20 Best Baby Bottle Warmer And Sterilizer (2023 Updated)

Keeps water hot for more than 6 hours and was great for travel use but also for at home use for bottle warming during a night time feed as well. The button lock is a bit confusing at times because you tend to think that pushing in locks but it’s the opposite.

Don’t overfill or else the water will spill out when you tighten the lid on. Otherwise, the body of the thermos is always cool to touch. Plastic cover is wide enough to hold wide bottles such as the Como Tomo as well.

Just a bit heavy when carrying around for travel but that’s mostly because of the water.

This is perfect for when you are out and about. I initially used it to warm expressed breast milk using the hot water from the flask in the white plastic tub. My baby is now on formula and I use the hot water in the flask to make up the bottles and cool them down with cold water in the white plastic tub.

The flask keeps the water hot for hours. I’m about to start weaning so will be able to use this to warm his food when we are out. Multi functional and a great buy. I would definitely recommend.

I received this as a baby shower gift. Although I’m not a huge fan of the bottles from Tommee Tipper I do LOVE this travel bottle warmer. In the beginning of my breastfeeding journey I ALWAYS had this in our bag.

I started by running really hot water in the thermos, then I would add boiling water inside. This would stay hot for more than 24 hours sometimes. It’s definitely a great product an on the go parent who’s baby likes warm bottles.

The device does what it says it does. It keeps water warm which is convenient. There are 3 temperatures, room temp, body temp, and a little warmer than body temperature. The different colored lights let you know when the water is warmed or warming and at what level temperature the water is.

The resevoir on top is definitely top heavy and it takes quite a bit of water to keep filled to the minimum line so you waste your distilled water when you want to clean it. Cleaning it is slightly tough because the resevoir is attached to the electrical part so you have to be care not to get it completely wet.

The worst part of this device is that it leaks from the tap and leaves a mess on your countertop. I will be continuing to use this only until I find something better.

I read the reviews before purchasing and was skeptical but hopeful. I despise bottle warmers and making bottles in general so anything to make that easier, I’m up for trying. However, I’m so sad to say we threw this BabyBrezza water dispenser away today after only FOUR months of using it.

It only works when it wants to. We had to descale it multiple times and we used filtered water in it. We’ve unplugged it and plugged it back in multiple times. This is the perfect example of something that is ‘too good to be true’.

I wanted to love it and for it to be the answer to bottle making, but it’s not. Save your money. Don’t buy this.

There were some feedback stating that they were having an issue or the handle breaking and I can see that being a potential issue. In my experience you have a desire to press harder against the handle as there isn’t a whole lot of resistance so you think ok if I press a little harder the water flow will increase but it will not.

The water flow is the same no matter how hard you push down the handle. That being said, For my family this was a game changer for our formula fed baby! It takes zero time to whip up a bottle for a waiting little one.

A couple of my favorite features are the three temperature options which have been very consistent with holding true to set temperature and along with the volume the water reservoir holds I don’t think this warmer can be beat!.

This was so nice for on the road. The water stays really hot for a good amount of time. I would try to have my milk somewhat thawed before going somewhere as the frozen brick didn’t always defrost before the water got cold.

But that was to be expected.

The insulated stainless steel bottle does not keep the water heated for more than a couple of hours, not the entire day as advertised. I have tested this out many times and have been disappointed that the water does not stay heated longer.

I would have given this one star if it wasn’t for the two warming cups. It is the perfect size for the Kiinde bags and bottles to thaw the frozen breast milk. It does fit in most cup holders when you have to warm your milk on the go.

With my daughter she was very picky with having her milk warm no matter what along with her baby food. This was a heat product to have for extended car rides as well as traveling to see grandparents.

The product is small so it was not overly bulky and fit right in our diaper bag. We traveled from VA to SC and the water stayed warm and we were able to do two bottle feedings in the car without stopping.

Ours was a gift so sadly I do not know where it was purchased but it was an excellent investment.

I am writing this review today to thank Mr brown customer service team and manager Shelley specially. She and her team is so wonderful that it is beyond words to express. They help me with the replacement with some other unit and upgraded my replacement with this new Sterilizer system.

I am so impressed with this new machine. it has so many different features. It comes with an extra filter, sterilize and dryer. Drying feature is fabulous if you in hurry. Easy to handle and work with.

The steel plate is so fabulous it doesn’t collect any residue, burns, mineral collection etc on it. Just simply wiping after the use, keeps it clean. I think this is the best invention for babies bottle Sterilizer, so far in the market.

I am so happy and pleased that I have been recommending this machine to all my friends and family. As much as I can talk great about this machine. I definetely need to thank my beautiful new friend Shelley and her team because of whom I got to be introduced with this gadget.

Thank you Shelley for helping me with an exchange and giving me more expensive and upgraded machine. Words are not enough to say thanks to you Shelley and Dr browns team. But I am really thankful to Dr brown to have gem employees like Shelley in their team.

So, we had another Dr browns bottle sterilizer. That one took up a lot of space, mostly because the lid was hinged and huge and it needed to be scooted away from the wall in order to open all the way.

I also didn’t like the way it turned on, I found it kind of annoying to have to push a button, just to wait and push another button to get it going. It just randomly stopped working after 6 months, (we always used distilled water and cleaned per recommended maintenance) so we bought this one to replace.

(Yes we are still sterilizing bottles, and I plan to for the entire first year). This sterilizer!! We’ve had it two days, so I don’t have much experience so far. But SO FAR, it’s amazing! What I love about it is: it takes up less space on the counter.

Instead of a hinged lid, it has a removable lid and shelf. All parts are removable and dishwasher safe! Even the large gray bucket at the bottom that holds bottles. I love that there is no waiting for the unit to “be ready” to turn on the sterilize cycle.

You can just push two buttons and it’s going. The drying feature works really well and is just a huge bonus! Our bottles would never completely dry with the old sterilizer, and I would have to tap out excess water constantly when preparing bottles.

Target at the time had the best deal on this, and i received 10% off as well. I am so happy with this, and really hope it holds up for another 6 months.

Received this item as a gift and it’s honestly been one of our favorite/most essential baby products. I EP/bottle feed so this sterilizer gets a lot of use. The sterilizing cycle is only 5 minutes (not 30, like another reviewer has said) and drying cycles can be 30,45 or 60 minutes.

We do the 45 minute drying time and all our bottles come out perfectly dry. Yes, you need to wipe clean the heating plate in it every time. While it’s probably not recommended, about once a week I take steel wool to it and it cleans the rust of really well.

I personally rather do this than boil a pot of water (or do the microwave method) several times a day. Also, other reviewers have complained about water getting on the cabinets. Since this device produces steam and the steam does escape the unit, you’re going to deal with condensation.

It has to go somewhere. If you don’t want it on your counter I suggest getting some sort of drip pan to set the device on. Also, do no put it directly under a cabinet! It could warp the material and/or take off paint.

When used correctly and proper precautions are taken, this is an invaluable device for a parent of a young baby who uses bottles. Highly recommend.

I am very dissatisfied with my sterilizer and dryer. Trying to get a hold of anyone with baby brezza is a nightmare. The actual product itself is not bad but I’ve only had it for not even 2 months and the sterilizer stopped working.

The last time I tried to use the sterilizer it leaked water all over my counter and cabinets I was beyond frustrated because I followed the exact directions. There is a certain amount of water you must fill with or else it will not work or it will leak everywhere.

I measure the water to the exact amount and it still continues to leak no matter what. Their customer service is HORRIBLE I tried to file a warranty claim and trying to get a hold of someone is a joke.

Their products are not cheap but you would think it’s cheap because how terrible the quality is , I will never purchase items from them again until they fix their customer service and products. I understand things happen to products I really do but when there is no one to communicate with is frustrating.

within the last month I purchased one of the sterilizer dryer units before they had announced the 10 minute fast dryer sterilizer. The older unit takes 30 minutes to sterilize and typically another 30 minutes to dry.

It works very well but it is inconvenient requiring multiple funnels to be purchased as well as extra bottles that I don’t absolutely need. I feel like I am constantly having to stay on top of where we are out in the sterilizing process so that we do not run out of bottles.

I really think that those of us who just purchased a older sterilizer dryer before you are now receive a trade-in value or full return. It’s frustrating to see that there are reviews in which people are stating that they have had the faster dryer unit for five months when I purchased my unit a little over a month ago and it was not on the website at that time.

Great purchase. I was skeptical about spending money on bottle warmer. My babe is 100% bottle fed with formula. We were using a hot mug of water to warm bottles which could sometimes take forever with reheating the water over and over to get it just right.

Literally I can make a 5oz bottle and have is perfectly 98F- 103F in 3 minutes. It is super helpful overnight with bottles. Cut down 10 mins of my previous warning method (which all moms and dads know 10 extra of sleep does make a difference).

I say it is worth the money spent for us. But we do warm every bottle, so if you are on the fence consider how much you might be using it anyway. One thing to note. Do not pour warm water into the basin.

The bottle will get too hot. First attempt temp reading was 118F. I now only using cool tap water in the basin for warming. One design features lacking is an internal temp sensor to switch off when water gets too hot… Philips should upgrade the design features for more safety with temp sensing.

I’m an aspiring minimalist, I thought a bottle warmer would be an “extra” purchase that I didn’t need. Didn’t even buy one until baby was almost 3 weeks old. After breastfeeding didn’t go as planned and having to use both formula and pumped breast milk to feed baby, we used “mug of hot water” to warm bottles – which took forever, was annoying, and felt really wasteful.

Then we got this puppy; now I can’t imagine being without it! It’s easy to use, quick to set up, and does its job perfectly. I use the glass Avent bottles (so far just the 4 ounce small ones, but I imagine the bigger ones are the same) and the glass does get kinda hot sometimes but the milk is an appropriate temperature inside.

For those who have read the negative reviews I disagree with all of them. 1. It does work with different materials: plastic, glass, and silicone bottles – the manual says it’s comparable with all these, just to add more time for silicone.

2. There is an indicator for when it’s ready, it’s just pretty low key (a light instead of sound). The ring around the power button acts like a timer starting out with a quarter blinking and when the ring is full and no longer blinking, it’s done.

3. It is much more efficient than “mug of hot water”! I always hated having to refill the mug every two seconds after it cooled down and this heats up on its own and then cools down when you turn it off.

This makes my life easier with a newborn who won’t breastfeed and if you think it would be worth it for you, then I highly recommend!.

This is probably the worst bottle warmer I have ever used. There’s an eight year age difference between my last baby and my middle child, and a five year age difference between my middle child and my oldest.

They will no longer me the bottle warmers that I had with either one of my older kids so since I was getting Avent bottles I figured I would get their bottle warmer as well. I wish I save the box because this thing sucks.

On a rare occasion it will actually warm the bottle but it takes forever. Even when you turn the dial up all the way when the button stops blinking a 5 ounce bottle is still ice cold. Do not waste your money.

IšverstiShow in original languageThis is a great warmer for the price. Compared to other warmers priced at $50-$60 dollars, this was a no-brainer. The warmer can heat up bottles from the fridge, can sterilize pacifiers, and can heat up very well.

it requires 40 ml of freshwater for every use. This warmer does not have an option to warm up only a single ounce, rather it starts off at 2 ounces. Something to be aware of when making a smaller bottle for a newborn.

The sterilize function works impressively well. It is our go-to device to sterilize our baby’s pacifiers. All in all, a great bottle warmer/sterilizer for the price.

IšverstiShow in original languageI received this product in return for my honest opinion. Overall for the price, this bottle warm is good. I use the Dr. Browns bottles and they do not fit in this bottle warmer unless you take the top off of them.

I wish you didn’t need to dump and fill up the water for each use. This would not be a good bottle warmer for a family of multiples, as you have to wait 20 minutes until you can warm up another bottle.

I make bottles the night before and keep them in the fridge, so I just use this warmer to bring them back up to room temperature. You can play around with the settings, but there is no way to choose the temperature you’d like.

For the price though, it gets the job done.

IšverstiShow in original languageI received the Parent’s Choice Electric Baby Bottle warmer as a sample in exchange for an honest review. As a new Nana who is able to babysit her infant grandchild, this bottle warmer was exactly what is needed! Make sure to follow directions and ensure the milk is at room temperature before placing in the bottle warmer.

This product warmed the bottle to the perfect temperature in about 2 minutes. I remember the days of always reheating the bottles and making them too hot. Sure wish this wonderful device was available when my babies were little.

This is a well made product and works as promised.

My husband and I finally decided to toss it today- after about 7. 5 months of use. The machine has more cons than pros unfortunately. Let’s start with the reservoir for the distilled water, it has an opening that’s about the size of a large pill, which makes it challenging to fill.

Then comes attaching it to the actual machine, the way that worked for us was to quickly aim the opening to the bottom and click it in before it leaks all over the counter. The first few times our counter was soaked.

Now when you want to sterilize or warm up a bottle there’s a couple of basket like part’s inside that are questionable for their use. The actual basket that supposed whole the bottle and what you’re apparently supposed use to lift the bottle out once the cycle is done is also not convenient once the cycle ends- you’re really more likely get a steam burn on your fingers and possibly spill the liquid if you really can’t wait to let the bottle cool off another minute.

In the instructions it does say the last minute is for letting the contents cool off- unless you’re out of water, it’s not cooled off. Oh, and don’t forget to put the steam lid on the bottle, otherwise distilled steamed water will drip into the bottle- not the end of the world, but no one really wants that.

Onto the functions, which is probably the best part of the machine! It has icons for sterilization, and the different temperatures of the liquid (frozen, fridge, room temp) there’s also settings for the type of bottle (glass or plastic) and the amount of liquid in said bottle (2-8 Oz).

Literally the easiest part, press a couple buttons a few times, find your setting, press start, it shows you the timer and beeps 4 times when it’s finished. Now onto the WORST part of the machine, the cleaning! In the instructions it gives you 3 options, daily clean, deep clean, and fast deep clean.

Both of the deep cleans use vinegar, and when the instructions say “clean in a well ventilated area” they mean it! We deep cleaned it once with vinegar and put it in a fairly outside room- the machine and the room smelled like vinegar for about a week.

Wiping down the parts isn’t too bad, just a solid hand scrub does the trick, but then when you try to clean the bottom of the machine, good luck! There’s a metal (I think?) heater covered by a vent looking thing- that is close to impossible to hand clean- the vinegar didn’t do much to help either.

All this being said, it worked for us for a while, but I’m happy to be rid of it.

These Dr. Brown’s bottles are the best bottles I have ever used. I had an issue with one out of 5 I bought and they were very quick to assist me in fixing the issue. The nipple from the Options wide neck bottle we got has a split in it so it kept leaking formula everywhere.

We were all confused how it was happening until I went to clean the nipple a second time and felt my finger literally go through it. I usually use a bottle brush so I didn’t notice the first time. It was a pretty big split too but when he wasn’t using the nipple it looked fine.

They sent us a brand new nipple quickly and his new bottle is now perfect. We used a different brand bottle with him and could immediately tell a huge difference in the amount of gas he produced. His burps were bigger and he fussed a lot more because all that gas made him very uncomfortable.

We went back to Dr. Brown’s bottles and instantly could see the difference. He still has to be burped but they are way less violent and painful for him. It’s just expected for a baby to get gassy but why make them get it worse than they need to? I recommend these bottles to every mother I know!! I want to make sure to spread the word about anything that helps make babies more comfortable and happy and for feeding this bottle is the best.

I will never use another brand again. No I do not work for Dr. Brown’s and this was not a sponsored review. I just really feel this is the best bottle for a healthier happier baby.

Dr. Brown’s gave me this product for free in exchange for an honest review. That being said, I have never used a bottle warmer before, and this is my 3rd child. Pros: -The milk can get very warm. I usually warm my bottles at the sink, so they’re always lukewarm, but this makes them very warm.

-Can warm milk from frozen, in a bag, saving a lot of time and helping when in a pinch. -Customization: I love the different settings that adjust for bottle size and fresh vs frozen milk -Appearance: It looks really nice on the counter.

Cons: -Having to remove the Dr. Brown vent to warm the bottle. I store milk in the drinking bottles, so this requires me to disassemble the bottle in the middle of the night just to warm it. This means I have to set the baby down to remove the vent before warming, which increases his screaming time.

I also have to set the vent on a paper towel to prevent getting milk all over the counter. If I didn’t store my milk in Dr. Brown bottles, this wouldn’t be an issue. Since I do, it just makes warming inconvenient and adds an extra step and extra time when I’m already tired at night and baby is crying.

-Counterspace: Since I’m used to warm water, this removed some of my usual counterspace. However, if you were used to a bottle warmer, then this would be no different. -Replacing the water daily: You need to replace the water in the machine daily, and it recommends distilled water.

To me, that’s an extra cost/inconvenience. However, I have never used a bottle warmer before, so maybe this is standard procedure, I don’t know. Both a Pro and Con: -Timing: I feel that this still takes a long time for me.

I’m used to using a cup of warm water to warm the bottle. This definitely cuts down the time by about 30% for me, since I only use lukewarm milk. Even 30% less time is significant when your baby is screaming in hunger.

It is probably a big time saver if you usually make your milk very warm. However, since I don’t make mine as warm, it didn’t save enough time for me to warrant taking up my limited counter space. Overall, I feel like it has amazing customization settings and makes the milk really warm.

If I ever need to use frozen milk, I would definitely use this. It does save some time, which is nice. The biggest drawbacks to me are having to remove the vent from the bottles before warming and having to purchase distilled water for the machine.

These 2 reasons mean I won’t use this on a regular basis. If these two settings were changed, II would probably iusethis regularly since it does make the milk nice and warm with 30% less time (which is significant when baby is crying loudly at night).

For now, however, I have limited counterspace. I also hate having to put baby down while crying, as it takes 2 hands to remove the vent from the bottle before warming. I will probably just pull this out when I need to warm frozen bags of milk.

We almost spent $50 on another warmer. I’m so so glad we didn’t. I love love love this bottle warmer!! Where we are at we can only find the ready to feed formula which has the be refrigerated after opening and anyone with a hungry baby can understand the urgency of heating up a bottle.

This warmer comes with a handy measuring vial for achieving the perfect temperature. You might have to play around with the amount of water to get your bottle where you like it but by the time I get baby changed and ready to eat the bottle is done! Then all you have to do is mix it to eliminate the hot spots.

Then just wipe it out after it cools. Super super easy.

i didnt even want to give 1 star. this thing only warms the actual bottle. not the formula and takes forever to warm also. i wish i returned this and soon as i realized it wasn’t any good. waste of money.

If you want something that actually warm the formula and you dont have to use a microwave. Then buy a water dispenser and fill the water jug with baby water. it has a hot water dispenser on it. use some hot water to mix powder formula and fill the rest of the way with cold water.

then you will have a warm bottle for baby to drink and always make sure you test the formula before giving it to the baby.

At the end of the day the warmer works. I add the right amount of water and sometimes it’s still cold sometimes it’s too hot. It also isn’t really good when it comes to refrigerated bottles. You have to run it twice for the bottle to actually get warm which is irritating.

The water container doesn’t pop back into place easily so that’s also annoying but for the price it’s an ok bottle warmer.

I got this bottle warmer thinking it was going to be great but I was a little disappointed. First I want to start off by saying that this warmer only lasted me a month. One day out of no where it just wouldn’t shut off.

I figured ok I’ll just have to unplug it when I want to shut it off. I no longer can use the timer and just have to manually do it myself. It was a little annoying but I would have dealt with it. Then one night I went to warm up the bottle and it started to smell like something was burning, actually smelled like burnt rubber.

Next thing you know, there was smoke coming out and it was starting to burn my counter top. Thank god i was standing right there and shut it off immediately. The other problem is the way it heats the bottles.

I have 2 different types of bottles, ola baby which is silicone and Dr brown bottles which are plastic. When I heat up the silicone bottles, it gets extremely hot on the outside but the inside doesn’t really warm up.

I even added an extra minute and it still didn’t work well. When I use the plastic dr brown bottles it does warm the milk up a little better but the bottles get scorching hot on the outside! I usually grab a rag to pick it up and then put it under cold water for a minute or two because the nipples get too hot and you can’t feed your child with a scorching hot nipple.

I am disappointed with this bottle warmer. Oh I’d also like to mention that because it’s a steamer, once you remove the top, it leaks water everywhere. You will constantly have to wipe down your counter, I just started putting it in the sink right after I’d remove it to avoid that problem.

I bought this product a couple of weeks ago and I have to say that it is indeed a real time saver, I’m using it more at night time to warm up the milk bottle for my newborn, using our Avent bottles, but still I have to use the thermometer to check if the water /milk has the right temp.

Would be very helpful for us parents if your bottle warmer had a little display outside to show the temp. sometimes I have to rush, because my baby is so hungry and can’t wait. Otherwise I love it, cause you can use any bottle you have to warm up and also would be very helpful for later to warm up faster the first baby food.

i as very impressed with Jool baby bottle warmer. It comes with easy to use instructions, and digital display. I love that it has a keep warm mode. It comes in handy for quick fuss free feedings. the fact that it heats up formula, breast milk, and juice is great.

The auto shut off feature ensures that it is safe, and so east to use. This product is a great addition to any home with a baby. I would recommend this product to all my friends and family.

HIGHLY recommend this bottle warmer/cooler! We got it when my son was around 6 months and I wish we had it sooner! It’s a must for any parent with a baby that feeds overnight. We made 3 bottles for the night, first one would get fed to him right before bed then the other 2 would go in the cooler so I didn’t have to get out of bed! Be careful with the warmer though, you don’t need that much time for a smaller bottle! Over time though it gets less powerful and you can increase time.

It died after using it religiously multiple times a night/day for 6 months, but if we had needed it for longer we hands down would have purchased another!.

I have 4 kids, my youngest is just 3 weeks old. I never used a bottle warmer with any of my 3 older kids. I decided to try it out this time and I wish I would have done it sooner! I love this warmer! It really has been a life saver! It works perfectly and is so convenient.

When my little one starts stirring in the night, I just pop the bottle in the warmer and by the time I’ve changed his diaper and am ready to feed him, his bottle is warm and ready! All can be done one handed as well, which is a big plus when baby is fussy.

As long as you add the right amount of water for your bottle size (liquid in the bottle-not actual bottle size) the milk comes out perfectly warmed and not too hot. Just be sure to follow the instructions.

I love the cooler feature as well. It is extremely convenient for us since we live an hour away from town, so we have frequent shopping trips that easily last several hours and having the bottles ready in the cooler is very helpful.

I would definitely recommend!.

I didn’t register for this item but got it as a baby shower gift and it has been THE BEST gift so far! I planned on breastfeeding but when my milk didn’t come in for almost a week after delivery I had to give my little one formula.

I whipped out this warmer and it’s larger size holder fit our bottles perfectly and there’s a handle you can use to lift the bottle out so you don’t burn yourself which is nice. It’s easy to use, has a chime/bell to alert you when the timer is done, comes with a travel cooler which works great for when I pump at work and I can transport my milk back home.

Great product that I would recommend for all moms regardless of how you feed – I breastfeed but now that my little one is in daycare he gets frozen breastmilk and this works great to warm it up for him!.

This bottle warmer was a lifesaver. We used the constant warming setting to keep a bottle warm for night feedings. We were able to feed our baby right away, without the long wait or making him cry. Night feedings went so smoothly that he started sleeping through the night.

We’re currently using all the other settings such as sterilizer and regular bottle warming – so helpful. Tx!.

Good quality. I like the double bottle design and Temperature control system. Good to use for different needs.

Been using this for a while and I’m totally satisfied with the product. It is as described and it’s looking beautiful.

I just had my first child, so I’m new to “handy” gadgets like this. But I have to put more water in the warmer than instructed. The bottle doesn’t heat evenly, so I have to take the bottle out in the middle of it warming and shake it.

which sometimes burns my hands. Also, the warming plate rusts very fast, turning the water a brown color, staining the bottom of my plastic bottles (Dr. Browns) And the inserts that come with it. I keep trying to scrub it, but it’s quite difficult to clean.

Lastly, I tend to only have one hand available when prepping a bottle, and the knob is very tough to turn back and forth to turn the warmer on. The only reason I still use it is because it was a gift, and I don’t feel like spending money on another one.

But for the next child, I’ll switch to a better brand.

I purchased this unit because it seemed to have all the parts I needed to replace my old ones. I have this identical unit, purchased new in 1984. Unfortunately the parts that arrived are not exactly in the condition they were advertised.

The base, with the motor, has cracks at the top (that was not mentioned). The work bowl and other plastic parts are full of cracks, and one of the pieces has a chunk missing from the top edge. Once assembled, the unit will not operate unless you apply significant downward pressure on the work bowl and plunger.

I should have kept my money and put it towards a new food processor.

I wanted to save money so I went with this Cuisinart model. It has been very disappointing and I wish I spent more money to get a better warmer. I use this to heat 4oz bottles for my newborn, and every time the bottles come our burning hot around the plastic ring that connects the nipple to the bottle.

It will actually burn your hands if you pick it up at the top of the bottle. It cools down quickly, but it’s still a major problem, especially at 3am when you’re half asleep. Also, this thing doesn’t even seem to warm the formula very much.

When I test the formula’s temperature on my wrist, it’s still cold. This was a complete waste of my money and I wish I’d just spent the money to get a better quality bottle warmer.

This is for the Japanese blades for the DLC-870 set. They are heavier and tend to keep an edge longer than the Chinese blades. I have a set that is over 25 yrs old and still going strong. Hand wash only and dry immediately.

The original set includes 3 julienne blades (2X2, 3×3, 6×6), 4 slicers (1mm, 2mm, 3mm, and 6 mm) and the fine SHREDDER. Only three blades not included are the 4 mm slicer, medium shredder and the fine GRATER.

Using this for my second child and still works well, has held up and is a no fuss system. I do wish that the side that fits in the cup holder was the larger cup, this way can safely fit more hot water and a larger baby bottle if needed.

We had 3 bottle warmers and never used a single one of them. I guess we were lucky that our baby would drink her milk hot or cold. If I have another child I’ll be interested to see how this product works.

It doesn’t seem that based on what I’ve read, it’s going to be a favorite. I will update once I give it a try.