follow for the proper model. I wasted 10min trying to set it up, only to realize, I was following the Titan instructions, so totally on me.

Love it! Fits perfectly, and I can now throw all my gear in the bed and not worry about it over night.

I ordered this just from the product information. It came in a was so simple to install and fit perfectly. I love it and makes my new 2020 Nissan Frontier Pro 4X look great. But what really impressed me was Rough Country’s service.

When my cover arrived it had a hole in the box and upon inspection whatever made the hole had impacted the cover so hard it almost punched a hole threw it. Rough Country immediately offered to ship a new one out right away if I so wanted.

And I was leaning that way but the damage was on the underside of the cover with just a small bulge on the top. The gentleman told me that he was sure if I kept it they would reduce the price. I thought about and decided to keep it.

The very next day they contacted me and gave me a substantial discount which was almost immediately credited to my account. I can’t say enough of just how impressed I am with my new cover and Rough Country’s Customer Service.

This is the second cover I have had for my trucks. The cover fits great on my new 2022 Pro 4X Nissan Frontier. The only problem I had was that the rails were too long by 6 1/2 inches. I could not close the tailgate.

I figured it out and used a saws-all to cut them down to fit the truck then filed down the rough edges. No real issue I was able to put the plastic end caps over where I cut them and they are as good as new.

I would recommend this cover to anyone that is looking for a cover for the 2022 Nissan Pro 4X Frontier.

The reason I give this product one star has nothing to do with the quality of material or installation. It is purely do to it’s design. Tonneau covers are suppose to fit ON TOP of the bed so water runs off the side of the truck, like the one thats currently on my truck.

This product attaches to the INSIDE of the bed via adhesive strip and clamps. Water drains to the seam where it attaches to the bed. The roof should always overhang the walls to keep water out.

Recently purchased a Nissan Frontier,I had trucks previously with snap tonneaus which don’t work well during the winter months here in upstate NY. Saw a truck with a tri fold and checked them out on line at Auto Anything.

Picked the Lund over other brands for the warranty & couldn’t be happier. Took 5 mins. to install and I have since removed it to haul firewood, it’s a breeze to take on and off. Have had several people at work ask me about it and I highly recommend it, great product and looks great on the truck.

Installed in about 5 minutes, looks and fits great, arrived quickly and damage free! I can take it off quickly also and fold it up to nothing for storage! Great price and product!!

I’m happy with this cover it looks good and the price is right.

Purchased this kit for my 01 Silverado stepside, instructions were basic, but adequate. You can tell that the stepside model was kind of an after thought because the mounts actually SCREW to the inside of the bed/box instead of clamping.

The holes in the aluminum hardware weren’t deburred when they arrived, but that was easily fixed. That’s really my only complaint with this. The cover is very taunt and moves very little when latched in place.

Since it opens from the inside, I added a locking handle to get a relatively safe area to stow things; it’s almost like having a big trunk. The cover keeps most all water out and looks great. I picked this over others for its low profile- the pictures speak for themselves.

Mine stands about 1/4 inch above the bed. I’m happy with it!.

I had to replace the cover that I’ve had for 15 years. I purchased a cover made by the same manufacturer for the same truck. Things didn’t quite measure up and I had to make some modifications. That said I would buy it again because it came quickly and looks great.

I had the cover installed in about 20 minutes – provided directions were sufficient. The low profile looks slick, but the mounting rails shorten the bed width slightly. However, I really like the ability to access pretty much the entire bed and then quickly protect what I’m hauling from the elements.

Material seems strong, and so far the cover is keeping the bed dry. The cover was more expensive on other sites, and it arrived at my doorstep only two days after I ordered it.

Cover is nice, easy to install. to unwrap the cover from the protection took the longest time, and was really appreciative. color matched, fit perfect, and looks excellent. Numerous people ask about it, and are impressed about the quality.

So am I. Will purchase again from Auto Anything. Overall the whole process was outstanding! Thanks.

Nice smooth look which adds to the styling of my 2011 Dodge Ram. Very nice paint job. Shipped in a very secure packaging and delivered right on time. Fairly easy to install. Best to have 3 people. Operation of the cover very smooth.

Rained like crazy after installed, and no leaks inside truck bed. Would recommend to others.

Excellent product. Delivery took about 3 weeks and the cover was packaged extremely well. Installation only took about 30 minutes, but it does require 2 people to be able to lift the top onto the truck.

Excellent fit and finish which matches the factory paint very well. Would recomment to anyone looking for a hard shell cover.

The directions were a bit lacking with the ambiguous pictures where it was difficult to tell one end from another and where the dimensions were important. Once I figured out the ends (about 10 minutes), the cover installed easily although I would caution to pay careful attention to the overlap on the tailgate.

If not installed properly, at highway speeds, the end can pop-up resulting in a quick pullover to re-latch. Once I slightly modified, the cover is flawless. Overall, very happy.

Bought this for my father for Christmas and installed it for him on Christmas Eve. It took all of 15 minutes with a single ratchet and socket. Excellent fit, finish, and most importantly, function. I would highly recommend to anyone who wants a great look and fit for a great price.

He loves the fact he can roll it up by himself while standing on just one side of the truck (he’s older).

The installation instructions could be written a little better, like from the standpoint of a do it yourselfer/rookie vice a technician. I figured it out, being a backyard mechanic, yes, but a redo of the instructions is recommended.

With that, once installed the cover performed flawlessly. For I used it to cover my family’s household goods while we drove from Chesapeake, Virginia to Phoenix, Arizona in just over 4 days, through traffic dirt, dust devils, rain, hard rain, etc.

, it did not leak, blow off, or allow any damage from the elements to occur on our stuff! So, therefore; I fully recommend this cover to any and all needing one. R/ Jack, now a Phoenix, AZ, resident.

went on easy with help from my brother. Had a problem later that week. got in mid 90’s and it shifted. couldn’t get tailgate open. finally drove down a bumpy road and then got tailgate open. had to shift cover forward a little.

now its been fine since.

AWESOME!!! It was so easy to install. It works with my sliding bed extender on my Nissan Frontier 2013 SL. It does hang and blocks the bed extender a bit on the left side middle clamp, so I may switch around the clamps or shave off one of them just a TAD bit somehow.

But for now, I can easily untighten the screw a bit on the one side that hangs up the bed slider (utilitrac). The other middle side slides fine, so I think I can find a solution. But with this good-looking, easy to install cover, I still give it 4.

99 stars. I can’t say how much water does or doesn’t leak (yet) since it hasn’t rained. But it was worth every penny! I would redo the ugly logo printed on it. All auto logos these days look class A.

So hire a professional designer to get a better looking logo if you are going to have it be a permanent part of our vehicles. 4. 5 for appearance, just until the cursive is gone off the logo!.

I installed the cover myself. I’m 65 yrs old and slightly handy capped. If two people work together it could be installed in 30 to 40 minutes. Looks great! I installed another brand six months ago and this one is heavier.

I like the looks of this one on my black Nissan Frontier.

The price for the cover was fair, especially when I saw the surprised look on my Toyota dealer’s face during a separate visit. He offered to install it for the cost of 1 hour labor ($75). After having the box sit in my garage for 2 weeks and not having time to install it, I took him up on the offer.

I enjoyed coffee and cookies for 2 hours while they installed it. So glad I hired a professional rather than take 2 hours or longer to install by myself.

it was very imortant to read the directions all the way through before starting. i installed it by myself. it would have been easier if i had a spring clamp or someone to hold rail in place while i tighened the clamp bolts down.

i took my time & still installed it in about an hour. if i did it again i could do it in 30 min. i’ve seen alot of tonneau covers. this is by far the best i’ve seen. i’ve had lots of complements. feels good to tell them i did it myself.

I just got my Access Lorado tonneau cover onto my ’05 Ford Ranger a couple of days ago and I LOVE IT! My husband broke his ankle a week ago and is in a cast, so he stood by, read me the instructions and lent an occasional hand and we had it on in about an hour.

I know I could have done it alone if I had needed to. The quality is great, it fits perfectly, it’s really easy to roll up and back out again, and it looks terrific. I read a lot of reviews before deciding on the Laredo and I am so glad that I did.

I had a hard shell tonneau on a previous truck and found it to be a real hassle if I wanted to move something higher than 18″, and it leaked. The Laredo is a very nice design. It arrived quickly and in perfect shape and I am very happy with my purchase and my experience with AutoAnything.

Thank you.

Shipping was super fast. Fit was great and looks fantastic. The only issue was the wrong hardware was sent. Hardware was way too big for the nissan track system. I believe it was hardware for the chevy silverado.

I called and they wanted a picture of what was sent but the installer had already cut what came to make it fit. I would have liked the correct hardware but after it was finally installed it seems to work well.

Because of the hardware issues it took about 3 hours to install. Without hardware issues would have been definite 5 star.

My biggest worry with ’22 frontier body change was proper fitment (keeping water out during a rainy drive and while stationary). I’m happy to report after a stormy drive and while parked, the inside of my bed was happily dry.

I’m happy they even included some foam to help with fitment near the rear windshield (not touching, but again keeps the water out). My only real complaint (kind of) is the rubber strips near the rear windshield attached to the cover basically do not apply with the ’22 bed.

The included extra foam gets the job done.

Installation was simple and required less than thirty minutes. All parts were present and seemed adequate for their intended purposes. I used the supplied self-adhesive tape (intended for Tacomas) at the bed’s bulkhead for a better seal.

It has been through two rain storms since it was installed, and only a few drops of water made it through at the bulkhead. For an economical bed cover it exceeds my expectations.

The instructions were a little confusing. When it came to installing the actual cover, the insturctions didn’t mention anything about making sure the cover roll-up straps were on top before the cover bar was aligned and secured.

After completely installing it, had to uninstall the cover and banr to remove the straps from inside the bed. Because I’ve never seen one of these covers up close before, I had no idea what to expect.

However, overall, it is a very nice cover. It’s already made a significant difference on my gas mileage. I went camping and needed it before I left. It arrive just in time for me to install it. I don’t know what I would’ve done without it.

It’s exteremly easy to operate.

I’ve bought these in the past for other vehicles, and never been disappointed. Only takes an hour or 2 to install, and always look great.

Very good tonneau cover I like the way it looks and locks into place