The SmallRig Articulating Arm with Dual Ball Heads (1/4”-20 screw) can be used to mount an accessory on your camera rig firmly and flexibly. Both ends of the arm feature a 1/4″-20 screw and a tightening thumbwheel for easy accessory mounting, with rubber pads protecting the equipment from scuffing.
Use the included small hex key to further tighten the thumbwheel if the heavy device is attached. Both ball heads are secured using the single, large thumb lever. Compatible with a wide range of devices such as field monitor, LED light, sound gear, etc.
, this arm has a load capacity of up to 5 kg/11 lb. It is interchangeable with other SmallRig ball head parts for different mounting configurations.
Love it. It’s one of the pricier options, but the ability to really tighten the ends with an allen key is awesome. I use this to mount a monitor, and with another ball bearing adapter I used before there was always a good amount of movement when you used the camera handheld – you can hand tighten only so much.
And once you tighten the lever the ball bearings lock in rock solid – there is zero movement or wiggle – and despite being somewhat short you have a lot of flexibility in how you’d like to spin/move this to fit your needs in regards to different mounting and viewing angles.
I was considering either this one or the comparable option by Kondor blue – which I can’t speak of bc. I haven’t tried it – but I am in no way regretting my decision to go with the smallrig. The end I mount my monitor on has a little rubber pad, whereas the kondor blue doesn’t – I think it’s one of the reasons the monitor doesn’t move.
This has been awesome to use on my half cage to hold my Ninja V. I mount it on the carrying handle with a NATO rail attached. I can sit my empty half cage down with the Ninja V attached without it falling over, balanced.
🙂 I also attached it to my Zhiyun Crane 3 handle with my Ninja V and a NATO rail and it worked as well.
It is equipped with 1/4″ screws on both ends respectively. Thus, it could attach monitor via the 1/4″ screw on the one end and attach accessories with 1/4″-20 threaded holes on the other end, like cage, NATO Rail 1973, 15mm Rod 1182 and Quick Release Rod Clamp 1976 etc.
Mounted with 1/4″ screw is a rubber cushion which could prevent the scratches of monitor and help to lock the monitor tighter. It features an ergonomic wingnut for great convenience that could help to adjust any angles based on your needs.
Features:Equipped with 1/4″ screws on both ends respectively. Could be used to attach monitor via the 1/4″ screw on the one end and attach accessories with 1/4″-20 threaded holes on the other end. Mounted with 1/4″ screw is a rubber cushion which could prevent the scratches of monitor and help to lock the monitor tighter.
Features an ergonomic wingnut for great convenience that could help to adjust any angles based on your needs.
Well made and does exactly what it’s supposed to. The single knob loosens both ball joints, which also rotate so you can put the slots where you need them, and the center serrated section. The serrated center section allows it to take a good load without slipping.
The single knob also means you have to grab everything in your hand to position it simultaneously, but that’s not usually a big deal. It works exactly like some small machine tool indicator holders, if you’ve seen those- very rigid.
It supports rotation of any angles LOCK TIGHT Tightened with a wingnut quickly and conveniently. It is easy to use and can help you lock tightly. Neednt worry about dropping NOTICE Not recommend for monitor or LED light over 1.
0 kg 1/4 SCREWSEquipped with 1/4 screws at both ends. It could attach camera cage, top plate and Top Handle 1955/1984 on the one end, while attach monitor or video light on the other end SMALLER MODEL This is the smaller model of SMALLRIG Magic Arm with Small Ballhead 2163.
The SmallRig Handheld Kit 3584 is made of aluminum alloy, sturdy and durable, with multiple 1/4″-20 threaded holes to support other accessories. The kit comes with a universal Top Handle 1446 and a NATO Side Handle HSN2427 for quick switching between two handheld shooting modes, hence stable movement shooting solutions.
The built-in T5 SSD & USB-C Cable Clamp is further locked via a knob to prevent accidental disconnection and the baseplate with dual 15mm rod fits accessories such as Lens Support BSL2644, Follow Focus 3010, Matte Box 2660, etc.
Christmas Deals Available. SmallRig SR3298 (3298) Standard Accessory Kit for BMPCC 6K PRO SmallRig Standard Accessory Kit for BMPCC 6K PRO 3298 provides a rugged aluminium-alloy rabbit cage with multiple 1/4-20 threaded holes that support additional camera accessories.
The kit features a built-in T5 SSD clamp and USB-C cable clamp which can be further locked with a knob to prevent accidental disconnection during shooting. Its two tempered films can be easily pasted onto the screen via electrostatic adsorption to protect the camera.
The Worx NITRO WA0220 Driveshare 17” Universal Hedge Trimmer Attachment turns your Worx NITRO 40V String Trimmer into a powerful and versatile hedge trimmer. Dual-action cutting blades slice each branch, twig, and leaf twice—once forward, and once back—ensuring an even cut of the hedges, bushes, and low-lying tree branches on your yard or property.
The approximately 1. 0′ (15/16 in. ) diameter is enough to handle thicker hedge branches and twigs, and the long 17′ cutting length makes for flat, smooth tops and sides on your hedges. While the 10′ maximum reach gained from this attachment lets the user reach up to the tops of tall bushes or the bottom branches of some trees.
And at only 4. 52 lbs. of added weight, it’s easy to hold this Hedge Trimming Attachment up high for some time. Adjustable ConvenienceThe cutting head is adjustable with 10 positions to choose from, so you can attack from almost any angle.
It’s a great feature when approaching difficult to get at areas, and it keeps you from having to contort your arms and wrists into uncomfortable positions while doing so. The Worx NITRO WA0220 Driveshare 17” Universal Hedge Trimmer Attachment is an important addition to your lawncare toolkit, with the power and functionality to get the job done fast and flawlessly.
Experience the NITRO DifferenceWorx NITRO brings gas-like power and performance to battery-powered tools. You get the benefits of gasoline without all the drawbacks, like the cost, the mess, and the fumes.
It’s the better way to do cordless power and outdoor lawn and garden tools.
I do a lot of crafts and small repairs around the house. Over the last few years my husband took ill and my small repairs have now turned into bigger ones. When he was able to still challenge a project on his own.
he purchased a WORX 2 in 1 drill from Home Depot. Sadly for him he showed me this wonderful “saving time” drill. I absolutely loved it! I do not have to use 2 different drills now. which saves mega time.
Jokingly I told my husband that I will keep the drill in the house for safe keeping. He could use my/his drill anytime that he needed it! The reason because when I need a particular tool I could never find it in his shed.
We have recommended this drill to many friends and family. My husband and I showed our/his new drill to our daughter as she makes and sells her own crafts. She loved the drill just as much as I did when my husband first bought it home! For our daughters birthday she received a 2 in 1 drill as well from us.
While repairing our screen door our neighbor came over to assist me with his help. When he noticed my/our drill. his remarks were Wow this drill is nice! Long story short we have told many people about this drill even some employees at Home Depot who have not heard of this awesome tool.
The drill was a special sale and no longer available at the store. That was not a problem for us. we went straight online to the WORX website and ordered a couple more for gifts. I/We have a few other WORX tools and are excited to order more for this spring and summer yardwork.
You can not go wrong with these tools. What really is great about the WORX tools. the batteries are interchangeable. I make sure to charge the batteries up as soon as the project is finished and ready for the next job.
My husband is no longer with us but I can still see his smile everytime that he asked to use “HIS” drill.
I wanted to start off my saying this drill is extremely well built. I had an experiance that involved leaving my drill on the top of my fireplace on the roof. I could not remember where I put it until I went up to the roof and found it sitting on its side.
Here is the amazing thing. It was on the roof for 2 weeks and during that time it snowed 9 inches completely burying the drill under all that snow. Then the snow melted and it rained. Then it snowed again burying the drill again.
2 days later the snow melted and everything dried out. When I went to retrieve the drill it worked perfectly and the battery was still charged. My hats off to the engineers at WORX for designing such a great drill and to withstand the elements like that is beyond anything anybody could imagine.
Also I happen to be an engineer in the plastics field and I will tell you that WORZ uses heavy duty injection molded plastic that just feels right when your using it. I just wanted to share this amazing story and to pay tribute to the quality design of the WX 176L If anybody needs a good drill of this type I would buy it in a snap.
Last thing is I purchased this drill in 2016 and use it frequently and its still going strong and the Lithium Ion Batteries still hold a full charge. Thank you for taking the time to read this.
I purchased this product over a year ago it was such a great product I purchased a 2nd one for my boat. How many time do you drill a pilot hole to prevent splitting and then you change your bit to use it as a screw driver with this product you merely push the button and spin it from drill to driver push again back to drill.
so simple and easy for anyone to use. I highly recommend this product for everyone. I own over 20 Worx products and share all battery powers. Worx is my favorite tool maker ever and would be lost without them.
The Blade-Tech 5″ Molle-Lok Pair with Hardware gives you the convenience and versatility you need when customizing how you carry your gear. The 5″ Molle-Lok is designed for both stability and ease of use, even under the harshest of conditions.
A spring loaded pin and lock system snaps into place, securing the item to you while also offering you the convenience of easily rearranging your gear. Each 5″ Molle-Lok is engineered to be attached to a wide-range of gear, including holsters, mag pouches and light pouches.
Molle-Lok is the fastest way to securely mount gear to your Molle webbing. With a stainless steel, spring-loaded latching system and durable high-strength polymer construction, the 5″ Molle-Lok are like no other when it comes to getting your duty gear up to your vest.
Ranging in sizes from 1. 5” to 5”, the Molle-Lok is ready to mount Holsters, Mag Pouches, or Tasers wherever you’ve got Molle. With a spring-loaded, stainless steel pin at the center of the Molle-Lok’s latching system the Molle-Lok can be quickly undone yet stays secure and locked even during the rigors of duty use.
Love the clip. I work for cdcr. I turned the clip into a double cuff carrier, by cutting a S biner in half. If you guys made attachments ready to go, that would be golden. Possibly a Monadnock baton holder adapter? There is currently no way to attach our state issued batons to a molle carrier vest.
Bought a pair of the Molle-Lok Long. My agency issued me the new Taser 7 along with a Blade-Tech holster. I’ve been having issues with lower back pain and found that the more gear I take off of my duty belt the less pain I go through.
Since I took this approach I have virtually no pain. Anyway, we got issued the new Taser with a belt kit. I wanted to mount it to my outer carrier vest and was told to try out the Molle-Lok attachments.
The Molle-Lok themselves are excellent. However, I think the pairing between the Molle-Lok and the Holster is questionable. There is one center screw attaching the Molle-Lok into a metal sleeve/rivet.
I’m not sure the exact names for the hardware. The other two screws I was able to use attached the Molle-Lok into plastic holes. The screws self-tapped themselves into the plastic holes. My theory is that if I move things around over time the plastic threading might strip out.
It is just a concern for now, I haven’t noticed any failure. However, back to the purpose of this review, the Molle-Loks work great! Excellent build and design. I might just need to find a better alternative for attaching the Taser 7 Holster to Molle.
Hooked right up to my Phlster holster. Ran it on a MOLLE belt for a range day, the holster had some play but was secure throughout the day. I wish there was a way to eliminate play on the MOLLE webbing.
The sales rep I spoke to said there was no guarantee that it would fit my holster, but would be happy to work with me on a return if needed. Great product, great customer service.
Sliding on with ease, Wahl Moser KM1881-7170 Ermila Attachment Combs suit a variety of the companys best trimmers and allow you to exact the exact length you desire with every single usage. Spanning a range between 3 and 25mm, the combs provide total barbering control for the most elite professionals.
Combs Included : No. 1 3mm No. 2 6mm No. 3 9mm No. 4 12mm No. 6 18mm No. 8 25mm Wahl Moser KM1881-71770 Ermila Attachment Combs fit trimmers including the Chromstyle and Bellissima. Sturdy plastic ensures long-term reliability and maintenance of quality with every size comb.
This attachment set on my Wahl clipper makes hair removal and trimming a cinch. I like that my Wahl clipper has longevity, and the blades follow suit with proper cleaning. I use the comb set attachment for hair trimming approximately once every 6 weeks.
I absolutely LOVE these attachments! I cut my husbands hair at home and these combs make cutting his hair a breeze! I cut my husbands hair every few weeks and even use these to keep his beard at a manageable length.
Attachment combs i have ordered said they are compatible with Moser hair-clipper but when i put it on and turn on its very loud and after few seconds the attachment is falling down itself- is it really what it should do? No it is not compatible with Moser.
Features:Provides top and side handheld solutions, suitable for single-armed shootingQuick release design to enhance shooting efficiencyProtects the camera, screen and cablesSmallRig Professional Accessory Kit for BMPCC 6K PRO 3299 features a durable aluminum-alloy cage with multiple 1/4″-20 threaded holes that support additional camera accessories.
The NATO side handle fits the curve of hands for a comfortable grip and is designed for quick assemble and disassembly. The sunhood is easily removable and does not interfere with the flip of the screen, hence a better screen display under strong outdoor light.
The built-in T5 SSD Clamp & USB-C Cable Clamp is further locked by a knob to prevent accidental disconnection during shooting. Besides, the kit provides two pieces of tempered films that can be easily pasted onto the screen via electrostatic adsorption to protect the screen.
It is made up of a ballhead with 1/4’’ screw, a ballhead with NATO clamp and a ballhead clamp. It could attach plate with 1/4’’-20 threaded holes, such as Top Plate 1853, Side Plate 1854 or cage with 1/4’’-20 threaded holes, like a6500 Cage 1889 on the one end via ballhead with 1/4’’ screw, while it could also attach monitor with NATO rail with on the other end via ballhead with NATO clamp.
It could attach cage with NATO rail with on the other end via ballhead with NATO clamp, while it could attach monitor cage on the other end via ballhead with 1/4’’ screw. It features quick release and attachment and could be slid to get the balance of the whole kit.
The monitor mounted on it could be adjusted in different positions and angles via both the ballhead and ballhead clamp. A single wingnut is applied to lock the double ballhead tight directly, and thumb screws on both ends are utilized to lock the devices manually and a spared hex spanner is ready to lock it tighter.
Full Cage for Canon EOS R5 or R6, HDMI and USB Type-C Cable Clamp, Wooden Side Handle with 1/4″-20 Screws, Multiple Accessory Threads and Mounts, Maintains Open Access to Camera Ports, Durable Aluminum Components Add protection and a variety of accessories to your Canon EOS R5 or R6 camera with this Camera Cage with Side Handle Kit from SmallRig.
The kit includes a full formfitting camera cage a wooden side handle and an HDMI/USB Type-C cable clamp. The cage is designed to fit the camera without blocking access to any ports or slots and it features numerous 1/4-20 and 3/8-16 accessory mounting threads a NATO rail strap slots and a shoe mount.
The adjustable wooden side handle mounts onto either side of the cage using two 1/4-20 screws and features accessory mounting threads and a shoe mount. The cable clamp mounts onto the cage to prevent your HDMI and USB cables from pulling or disconnecting.
I wish I could love this the way I love my L bracket from small rig but sadly, this thing is garbage. The screws all need lock tight and the ones the hold the wooden handle are the worst. They allow the handle to move around 1/2″ of play in every direction.
Even when you crank the screws down the handle never feels tight. I’ll probably end up wrapping it with gaffer tape or maybe gluing it once I figure where I want it to stay forever. I guess it was a lot cheaper then a good cage but if this is something you plan to use often, I’d spring for a better one.
This is a great cage and feels very good on the camera. However, if you’re a videographer and own the amazing Canon ef to rf variable nd filter adapter it will block the filter from coming out. Those who own this adapter know you need the clear filter as well (won’t focus correctly with the slot empty).
This becomes a pain when you need to switch filters from indoors to outdoors.
This cage fits my R6 great. Love the anti-twist pins that caused issues when using other cages. For the price, this cage is perfect. The NATO rail on top along with the cord clamp accessory makes for a great rig set-up.
The technical details behind this ball head Mount your monitor or LED lights to your DSLR camera with the SmallRig Cool-Ballhead-V1 Multi-function Double BallHead Shoe Mount & 1/4″ Screw 1135. It features a 180-degree rotatable ball head with a 1/4-20 screw.
It also has a single locking knob for safety and ease of use. This ball head can carry up to 1. 5kgs.
Just what I needed, a light, well made, strong cam mount. around 50mm overall length it doesn’t get is the way nor does it make the overall rig heavy. Not made for full size DSLR cams but does a great gob with sport action cams.
Great concept, small rig is awesome with some of their products, but this one I dont recommend at all. The cold shoe is a tad to small and the ball head at the cold shoe is lose and in reliable so putting on a monitor or anything it comes lose over time and thats to scary to trust.
Can Be Attached to Gimbal Crossbars/Rods, 1/4″-20 Support for Monitors/Accessories, 15 to 40mm Jaw Clamp Opening, 3. 3 lb Load Capacity. Featuring a jaw clamp opening of 15 to 40mm the SmallRig Super Clamp with Ball Head Arm can be attached to the crossbars of gimbals such as the DJI Ronin and FREEFLY MOVI Pro.
The articulating ball head arm provides a 1/4-20 mounting screw to support monitors lights and various other accessories weighing up to 3. 3 lb. The short length of the arm allows you to keep your add-on accessory close.
The super clamp can also be attached to 15mm rods on your camera cage or rig to support a monitor or other accessory.
Excellent material, works great, there is no impossible angle (dead angle) to hold you material. very strong. high quality finishing, very professional look. Can hold load more than expected. Easy to use.
I just use this material on all my gears. Cost vs Quality good.
Achieve dynamic low-angle shots on your next run-and-gun shoot with your Nikon Z5 Z6 Z6 II Z7 or Z7 II camera using the Camera Cage Bundle from SmallRig. The custom-fit camera cage and top handle increase your Nikon’s mounting capabilities to secondary monitors articulating arms or microphones while the FTZ lens adapter support bracket reduces strain on the lens mount.
I bought this to connect a microphone to the cold shoe where it wouldn’t block the screen on my a6400. It worked great for that, but I’ve since decided to use an external mic. But I’m absolutely keeping this rig attached anyway.
It adds a more positive grip for my big hands and provides a lot of protection to the camera body. I didn’t notice this for a week or so – but the design of the bottom section will plug right into my ball head mount without the need for a plate.
All the attachment point options for accessories are very nice. My only gripe is that my fingers hit the lens due to the larger grip. But I’m using a fat lens most of the time and it’s still a better experience than the tiny camera grip.
This cage is a must-have! Build quality is top notch. It is practical and allows to add many more attachments (mic, neck strap, wrist strap), makes it easy to put on a tripod. Adds weight to the system, which helps stabilize when recording hand-held.
The silicone grip is comfortable and when properly mounted, it fits snug and tight. And it has the added benefit of making the camera look bigger.
The krig 6 warzone is one of the most powerful weapons in the game. It has a high rate of fire and is very accurate. It is also a very versatile weapon and can be used in a variety of situations. The krig 6 is a great choice for any player looking for a powerful and versatile weapon.
As the best place to buy iron on vinyl will vary depending on your specific needs and preferences. However, some general tips that can help you find the best place to buy iron on vinyl include: – Checking out online retailers that specialize in selling iron on vinyl. These retailers usually have a wide selection…
Baseball is a bat-and-ball game played between two teams of nine players each, who take turns batting and fielding. The game proceeds when a player on the fielding team, called the pitcher, throws a ball which a player on the batting team tries to hit with a bat. The objectives of the game are to…
A hair mask is a deep conditioning treatment that is applied to the hair and left in for a period of time, typically 20-30 minutes. Masks are ideal for those with dry, damaged, or color-treated hair, as they can help to repair the hair and restore moisture and shine. There are a variety of hair…
The best bait for a chipmunk live trap is a mixture of peanut butter and oats. Place a small amount of this mixture on the trigger plate of the trap, and the chipmunks will be attracted to it and enter the trap. 20 Best Bait For Chipmunks Live Trap 1. Tomahawk Original Series Rigid Trap…
ATV tires for trail riding are designed to provide traction and stability on uneven and off-road surfaces. They typically have a tread pattern that helps to grip the terrain, and a wider width to help keep the ATV stable. 20 Best Atv Tires For Trail Riding 1. Carlisle All Trail ATV Tire – 23×8-12 23×8-12…
Toilet bowl cleaner for calcium buildup is designed to remove hard water stains and mineral deposits from toilet bowls. It is usually in the form of a gel or liquid that is applied to the bowl and scrubbed with a brush. 20 Best Toilet Bowl Cleaner For Calcium Buildup 1. Better Life Natural Toilet Bowl…