20 Best Angle Grinder For Tile Cutting (2022 Updated)

I’m a tiler, I use this tool daily and have 2 them. It’s my go to grinder, hence I have 2 of them. Variable speed is a must in my line of work. It’s a super reliable tool. Guard is a snap on easy to attach or remove.

It’s a light tool as well which helps when you use it all day for miter cuts. Incredibly versatile and simple to use. Grip is fantastic and well balanced. I could go on and on as I have done pretty much everything with this tool and it’s yet to disappoint me.

Highly recommend it.

A good choice for a heavy duty 4 1/2” corded grinder/cut off tool. I use it to grind welds and cut out metal structures that need replacing. It’s just the rite balance of weight and power.

I love the grinder for light duty use. It becomes exceedingly hot for any heavy use, such as taking off 0. 25″x18″ from a piece of 0. 25″ thick angle stock steel. I have to take two breaks to let the tool cool down to finish the job.

Need to do the same when using it to cut 2. 5″ holes into granite, got hot enough to make me choose between putting wielding gloves on or let it cool down. Takes about 30-45 minutes for it to come back down to a temperature that I am willing to handle it again.

Perhaps I chose one that is underpowered for my task, but if you plan to do either of the above, I suggest getting a heavy duty grinder. The variable speed was the selling point to me as i need a lower speed for granite and a high speed for grinding.

That feature works great!.

As I embarked on what will be a long term remodeling of our house, I knew that I would definitely be needing a grinder for a variety of uses. Nothing large, but I also thought I could probably use two grinders to have one setup for cutting, and the other with a grinding wheel or wire cup.

I had looked at the various models DeWalt offered and was thinking of purchasing one corded and one cordless grinder. However, while at Lowes picking up some materials, I decided to look at the grinders and I purchased the DeWalt 4-1/2 inch 7.

5 amps Paddle Switch Corded Angle Grinder DWE4012-2 two-pack set on sale at a reasonable price. These DWE4012 grinders are well made and the 7. 5-amp motor has been powerful enough to work well for several projects that have involved both cutting and grinding.

Each has a removable side handle that can be attached to either the right or left side, as well as a guard that can be spun to position it as needed. The paddle switch makes it easy to control the power.

The threaded clamp nut can be removed and tightened with either a spanner wrench or an allen wrench, the latter which is included with each grinder. It is easy to change accessories when needed. The DWE4012 grinders have been dependable and I do recommend them.

This is my first grinder and have just started welding again. My hands do not get tired from previous grinders that i borrowed. It has a very strong motor for cutting, grinding, polishing and sanding.

I haver had it for 6 month and have not experienced a problem. Please remember i only use it on weekends for repairs and small projects.

I have had the Dewalt 4012 for two weeks and I am not impressed with it. I do not like the allen key used to tighten the spindle. Right now I have a sanding disc for wood that I can’t get off. I am regretting buying this grinder.

You can’t get the disks off easily. Do not buy this grinder.

I was kind of disappointed with my experience using this grinder. I have never had problems with Dewalt products before, and I have a very trusty 4 1/2 inch angle grinder I have tested the limits on with no problems, but on this particular 7 inch grinder, the gear stripped out the second time I used it.

I took it apart to examine, and I think it is due to the arbor housing being made of a thin aluminum ring, instead of thick steel, causing the arbor to move out of place and therefore, the gears also, causing them to strip.

There’s just not enough meat on that part of the grinder to handle the torque of a 7 inch wheel. I think if Dewalt would beef it up there, it would be a great grinder. Come on, Dewalt, I know you can do better! Thanks, Jonathan.

The diameter of handle is rather thick, feels like holding the wider end of a baseball bat. But it is still maneuverable. If this is too large for ya, ya need the longer model with trigger switch that has a slender handle.

I have a 7 amp model by Hercules. I can just feel the difference in the power: 7 amp vs. 11 amp. It grinds significantly faster with the same grinding wheel. I am thinking, maybe I should have started with 11 amp model, but I do not have to change the wheels so often, if I have two grinders.

DeWalt is more expensive, but I feel it is worth it, performance-wise and psych-wise. I am 100% satisfied. Addendum: One thing I noticed from the uploads on YouTube: the guys take apart the grinder to show the innards of a brand-new grinder.

The brand-new grinder had no grease on the helical gear, although the grease is packed in the housing cavity. I checked mine (I have three, two corded and one cordless), and not one had grease on the drive gear and the helical gear.

I took a tiny dollop of grease from the housing, and smeared it over the teeth, and reassembled. They all ran quieter, noticeably. It is an easy guess that the gears will wear faster, until the heat buildup moves the extra grease onto the gears.

I received & used the grinder to remove wood. Attempting to change the disc, I could not locate an Allen wrench port. Those to remove the wheel/disc are round. “Square peg in round hole” just doesn’t work.

I hesitate to really crank on the wheel with unnecessary leverage for concern of damaging the unit. Q: How does the Allen wrench work with this grinder? Or, what type of wrench will work? (Manual did not included anything on how to change a disk &/or use the Allen wrench).

So in if I were you and had your money, I’d buy two. There’s no hander power tool as you can do pretty much anything with them. Just don’t do anything stupid, because they are very powerful and depending on the disc can f you up too quick.

Dagg I’m telling youall stay healthy!!.

Great small grinder, very powerful given the size, and nicely balanced in use. I have been using it to even out poorly finished concrete and my only issue, and a minor one given the price of the unit, is the lack of any option to control the dust when working with cement and masonry.

Works great ! Just like my older one. I am tired of smoking Milwa$$$$’s products ! The last two couldn’t handle the load this old man gave them.. they .also were purchased new. A brand change is on !

This review is based on inspection (unpowered) of two Makita 9557PBX1 kits. Both kits were returned after concluding that issues found could not be resolved by Home Essentials Direct or the manufacturer.

PRO: Reasonable amps & rotational speed (7. 5A/11000 rpm) for DIY projects; comfortable grip — lightweight & small diameter barrel; large paddle switch increases safety; not limited by battery life of cordless models; kit includes all the essential items required to start use immediately.

CON: Continuous operation feature not reliable as the ‘lock-on’ switch is easily overridden with the slightest pressure on the paddle switch. ‘From the Mfr’ description on the Home Essentials Direct website is misleading — wheel guards are not ‘tool-less’ & there is no AC/DC option switch.

The hand covers half of exhaust vents — concerns (unverified) regarding overheating the grinder during continuous usage. Home Essentials Direct sent a replacement PBX1 kit, but both kits were returned after inspection revealed that identical issues existed with both kits (unreliable lock-on switch; misleading claims regarding tool-less wheel guards).

I will consider other grinders, but may return to this Makita 9557PB grinder, as none of the online test reviews of this grinder view my concerns as critical.

I bought this a year ago and like absolutely everything about it. It came with 4 grinding wheels, one cutoff wheel and two safety guards. I used the tool for in a welding project in prepping (cutting and grinding) 14-guage 2″x2″ angle iron.

It performed the job well. Compared to a similarly spec’d Dewalt grinder I’ve owned for years, this was a lot less noisy. The safety latch is easy to use as well. The aluminum metal case is unlike any tool I’ve ever owned, it is solid, functional and cool looking.

I work in the automotive restoration industry. I use an angle grinder to smooth welds, grind off paint and rust, cut metal, and I use it hard. I have owned grinders from just about every manufacturer that you can think of, from cheap to expensive.

In a word, this Makita angle grinder is AMAZING. The balance is very good. There is zero vibration when you press the button. The switch is in a very comfortable place to depress. The grinder is very powerful, and doesn’t get hot, like other grinders do.

The air/cooling vents were located in a location that isn’t covered up by your hand while using this Makita grinder. This grinder comes with a foam lined metal case, that I’m not going to throw away like I always do with the cheap plastic cases that usually comes with power tools.

I am not only impressed with the quality of the Makita angle grinder, but I’m very impressed with the case that it comes in. I will be buying another, just in case something in the industry changes, and this same model becomes unavailable.

I purchased the “angle grinder only” option, ASIN B00RVZ7DNO. I would have given this a 5 star review if not for the lack of provided information regarding exactly which guard is included. After receiving the unit, I found that the included guard was way too deep to be used with a standard 7/8 arbor flap disc or grinding disc.

It’s so thick that you have to hold it at a 45 degree angle, otherwise the corners of the guard will touch and scratch the work surface. Another reviewer has stated the same thing and even went through the effort of cutting his guard down on a band saw.

The good news is that I learned that Dewalt makes several different guards that fit this unit, and one of them is the appropriate thickness for these type of discs. For some reason, Dewalt makes it confusing and difficult to find any detailed information about the guards, so I wanted to share what I learned so that it may help future purchasers.

SEE THE ATTACHED PHOTOS The included 4. 5″ guard is actually the N309159, which is called the “4. 5in / JUMBO FLAP” guard. I subsequently purchased the N306360 4. 5″ guard, which is perfect for using with standard non-hubbed flap-discs or grinding discs.

Further, the correct 4. 5″ Type 1 cutting guard for this grinder is N311419.

Bought mine last fall and was initially happy with its performance, but that didn’t last. I use mine frequently for cutting metal and grinding welds and my original Mastercraft one lasted more than 10 years of weekend cutting and vehicle repairs.

I expected a name brand one to do at least the same. I swap disks between cutting and grinding frequently, but was still only halfway through the supplied grinding disk cleaning up a sheet metal weld when the motor arched, slowed down noticeably and then died mid project.

At less than one year old, this is completely unacceptable.

Very handy little grinder. It can get into places bigger grinders can’t. The best feature I like is the removable protective shield. In fact that’s the main reason I bought it other than the great price.

With the shield removed you can still get the job done in very restrictive areas. Although this is a great feature be advised it can be much more dangerous to use by someone not familiar with grinders.

Wear plenty of protection especially for eyes and hands.

This is a fantastic grinder, well worth the sale price. This did not come with any grinding or cutting wheels, but is still a great deal. Ive used it with a wire wheel and there is very little vibration from the grinder.

My old 4. 5″ grinder vibrated so bad you couldn’t use it for very long and it didn’t have the power that this Skil grinder has.

I bought this last month to cut quarry tiles for the outside of the house, along with a diamond cutting blade. I could not have done the job without it. The angle grinder cut through the quarry tiles like butter, with virtually no chipping.

The angle grinder was easy to use and not heavy, so it was simple to make accurate cuts to the quarry tiles. I also used the grinding blade to smooth down some concrete which was protruding underneath the door facia.

Again because the grinder is both light a robust, it make short work of this despite the tricky angle. All in all this is now an indispensable tool in my tool kit.

This is my first time both buying and using an angle grinder but my very blunt small hack saw just wasn’t cutting it! The instructions are not overly clear but after a large coffee and no distractions I managed to work out how to put it together.

The handle is simple enough but fitting the safety cover and blade took me a while. The instructions are for serval different types of grinder which I didn’t think was immediately obvious. Once fitted properly (make sure you have the securing nut on the correct way up so the blade doesn’t move) this glided through the pipe and brackets I needed it to.

Very pleased.

Be very careful when ordering this item! There are two versions 110V/240V, on the website they both carry the same number MAKITA GA4530R on the Website only the picture differentiates between the two.

On Screwfix’s computer system they differentiate by using GA4530R/1 for 110V, and GA4350/2 for 240V. Guess who ordered the wrong one, as soon as I opened the box I realised I had the 110V, not the one I wanted! Fair play to screwfix, they changed it for a 240V with no problems.

If only all companies were that easy to deal with, this is why I always use Screwfix they look after their customers, which in turn deserves loyalty, they’ve certainly got mine.

OUTSTANDING. very powerful. very light. the switch is solid. overall build is very solid. and of course the xlock feature is very very good. i have been researching possibly getting two different grinders so i dont have to switch wheels so often.

Now I’m all good. I find the Xlock mechanism very solid and well built and safe. The main problem I have is the limited availability and styles of Xlock grinder wheels and brushes. In my case, I’m good because my boss lets me use his big Milwaukee and I can put any wheel on that I want which is great for the odd job once in awhile.

Overall glad to take the plunge and own the Xlock.

Bought this about 7 months ago, have been using it at work since. It is very ergonomic like all Makita grinders. Light and comfortable, very easy to control and and do precise work with. It’s cordless too though! I will definitely be adding the variable speed version to my collection at some point.

Highly recommend this version with the switch, not the paddle. I personally think the paddle stinks.

I got the one with the standard threaded spindle. The X style is neat, but not compatible with traditional mount discs. The tool works as it is supposed to and the brushless motor has much better battery life than the old brushed motor.

The tool is comfortable in the hand and well made. I wish I could have the paddle switch type but none available at the time in store. All in all, a great portable grinder.

I purchased this tool in April 2022. So far, I have used it to cut PVC for a bathroom remodel, copper pipe for a small-scale kitchen remodel, for grinding out cracks on a retaining wall repair, and similarly for grinding out cracks for driveway repair.

5 amp-hour batteries pretty good for battery life, only changeout needed was during the driveway repair, but this was also during a pretty hot day. I like the x-lock system for easy change out, holds securely.

All in all a good tool and system.

Overall this is a very powerful professional quality angle grinder. I bought it to replace my heavily used Craftsman angle grinder I bought back in 1981. The trigger switch on the Craftsman went out for the third time in the life of the 35+ year old tool and I could no longer get the part to replace it.

It’s a real shame because I thought that thing was going to last forever. Anyway, the Makita seems like a very nice tool, the only issue I have with it is the weight. It is considerably heavier than other large angle grinders I have used including the Craftsman grinder.

At my age, you can guess because I was 18 when I bought the Craftsman. It is going to be a chore to hold it up for any great length of time. That is fine for grinding welds, but extended use on wood siding is not going to be easy.

That is not the fault of the tool, but I do wish it were a pound or two lighter. If it lasts half as long as my other grinder, it will outlive my working days.

Never any doubt that the Makita grinder would be first rate. Since it is a less sophisticated version there is a higher likely hood of increased lifespan. The 7 in. model is quite capable of supporting alternative 9 in accessories as needed because they share so much between models.

I initially was looking to get into the -much- lighter weight Hitachi, but after a bit more contemplation it seemed that wouldn’t be the smartest move when choosing this type of tool. If someone else were buying the tool, and providing replacements the Hitachi/(updated manufacturer) would have been OK, but since I’m not using it on a full-time basis (and providing my own tools) the Makita GA series was a smarter choice all together.

I’ve had this item for a couple of months now. This is a well balanced heavy duty grinder you can lean into to get the job done quickly. Start up torque doesn’t try to rip the machine from your hands (no its not a soft start) like a lot of grinders this size.

I use it with cutoff wheels, grinding wheels and resin disc. Does a fantastic job with any attachment I’ve put on it. I like that the guard is easy to reposition with a wide swing range.

Great little unit. Stands on its own without the battery. Nice anti vibration handle. Need the included hex wrench to move the guard, unfortunately, but worse there’s no on-tool storage clip or hole for the wrench.

Likely I’ll just use a magnet to stick it to the pin wrench so it doesn’t get lost in the mix.

Nice solid tool. I find myself reaching for this tool a lot. The other day I used it to quickly cut heavy wire (with a cutting disc. )for scrap out. The day before we used it (with the sanding disc. ) for an eraser when the deck layout (cabinets) was changed leaving a nice clean error-less surface for the next layout.

Cleaning up concrete surfaces and flush cutting band metal ties and not having to drag 100′ of chord around with it. With the sanding disc this is my favorite tool for scribe contouring cabinets. Without a doubt a tool you just don’t want to be without.

Top loaded in my Bosch L-Boxx stack as I use it pretty much every day. Great balance and the body of the tool is stout and comfortable to hang on to for large gnarly hands. Love it.

I deliver for a machine shop that also manufactures boat docks and lifts. Most deliveries are to remote locations, and many are without power. The Bosch cordless grinder makes light work of cutting stubborn bolts when disassembling old steel boat docks, and with a wheel change, I can buff out minor scratches to the new aluminum docks before installation.

18v gives plenty of power to perform the light cutting/grinding, and having other Bosch 18v portable tools, allows utilization of multiple batteries if needed.

First off, WOW on amazing and blazing fast Delivery. We use these in our sheet metal fabrication shop and our guys just love the ease and durability. Will be recommending you to our customers as well.

Thank you.

I’m a general contractor who is doing more granite and tile lately. I needed a 4″ mini grinder with variable speed to edge and polish granite. Diamond disk polishing pads need to run at a slower speed for best results.

This tool is perfect for this application. I’ve been buying from CPO for a number of years now and have never been disappointed.

Easy to use and convenient. This is now my first choice angle grinder. Its 8500 RPM top speed is easier to control and handle than my 11000 RPM, 7. 5 Amp plug-in grinder. It has a continuous speed control dial that ranges from 3000 RPM to 8500 RPM.

The no-lock-on paddle switch with lock-off tab is very easy to operate and the unit has a very ergonomic feel. The brake reduces rotation to zero within about 2 seconds of releasing the paddle switch.

This grinder, in my opinion, is the cat’s meow.

I don’t know why I didn’t buy this earlier. The variable speed allows for more control and precise work without excessive heat. The electric brake works great. I get decent runtimes from my 4AH batteries.

I tried 2AH and 3AH batteries and found runtimes to be shorter.

I’ve been using Makita tools for years. This grinder is the latest addition to my 18v tool collection. The quick release guard is a nice design. The paddle switch and brake are awesome. Makita tools are pricey, but well worth the money.

My top of the line Makita 9565CR died whilst in the middle of Raking out a house. Gutted as I’d only really used it around 3 times (not impressed Makita by the way, now I have to pay more to get my original one repaired.

It should have lasted 10 years!). Needed a new grinder fast and bought this as it was the only one my local store had in stock. Nice grinder. small but that can be handy when raking out. Fits my Herzo Dust extractor guard very well.

managed to finish the rest of the Job. only had it two days so cant comment on reliability.

I’m a welder and I love this grinder! It gets a thorough kicking every day and is put away wet, so to speak. Did an inspection after 3 years of use today and the thing is immaculate internally. I really do pound this thing and it’s as good as ever.

Bought a 110V Bosch at the same time (as Screwfix didn’t have the 110V Makita in stock ☹️) and that gives me considerable trouble. I’ve had a few grinders of all makes over the years and this is the best yet!.

Bought this grinder mostly to sharpen my mower blade. It was on sale, so I grabbed one. It has very good power for my use, in fact I have to be careful to go lightly so I don’t take too much metal. It seems pretty well made and with the side grip easy to handle.

I got the screw on type grinding disk. Glad I did because I cannot see how the pinch type works on it. Probably just me but if I use the two-piece pinch hardware with a pinch type of disk it places the disk onto the threaded section of the spindle and it cannot be centered.

If I remove the pinching piece that goes on first the disk will go over the machined portion of the spindle and fits tight. So, what is that one pinch piece for then? Also bought the “better” Hercules screw on disk and the grinder really vibrates with it.

Watched the disk as it spun down and saw it was out of round. So much for better. Just bought the cheaper Warrior screw on wheel, will see how it works.

I have had this tool several years and used it for cutting and grinding metal. Here is something to watch for if you use it for sanding painted wood. I bought a 7” sanding disk and coarse sandpaper disks.

After a few hours of sanding painted OSB boards it quit working. I repeatedly pulled and released the trigger and it only started once. I figured the switch was bad, so I removed the screws and side cover to access the switch.

I pulled the switch out and saw it had a removable side cover. Inside I found an eighth inch ball of paint dust stuck between the contacts of the switch. I cleaned the switch, and the tool has been working fine ever since.

This angle grinder is well constructed for durability, safety, and ease of handling. I only had this tool for a short time; however, I’m very impressed how well it handles cutting through both the thin and thick coated metal wires of a shelving unit.

It is well balanced and has sufficient power to cut through the wire shelving with ease. The safety shield and side arm are sturdy and well placed to allow easy access for cutting or grinding the substrate while holding the grinder steady and keeping the operator safe from sparks and flying debris.

The 8 amp motor is powerful enough to avoid overheating the angle grinder. I would certainly recommend this tool and would purchase it again if I ever need a replacement.